SkyRC D100 v2 is a twin‐channel charger with two independent circuits which can charge 2 batteries of various chemistries (LiPo/ LiHV/ LiFe/ LiIon/ NiMH/ NiCd/ Pb) simultaneously. It is capable of operating as a power supply with a maximum output of 100 watts helps the hobbyists to power the DC equipment. With its unprecedented function of voice guide, even a green hand can use this charger without any hurdles. The mobile application of 11 languages comes with the useful "Scan to go" function.
Features:
* Compatible with Various Batteries: With 2 independent circuits, it is capable of charging 2 batteries of various chemistries (LiPo/ LiFe/ LiIon/ LiHV/ NiMH/ NiCd/ Pb) at the same time.
* Power Distribution: The charger supports power distribution between CHA/CHB and PSU Within the total power of 100W in AC mode.
* Voice Guide: A speaker loaded with English guidance has been installed which makes the charger more user-friendly and helps to reduce misoperation.
* LiHV Mode Available&DC Power Supply: The LiHV mode is able to charge the new generation of LiPo batteries with a maximum voltage of 4.35 V. Capable of supplying 100W DC power dramatically expands its usage scope. That is really convenient for drivers to power their DC devices, such as tire warmer, PIT light, etc.
* SCAN TO GO & APP Control: SkyRC D100 v2 features a unique function of SCAN TO GO. To fully experience that function, a QR code has to be created first inside the SkyCHARGER APP. Follow the below video to create the QR code. The BT 4.0 connectivity allows the user to remote control and monitors the D100V2 comfortably through an app on a portable device such as a smartphone.
* PC SOFTWARE: Charge Master 3 can start/stop the process, and view real-time graphs of current, voltage, capacity, and temperature, also monitor single-cell voltage.
Specification:
Brand: SKYRC
Model: D100 V2
Item name: AC/DC Dual Balance Charger Discharger
Size: 153*140*67mm
Weight: About 980g
AC Input Voltage: 100-240V
DC Input Voltage: 11-18V
Charge Wattage: AC 100W(Support Power Distribution); DC 100Wx2
Discharge Wattage: 10Wx2
Charge Current: (0.1A-10.0A) x2
Discharge Current: (0.1A-2.0A) x2
DC Power Supply Output: 13.8V / Max. 100W
Current Drian for Balancing Port: 300mA/cell
Trickle Charging Current: 50mA-300mA & OFF
LiPo/LiFe/Lilon/LiHV Battery Cell Count: 1-6S
NiMH/NiCd Battery Cell Count: 1-15S
Pb Battery Voltage: 2-20V
APP: Requires iOS 9.0 or above / Android 8.0 or above
Package Information:
Package size: 27x17.5x10cm
Package Weight: 1100g
Package List:
1 * D100 V2
1 * AC Power Cord
1 * XH Adaptor
1 * Charging Cable
1 * Banana connectors with XT60 connector Charging Cable
1 * Instruction Manual
