GEP-KX5 is wished to be designed as a rack which is quite elegant and graceful. This is the reason why it is named as "Elegant". GEP-KX5 can make you feel the good balance by its new and fresh design.
Features:
The one-in-all high accurate CNC arm is made of 3K pure carbon fiber plates, whose structure is simple but solid. The arm is quite narrow (14mm) so the wind resistance will be smaller.
The front part and rear part are supported by aluminum pieces, while the side board connects with the aluminum parts, making the structure solid and firm. Besides, such a structure can efficiently protect the electronic equipment inside the machine. The LED rear light board is fixed by a square aluminum post, where a buzzer for seeking the machine is available. Therefore, it is quite practical and good-looking.
By True X structure, it is suitable for competition and freestyle fly.
There are six 2812 rear lights and a bb sound. When flying, the lights are cool and the flight is easy to be found because of the buzzer.
The 2mm bottom board can well guarantee the flight control; also, it can protect the components from being damaged when collapsing and landing.
YFS screws (strength: grade 12.9) can ensure a good hardness.
One PDB distribution board with BEC (5/12v output) is available, integrating with XT60.
Specifications:
Item Name: GEP-KX5 Elegant
Weight: 115g
Wheelbase: 243mm
Props Size: 5inch
Size: 205*205mm
Arms board: 4mm
Base board: 2mm
Side board: 1.0mm
Recommended(Not Included):
Flight Controller: F3 /F4/Naze32/ CC3D
Motors: 2204/2205/2206/2305/2306
ESC: 20A-35A
Propeller: 5inch
Battery: 3S 1300mAh ~ 4S 1500mAh
Package Information:
Package size: 20 * 20 * 2.5cm / 7.9 * 7.9 * 1.0in
Package weight: 290g
General box package
Package List:
1 * Frame kit
2 * Aluminum part
1 * PDB with 5/12v Output
1 * XT60 Connector
1 * Battery Strap
1 * Tail LEDs Board
