Price on the app only:
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
7" Color TFT LCD Car Rearview Monitor for DVD Camera VCR
7" LED Backlight Color TFT LCD monitor.
Full color LED backlight display.
With 2 AV input.
AV1 connects to car DVD, VCR and other video equipment.
AV2 to car backup camera.
Parking rearview priority: The monitor will start up automatically, and synchronously display the video from rearview camera when you're backing your car; the monitor will close itself after backing. Scenes will cut to rearview camera automatically while you're backing the car and change back to the original scene after that.
Screen ratio 16:9/4:3 adjustable.
2 ways to install: standing or mounting.
Low power consumption.
No Audio input or output.
Comes with an IR remote controller.
Screen Size:7 inch
Display Component: Color TFT-LCD
Number of Dots: 480W * RGB * 234H
Contrast Ratio: 100:1
Response Time: B→W 30ms W→B 10ms
Video Frequency: PAL/NTSC
Power Consumption: Around 8W
Video: Two way video input
Product Dimensions: 195*135*25mm (L*W*D)
Product weight: 379g
Package dimensions: 212x155x93mm
Package weight: 704g
1 x 7" Car Monitor
1 x Holder
1 x Braket
1 x Video & Power Cable
1 x Remote Controller
1 x User Manual
Questions & Answers
A It is 800 * 480 resolution
A It is 6 pin mini DIN，and it is male .
sorry they didn't give you a manual. Maybe they assume you'll be aware of USA standard wire colorings, YELLOW RCA for video in, comes with both yellows so you don't need a gender changer on your VIDEO-IN line, also the black wire for negative power, red wire for 5 to about 15 volt DC + in to power the unit, and BLUE i… see more sorry they didn't give you a manual. Maybe they assume you'll be aware of USA standard wire colorings, YELLOW RCA for video in, comes with both yellows so you don't need a gender changer on your VIDEO-IN line, also the black wire for negative power, red wire for 5 to about 15 volt DC + in to power the unit, and BLUE in for well, I don't know what, probably to send power OUT to a camera or an indicator bulb. You will find this to be a very forgiving unit, I've used many of them for office workers to monitor lobby cameras and so forth. Unit has a very nice range of contrast and brightness. Only drawback is.......the power on and off must be held down a specific short push or unit won't turn on. Good luck with your installation. These things last forever and can take abuse, dropping, etc. they take a lot of voltage ranges without damage so you can power one with any old DC plug in wall transformer unit of 6v, or 9v, or 15v, not strictly limited to 12 volts DC in. see less
By R. Heath on February 5, 2018
Positive is he red one which has the fuse
By Ali Altakyah on January 24, 2018
if you're not going to use in the car will need to use a voltage adapter, if you connect it to the car directly to the dc feed truck, bring bring the wires, one red one black is the positive which is negative and one that can be yellow or blue the remote that comes from the dvd player does so automatically turn the screen.
By Pedro Fermin on February 10, 2018
Yes it is
By Sakura Watabe on September 29, 2017
it will go to blue
By RICHARD BRUNO on February 15, 2018
No RCA only video.
By dong ho row on May 13, 2018
By Chavira on May 6, 2018
If your camera has video output if it will work, but remember that you need a source of power for the monitor works with 12 Volts.
By Pedro Fermin on May 4, 2018
I powered mine off a 12v 5000mah battery and it lasted well over an hour, never reached its max so I hope that gives an idea.
By Jackchop on April 28, 2018
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contactsopen this forum in full page
based on 734 Customer Reviews
Share your thoughts with other customers and get Tomtop Points, the first 5 reviews get DOUBLE Tomtop Points!Write a Customer Review
By harold c. bacon
July 27, 2017
A very nice monitor - rotatable screen and two inputs - color is great - I have used it for the Raspberry PI with desktop mods and it works great - I have security cameras and this is the perfect monitor for the system - small and light weight. Comes with a frame you can mount on a surface or the foot/tilt shown in the picture.
By r. boccio
July 21, 2017
I ordered this monitor to hook up to my BOSS DVD Player in my van so that kids had a screen to see a movie or to see what music track was playing. Hookup is very easy, even though the instructions are basic to say the least. Red wire to +12v, Black wire to -12v, Blue Wire is hooked up to a backup camera sense signal so that when the camera comes on, the monitor will automatically switch to the camera input. I did not use this cable as I do not have a backup camera, I just left it as is. There is no power on this cable so you do not have to worry about it shorting out to anything. The composite video cable gets plugged in from the source. I wired my monitor right to the power harness for the radio so that it turns on and off with the van and ran the cable under the dash out of the back of the radio area, looks clean and allows the monitor to be moved if needed. The monitor is by no means a high resolution monitor, but it gets the job done and kids really do not care about the resolution so long as they can see the movie and subtitles if enabled, both of which are very usable on this monitor. If you need a cheap monitor for the kids, this will do just fine and it is cheap enough to replace should something happen to it.
July 21, 2017
By jorge a morales
July 20, 2017
By kenneth hardin
July 18, 2017
July 13, 2017
By brett cummings
July 13, 2017
July 7, 2017
Awesome screen, works great with a backup camera system. Trigger wire works exactly as it should, and automatically turns the monitor on when I put it in reverse. There are multiple ways to install it with the included bracket or the case that can be installed into the back of a headrest. The bracket itself can be attached to the monitor in to different ways, either by screwing it into the bottom of the monitor or there is a adjustable slide area on the back of the monitor that you can attach to as well, depending on your mounting situation. There is a double sided tape that comes with it to stick the bracket to a dash, but you should plan on also using a couple of self tapping screws to secure it properly, as the double sided tape doesn't seem like it would hold all that great. One issue that I did have was the plug that comes from the monitor is a little delicate, and you need to be careful when attaching that plug as I bent some of the pins inside very easily. IMHO, I think that they should of just run the power, ground, trigger, and video wire directly off of the monitor, instead of having an extra plug, but it isn't that big of a deal. Picture quality is fine, not HD by any means but it is great for a backup camera or keeping the kids occupied on long trips. There are two video inputs, one specificly for a backup camera, and one for a dvd player or some other type of video. There are two speakers on the back side, but I have not yet tried to get sound out of it, so I'm not going to comment past that. All in all, its a great monitor, I would purchase again in the future if needed.
By gerald h.
July 4, 2017
By jim seebeck
July 4, 2017
June 9, 2017
Image resolution is good, able to adjust brightness and image orientation. I like that when power is applied to the blue signal wire (it can accept a 12 volt signal, not sure how low a voltage it can be to trigger it though if you want to use it for something else) that not only will it switch to AV2 for my backup camera, but it will also power on the monitor if it's off (as long as you have it supplied with 12 volt power, I have the power wired in to a circuit that is on when the key is on), and then once the signal is removed it will turn the monitor back off, if it was off to begin with. So you do not have to remember to turn on the monitor first before it will switch the input. I have the blue wire connected to the backup lamp power to provide the signal for when I am in reverse.
June 7, 2017
This is a decent-sized monitor with good viewing angle. The anti-glare texture also helps. About the only issue I've had with it is the brightness needs to be turned up for daytime and down for night. I use it as a rear view camera since the work body on my truck does not permit conventional mirrors. I keep it on when driving for safety. Power draw is under 300 milliamperes so it is also efficient.
June 6, 2017
By ron blevins
May 18, 2017
I installed this monitor in the sunvisor of my 2013 silverado crew cabe that did not come with a backup camaera. I took out the sunvisor and removed the inside materials to allow the monitor to sit almost flush. The monitor was easy to wire up for me. Black is ground, red is power that I tapped into a positive wire only with the engine running and the blue wire that triggers the monitor on when reverse is selected. For the small price I paid this monitor gives me what I needed. The color is ok not HD but when backing up you really want to see the objects behind you in my case my black lab that likes to run around my truck when I get home. I also use this setup to hook up trailers I use at work and home and that has turned that chore into an easy one person deal for me without getting out of the truck. I would buy another moniotr from these guys as what I got is what they described. No problems so far. Thanks again!
May 11, 2017
By philip p keutzer
May 11, 2017
By j. c. ramirez
May 11, 2017
I bought this for the low price, but didn't expect great quality. Fortunately it has both. My wife is always bored when I fly my FVP quad. With this monitor, she can see what I'm seeing during the flight. I modified it by soldering an XT60 Lipo adapter, and now it's totally portable. I would definitely recommend it for FPV use.
By r. seward
May 3, 2017
Great picture, too bad it's just a monitor. There's one anomaly: The flat base is NOT square with the mount. It would be a disservice to most cars to use the flat base because of that error. If you look at it from the side or top, you can see it right away. I would not use that mount. There's a receded mount included for the brave who want to do a headrest mod -me-. I'm going to mount that to a clear part of my dash using foam double stick tape and the four screw positions in the base. -don't do it if your making car payments still-. *Except for the cheap base, not worth marking down a star due to the great picture quality and built-in controls for landscape/portrait, brightness, contrast, and more. Great price and recommended. I may buy another one.
May 2, 2017
Great little monitor. Love the snap-in bezel that's included for making your project looked finished. Can't speak to the arm mount as mine is installed in an enclosure. I'm also pleased with the image flipping options (flip horizontal, flip vertical, flip horizontal&vertical, and normal) as I'm using it for a photo booth live display (mirroring makes it much easier for people, especially with a few drinks in them). Easy to wire up, just needed a 12v AC wall wart to power it up (since it's not going in a car). Also used it as a raspberry pi monitor and worked great. Overall great for the low price.
By nothing but time
May 2, 2017
Top Sellers More
Your question has been submitted successfully
Please activate your account first. We will resend the activation email to help you complete your registration.
OUR SITE RUNS OF COOKIES