Price:
€
288.29
Loading...
Ship to
plug:
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Model | UTD2012e | |
Channel | 2 | |
Bandwidth | 100MHz | |
Acquisition modes | ||
Real Time sample rate | 500MS/s | |
Equivalent sampling | 50GS/s | |
Average | 2 channels simultaneously, can counter the average of 2 n times.and n=1~8 positive integers can be selected. | |
Input | ||
Input Coupling | DC, AC, and GND | |
Input Impedance | 1ΜΩ±2%, in parallel with 20pF±3pF | |
Probe Attenuation Factor | 1×,10×,100×,1000× | |
Max. Input Voltage | 400V(DC+ACpeak、1ΜΩinput resistance)(10:1 probe attenuation) | |
Channel Isolation | Over 40:1 | |
Channel Time Delay(typical) | 150ps | |
Horizontal | ||
Interpolation | sin (x) / x | |
Memory Depth | 32K | |
Horizontal Scale (s/div) | 2ns/div ~ 50s/div, step by 1-2-5 | |
Sampling Rate / Relay Time Accuracy | ±50ppm(any≥1ms time interval) | |
Horizontal Display | 12div | |
Interval (△T) | Single:± (1 interval time + 50ppm × reading + 0.6ns) | |
Accuracy (full bandwidth) | average≥16 : ±(1 interval time + 50ppm × reading + 0.4ns) | |
Vertical | ||
Vertical Resolution(A/D) | 8 bits (2 channels simultaneously) | |
Horizontal Sensitively Range(V/div) | 1mV/div -20V/div(in BNC) | |
Displacement Range | ±10div | |
Vertical Bandwith | 100MHz | |
Low frequency response (AC coupling, -3dB) | ≤5Hz( over BNC) | |
Rais Time (BNC typical) | ≤3.5ns | |
DC Gain Accuracy | As Vertical sensitivity is 1mV~5mV/div:±4% (acquisition or average value acquisition modes); |
|
As Vertical sensitivity is 10mV/div~20V/div:±3% (acquisition or average value acquisition modes); |
||
DC Measurement Accuracy(average value acquisition modes) | Vertical displacement = 0 , and N≥16: ±(5%×reading + 0.1div + 1mV)and select 1mV/div or 2mV/div; ±(4%×reading + 0.1div + 1mV)and select 5mV/div; ±(3%×reading + 0.1div +1mV)and select 10mV/div~20V/div. |
|
Vertical displacement ≠ 0, and N≥16: ±[3%×( reading + Vertical displacement reading)+(1%×Vertical displacement reading )]+0.2div) |
||
set from 5mV/div to 200mV/div + 2mV; setting value from 200mV/div to 20V/div + 50mV。 | ||
Voltage difference (ΔV) measurement accuracy (average acquisition method) |
Under the same setting and condition, take the averege value for ≥16 capture waveform, | |
voltage difference between any two point of the waveform(ΔV):±(3% × Reading + 0.05div ) | ||
Trigger | ||
Trigger Sensitive | 1div | |
Trigger level range | Internal | ±5 divisions from screen center |
EXT | ±3V | |
Trigger level average(typical)accuracy aims to the signal up and dowm times≥20ns | Internal | ±(0.3div×V/div)(±4 divisions from screen center) |
EXT | ±(6% set value +40mV) | |
Trigger ability | Nomal/Scan Mode、Pre/Delay Trigger,pre-trigger depth adjustable | |
Release range | 100ns~1.5s | |
Set the level to 50% (typical) | Operate when Input singnal frequency≥50Hz | |
Edge Type | Rise, fall, rise and fall | |
Trigger Mode | (>, < , =) +Bandwith,(>, < , =) -Bandwith | |
Trigger Level | 20ns-10s | |
CH1 Trigger | Edge, bandwidth | |
CH2 Trigger | Edge, bandwidth | |
Measurement | ||
Cursor | Manual | △V, and △T between cursors, 1/ΔT(Hz) |
Track | Voltage value and time value of the waveform point | |
Auto | Allow cursor appear when auto measure | |
Auto Measure | Vpp, Amplitude, Vmax, Vmin, Vtop, Vbase, Vmed, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay A→B , Delay A→B , | |
Waveform Math | +, -, ×, ÷, invert | |
Storage | 20 waveform、20 kinds of setting、BMP | |
FFT | Window | Hanning、Hamming、Biackman-Harris、Rectangular |
Sample point | 1024 points | |
Lissajous Figure |
Bandwidth | 100MHz |
Phase Difference | ±3 degrees | |
Output Voltage(Typical) | about 3V,Peak-to-peak≥1MΩ load | |
Frequency (Typical) | 1kHz | |
Display | ||
Display | 7inch TFT LCD, 800×480 pixels RGB | |
Waveform and grid | adjustable light for waveform and grid | |
Language | Chinese Simplified, Chinese Traditional, English, Portuguese, Spanish, French, Dutch, German, Russian | |
Other | ||
Waveform Record | 1000 screen,Can be temporarily stored or stored to a USB flash drive | |
Frequencycouter | 6-bit hardware frequencycouter | |
Screen Copy | one key copy screen function | |
Frequency (Typical) | 1kHz | |
Standard Configuration | USB-OTG:for digital storage and communicate with a PC | |
Plug Type | EU / UK / US (Optional) | |
Power Supply | 220V (EU/UK plug), 110V (US plug), 50/60Hz | |
Power Consumption | < 50W | |
Fuse | 2A, T class, 250V | |
Temperature | Working Temperature :10℃~+40℃; Storage Temperature:-20℃~+60℃ | |
Humidify | <35℃:90%RH,+35℃~+40℃:≤60%RH | |
Altitude | Working altitude 2,000M; storage altitude15,000M | |
Item Size | 350 * 145 * 115mm / 13.8 * 5.7 * 4.5in | |
Net Weight | 1793g / 63.2oz | |
Pacakge Weight | 2644g / 93.3oz |
Questions & Answers
Discussions
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contacts
open this forum in full pageThere are no customer reviews yet.
Share your thoughts with other customers and get Tomtop Points, the first 5 reviews get DOUBLE Tomtop Points!
Write a Customer Review