This pen replaces ink with filament which melts at a high temperature to create a 3D object instead of just an idea on paper. It can be used to draw in the air or on surface as well as tracing objects on paper. Use this pen to create any 3D objects you like. The only limitation of 3D drawing is your imagination.
3D pen for freehand drawing of 3D objects.
Lightweight and compact design.
Ergonomic design for optimum handling.
Low noise design and intelligence standby modes, extending the lifetime of the pen.
LCD screen shows filament, speed level and temperature.
Support ABS and PLA, speed and temperature adjustment.
Powered by 5V/2A, can conveniently connect to a power bank or laptop that with a USB output port or by the wall charger.
Good heat dissipation design, better to avoid overheating and causing skin injury.
Integrated and compact design, electric heating nozzle is convenient for maintenance and replacement.
It can be used to draw in the air or on surface as well as tracing objects on paper.
Suitable for painting workers, product designers, hobbyists, children, students, creative individual, etc.
Plug the adapter or USB cable.
Choose PLA/ABS filament(show in LCD screen) by pressing the wire unloading/material selection button.
Press the wire feed button, then the pen starts preheating. When blue light turn on, preheating has finished.
Put filament into the import hole, keep pressing the wire feed button, the filament will be sent into the hole by the inner motor.
When the filament out of nozzle, you can draw what you want.
Press the two speed button, you can freely change the filament's output speed.
Keep pressing the wire unloading button, the filament can automatically withdraw.
Press the two temperature control button to adjust the temperature.
When change the same filament of different colors, make sure to unload the filament totally and cut the filament ending neatly, so as to avoid mixing one color of filament with another one.
1. You will receive the filament is random, ABS or PLA, also in ramdom color.
2. When feed the filament into the filament hole or drop out from it, only keep pressing the feed button, do not push the filament as the pen will send the filament automatically. And
remember to cut the end of the filament neatly after unloading the filament from the hole.
3. The painting pen nib and the near area are high temperature area, the highest temperature can reach 245 degree, do not touch the nib with hands or touch others objects with the nib.
4. This device is suitable for children over 8 years old and adult use. Children should use it under the tutelage of adult.
Working voltage: DC 5V/2A
Nozzle diameter: 0.7mm
Pen color: Blue, yellow, black, red (optional)
Printing filament: 1.75mm ABS/PLA (only 1.75mm is compatible)
Discharging mode: hot melt extrusion molding
Molding mode: 3D modeling
Printing range: Unlimited
Spinning speed: Adjustable
Temperature: 60℃~245℃ adjustable
Adapter: US, EU, UK (optional)
USB cable length: 100cm / 3.28ft
Item length: 18.5cm / 7.28in
Item weight: 63g / 2.22oz
Package size: 22 * 14.4 * 5cm / 8.66 * 5.66 * 1.96in (L * W * H)
Package weight: 287g / 10.15oz
1 * 3D printing pen
1 * Power adapter
1 * USB cable
1 * Pack of filament (three colors)
1 * User manual (English and Chinese)