TEVOUP HYDRA 3D Printer Laser Engraver 2 in 1 Machine

Features:
2 in 1 laser engraving cutting and printing function, special module design structure, can easily switch laser head and print head.
Using lattice hot bed, printing adhesion is more stable, easy to take mold; AC high power fast heating hot bed, can reach 100 degrees Celsius in 1 minute, and the temperature is constant.
305x305x400mm larger build volume, able to print, cut and cave. And equip with direct extruder, free to print with soft filaments such as TPU, PLA, ABS, etc.
Adopts TMC2209 silent driver, the printing noise is as low as 50dBA, so there is no need to worry about affecting sleep even if you print at night. The motherboard uses MKS Robin Nano V3.0 which bring better performance.
Support auto-leveling function, more accurate measurement of the inclination of the hot bed plane, to achieve better printing results for beginners. And resume printing and filament run-out detection function. Faster speed, the max print speed is 150 mm/s. 

Specification:
Model: Hydra 2-in-1 3D Printer
Product Size: 56 x 60 x 62cm/22.05 x 23.62 x 24.41in
Product Weight: 16kg/35.27lb
Build volume: 305 x 305 x 400 mm/11.8 x 11.8x 15.75 in
Layer resolution: 0.1mm -0.3mm
Build speed: 30mm/s - 150mm/s
Travel speed: 250mm/s
Print surface: Removable -ceramic (magnetic PEI flex plate as upgrade)
Heat bed type: AC heat bed (SSR + 135C FUSE)
Number of extruders: 1
Filament diameter: 1.75mm
Supported materials: PLA, PLA FLEX, PLA WOOD, ABS, PETG, HIPS, ASA, PA, PC,  TPU
Special features: Modular X-Carriage, ABL, touchscreen, synced dual-z, direct drive, silent drivers
Advanced sensors: filament detection sensor, sensorless homing
Calibration: Auto bed leveling BILINEAR 25 points, 3.3
Print technology: FFF (Fused Filament Fabrication)
Feeder type: DIRECT DRIVE DUAL DRIVE extruder + V6 VOLCANO HOTEND
Max Z axis resolution: 0.05mm
Nozzle type: MK8 VOLCANO
Nozzle diameter: 0.4mm 
Nozzle temperature: 150℃ -240℃ (all metal throat - no bore 4.1mm + temp. sensor semitec 104GT)
Nozzle heat up time: <2 minutes
Build plate heat up time: 120℃ in less than 2 minutes
Operating sound: < 50dBA
Power: 110-240V 600W max (w/ heated bed turned on)
Control board: 32bit MKS sGen L V2.0 / TMC 2209 V2.0 UART MODE Marlin 2.0.7.2 / 4.2 Inch touchsceen
Upgradability: In-house made X-carriage modular system: LASER, CNC, DUAL EXTRUDER, open-source software.removable drivers, and more to come...
Engraving Size: 305x305mm
Machine Electricity Power: 2.5W/3OW
Diode Laser Power: 1.6W/5.5W
Laser Wave Length: 455±5nm
Engraving Accuracy: 0.01mm
Focusing Method: Fixed focus laser + sliding device
Power input: 100-240V AC, 50/60HZ
Power output: 24V 240W
Engraving Materials: Wood, paper, cardboard, plastic, white, PCB board, aluminum oxide, 304 Stainless steel, ceramic, dark stone
Package Size: 653 x 520 x 280mm/25.7 x 20.4 x 11in
Package Weight: 17kg/37.47lb

Packing List:
1 x 3D Printer Kit