GEPRC GEP-XT60-PDB PDB Power Distribution Board w/ XT60 Plug for RC FPV Racing Drone
Features:
Lightweight, exquisite workmanship and high-efficiency
Wide input voltage range 9~18V (3~4S LiPo) w/ TVS protection
FPV 3-4S power distribution board is specially for FPV drone quadcopter
The PDB made of high-quality material can provide the highest performance
Built-in 5V/12V BEC for RC Receivers, Flight controllers, OSD, Servos, Video TX, FPV camera
Specifications:
Input voltage range (3S-4S LiPo operation): 9 - 18V DC
Regulated 5V and 12V outputs
LED power indicators ( 5V & 12V outputs )
6 ESC outputs & 1 pair VCC/GND pads
Dimensions: 36 * 50 * 4 mm (without XT60)
Mounting: 30.5 * 30.5mm, Φ3mm
BEC 5V output:
Designed for RC Receivers, Flight controllers, OSD, and Servos
DC/DC synchronous buck regulator
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant (5 seconds/minute)
BEC 12V output:
Designed for Video TX or FPV camera with linear regulator
Recommended battery: 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant (2 seconds/minute) BEC 12V @ 3S LiPo
Output voltage: 3S Li-Po
Recommended Parts: (NOT INCLUDED)
ESC outputs:
Continuous current: 25A * 4 or 15A * 6
Peak current (10 seconds/minute): 30A * 4 or 20A * 6
Kindly reminder:
There could be a few deviations due to manual measurement. Thank you for your attention
Package information:
Package size: 10 * 5 * 1cm / 3.9 * 1.98 * 0.39in
Package weight: 11g / 0.39oz
Poly bag package
Package included:
1 * GEP-XT60-PDB
1 * XT60 Plug