This pen replaces ink with filament which melts at a high temperature to create a 3D object instead of just an idea on paper. It can be used to draw in the air or on surface as well as tracing objects on paper. Use this pen to create any 3D objects you like. The only limitation of 3D drawing is your imagination.
Features:
3D pen for freehand drawing of 3D objects.
More lightweight and compact.
Ergonomic design for optimum handling.
Silent design and intelligence standby modes, extending the lifetime of the pen.
Adjustable writing speed & temperature and optional filament ABS or PLA.
Good heat dissipation design, better to avoid overheating and causing skin injury.
Integrated and compact design, electric heating nozzle is convenient for maintenance and replacement.
It can be used to draw in the air or on surface as well as tracing objects on paper.
Suitable for painting workers, product designers, hobbyists, children, students, creative individual, etc.
Operating instruction:
Plug the adapter.
Press the wire feed button, then the pen starts preheating. When it reach the target temperature, means preheating has finished.
Put filament into the import hole, keep pressing the wire feed button, the filament will be sent into the hole by the inner motor.
When the filament out of nozzle, enable to draw what you want.
Slide the speed button, you can freely change the filament's output speed.
Keep pressing the wire unload button, the filament can automatically withdraw.
Note:
1. When feed the filament into the filament hole or drop out from it, only keep pressing the feed button, do not push the filament as the pen will send the filament automatically. And remember to cut the end of the filament neatly after withdrawing the filament from the hole.
2. The painting pen nib and the near area are high temperature area, the highest temperature can reach 250 degree, do not touch the nib with hands or touch others objects with the nib.
3. This device is suitable for children over 8 years old and adult use. Children should use it under the tutelage of adult.
Specifications:
Input: AC 100-240V, 50/60Hz
Output: DC 12V, 3A
Nozzle diameter: 0.4mm
Pen color: Pink, blue, green, silver (optional)
Printing filament: 1.75mm ABS/PLA
Filament color: Black, blue, orange
Discharging way: Fused deposition modeling
Molding mode: 3D modeling
Writing speed: Adjustable
Heating Temperature: 160°~ 250°
Housing material: ABS
Adapter: US, EU, UK, AU (optional)
Adapter cable length: 170cm / 5.57ft
Item length: 17.3cm / 6.81in
Item weight: 47g / 1.68oz
Package size: 22 * 12.4 * 7.2cm / 8.66 * 4.88 * 2.83in (L * W * H)
Package weight: 330g / 11.64oz
Note: Open the black button can adjust the temperature, clockwise rotation for lowering the temperature, anticlockwise for increasing the temperature. But you are NOT recommended to adjust it.
Package List:
1 * 3D printing pen
1 * Power adapter
1 * Pack of ABS filament(3 colors)
1 * User manual (English)