Building a high performance FPV quadcopter for racing or freestyle has never been easier. This tightly integrated systems packs the FC, ESC, RX, VTX, PDB, CURRENT SENSOR and OSD into neatly stacked boards that can be easily serviced or upgraded. The pinned board interconnects offer a clean wire free look and the compact stack can fit even the tightest builds with easy. We have carefully combined some of the best FVP technology in our arsenal into a tightly pre-assembled package that offers the fastest way go from starting a new build to FPV Flight!
Feature:
This item: F4 Magnum V2 All In One FPV Stack Tower System Including F4 Flight Controller 4 In 1 BLHeli-S Bullet 30A ESC VTX FrSky XM+ Receiver And Antenna
6 in 1 Main Board - F4 FC + Betaflight OSD + LC Filter + 5v Regulator + Blackbox + Buzzer.
48 Chanel 5.8ghz Switchable Power VTX Board: allows for easy change of VTX channel/band via push button. Also transmit power is switchable from 25mw to 200mw.
Genuine FrSky XM+ receiver is included with 16 channels with RSSI. It possible to connect other brands of Serial or PPM via the dedicated RX pads.
The ESC system is comprised of 4 in 1 30A continuous Bullet ESC's using top quality MOSFETs and running BLHeli_S firmware.
DSHOT, Multishot, Oneshot 125. The onboard current sensor monitors mAh consumed and pass the information to OSD for an accurate way to monitor battery level and peak power consumption.
Specifications:
Brand Name: EMAX
6 in 1 Main Board
Flight controller (OMNIBUSF4 Firmware)
STM32F405 MCU
MPU6000 accelerometer/gyro (connected via SPI)
On-board Betaflight OSD
On-board Buzzer
Integrated 5V/3A BEC
Integrated LC Filter
Dedicated PPM/ Sbus receiver input
On-board high-capacity 16mb black box flight log recorder
3 UART pads
Addressable LED pad
VTX Board
Frequency band: 5362-5945MHz
Channels: 48(band/channel chart can be found in Manual)
Transmit power: Switchable 25/200mw
Supply voltage: 4.5V-5.5V
Antenna port: 50Ω ipx ufl connector
Antenna: 1pc lightweight 5.8g dipole 100mm whip
1pc SMA extension 80mm length
4 in 1 ESC and Current Sensor Board
Continuous current 30A and 40A burst per motor
Supply voltage: 2-4S Lipo
Silabs EFM8BB21F16G 50mhz MCU
BLHeli_S firmware
Supports DSHOT, MULTISHOT,ONESHOT125
Top quality MOSFET
3oz high TG PCB board
On-board current sensor
Receiver Board
Genuine FrSky XM+ receiver
D16 Mode
16 channel SBUS
RSSI on Channel 15
Package information:
Package size: 14.5 * 9 * 4cm / 5.7 * 3.6 * 1.6in
Package weight: 145g
Package list:
1 * Tower
1 * Receiver
1 * B-017 XT60 female connector
1 * Hot-shrinkable tube Φ4.5*0.2*L20mm red
1 * Hot-shrinkable tube Φ4.5*0.2*L20mm black
1 * Silicon wire 14AWG L=80mm red
1 * Silicon wire 14AWG L=80mm black
1 * Antenna adapter with SMA female connector L=80mm
1 * 5.8G Dipole Whip antenna L=100mm
1 * Plug with wire for LED_Strip
