WLtoys V977 Power Star X1 6CH 2.4G Brushless 3D Flybarless RC Helicopter (WLtoys Helicopter,V977 Power Star X1 Helicopter,Flybarless RC Helicopter)

The curves are set by the factory and, per the manual, there is not adjustment. There could be a way, but I am not aware of it. I would like more head speed, but I have adjusted to the Tx. The Tx has selectable 6g 3D modes as well as Low and High stick rates. 6g is extremely stable standard flight. In 6g it is almost a… see more The curves are set by the factory and, per the manual, there is not adjustment. There could be a way, but I am not aware of it. I would like more head speed, but I have adjusted to the Tx. The Tx has selectable 6g 3D modes as well as Low and High stick rates. 6g is extremely stable standard flight. In 6g it is almost as stable as my v911 pro and you can not do inverted flight. You can use this setting to learn. When you select 3D the heli become extremely responsive, behaving much like a 450 FBL heli. You can then flip the idle-up swt for 3D flight. see less

By 2021 on March 10, 2018

Main motor is indeed brushless; 11x08mm to be exact. But the tail is not brushless so I would order extras. Also order extra landing skids, main and tail blades and main gears. Order from andoer to save money and it only takes 5-7 days from China. I highly recommend this helicopter to learn with and after its very capa… see more Main motor is indeed brushless; 11x08mm to be exact. But the tail is not brushless so I would order extras. Also order extra landing skids, main and tail blades and main gears. Order from andoer to save money and it only takes 5-7 days from China. I highly recommend this helicopter to learn with and after its very capable. All the parts are very reasonable in terms of price as well. see less

By Ronnie Rennels on December 21, 2017

It's not at all that large... maybe 10in or so in length. It's a 100 class heli. I highly recommend this helicopter. If you buy it get an extra receiver on order from andoer on its way from China cuz it's 2 to 3 times as much to get it from the USA. Other than that this thing is as good as it gets for going from coaxia… see more It's not at all that large... maybe 10in or so in length. It's a 100 class heli. I highly recommend this helicopter. If you buy it get an extra receiver on order from andoer on its way from China cuz it's 2 to 3 times as much to get it from the USA. Other than that this thing is as good as it gets for going from coaxial copters to collective pitch flybarless copters. see less

By Ronnie Rennels on November 5, 2017

I don't know if this is your doubt, but if is about how to sincronize the transmitter and the heli, you turn on the heli first, and the transmitter after that. The sincronization will automatically happens.

By Raphael França on February 1, 2018

Make sure throttle is completely down and throttle trim is all the way down before attempting to bind.

By J. Williams on January 31, 2018

No it does not. It is a completely different protocol. It is the best way to learn to fly CP/flybarless, these things are great, like the V911.

By Barclayholmes on January 31, 2018

Yes, make sure only one 977 is turned on at a time. If you have both turned on both will bind and fly but you will surely crash one or both. You can't fly two helicopters at the same time.

By san1510 on January 28, 2018

In 3D mode on the buttons the red light will flash if not flashing push the 3d/6g button till it does. Bring your throttle/pitch stick to half throttle and pull the idle up switch twords you. The dual rate can be in hi or low but it's harder to get it to flip in low. The smaller the copter the more squirrely it is. If … see more In 3D mode on the buttons the red light will flash if not flashing push the 3d/6g button till it does. Bring your throttle/pitch stick to half throttle and pull the idle up switch twords you. The dual rate can be in hi or low but it's harder to get it to flip in low. The smaller the copter the more squirrely it is. If you get in trouble and are going to crash pull the throttle hold switch on the right side and that will cut power to the motor and let it fall. It will tear itself apart if it hits the ground under power. The swash plate and tail motor are the weak parts. They are cheap so get spares. I fly this heli, trex 250 and blade 450, this heli is the most handful but has been a great heli. Have fun and remember, it's not a matter of if you crash rather when and how bad.lol. we all crash just have fun. Merry Christmas. Chris see less

By mouse on December 25, 2017

46 grams without battery 58 grams with battery

By joejoe on December 19, 2017

It not bind to DX6i

By Wanida R. on December 10, 2017