Original HR SH5C 2.4G 4CH 6-Axis 2.0MP Camera Headless Mode UAV Drone 3D-flip RTF RC Quadcopter

The SH5C quadcopter is a fantastic quadcopter which you will love it at first sight. It's headless mode, 3D-roll ability and high low speed make your flight easy and joyful. The 2.0MP camera with real-time transmission can capture photos and record videos as you wish. A good choice for you!











Features:
2.0MP camera captures and records every beautiful and unforgettable moment.
With headless mode, no need to adjust the position of aircraft before flying.
Attractive 3D-flip function brings more fun.
6-axis gyro ensures more stable flying and be easy to control.
High/low speed modes for both beginners and experts.
One key automatic return ensures that you can call back your quadcopter without any delay.
Bright LED lights will bring better orientation.
2.4G technology adopted for anti-interference, more copters flying together can not interfere with each other.

Specifications:
Model: SH5C
Controller mode: mode 2
Color: white/black optional
Gyro: 6 axis
Control channel: 4 channel
Working frequency: 2.4G
Camera: 2.0MP
Flight time: about 5-8mins
Charging time: about 60mins
Control distance: about 120m
Function: 2.0MP camera/headless mode/3D-flip/one key return/high low speed
Battery for quadcopter: 3.7V 650mAh Li-po battery(included)
Battery for transmitter: 4 * 1.5V AA battery(not included)
Weight: 87.5g
Dimension: 315 * 315 * 115mm

Package Information:
Package size: 43 * 23 * 10.5cm / 16.9 * 9.0 * 4.1in
Package weight: 595g / 1.3lb
Gift box package

Caution for the battery:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.

Notice:
This RC model is not a toy and is not suitable for children under 8 years old, keep it away from children.
Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.

Package List:
1 * SH5C RC Quadcopter
1 * Transmitter(Mode 2)
1 * 3.7V 650mAh Li-po Battery
1 * Camera
2 * Spare Pair of Propeller
4 * Protective Guard
2 * Pair Landing Gear
1 * Card Reader
1 * 8GB SD Card
1 * USB Charger
1 * Screwdriver
1 * User Manual
1 * Accessories

FAQ of the aircraft:
1.The aircraft fail to connect with transmitter.
Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds.
2.One or more motors don't work.
Drone should stay on a flat surface during the binding, or motor is damaged.
3.Battery problems (can't be charged, swelling, etc)
Battery damaged, suggested to change a new one.
4.Accessories missing.
Check gift box package inside and outside carefully. Contact custom service.
5.The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propeller is installed in the right way.
6.During the charging, battery and charging cable melt.
This USB charger only used for DC current(computer USB port), never connect to AC electric circuit. Besides, pay attention to the charging time, never over charging.