Creality K1 Max FDM 3D Printer Buit-in AI LiDAR and AI Camera 300x300x300mm Large Build Volume 600mm/s Printing Speed

(I'm user iviar in thingiverse.com and waited a week of use while revising my review) I'm delighted, I received a well closed box apparently from the producer, the version with unicorn nozzle (said to be "quick" change nozzle), or at least the printer was provided with a spare part of unicorn type in the box) and the gear switch is the firmer one in steel, so apparently the most modern hardware revision (minor things were changed by Creality on the K1 Max shortly after product launch, I didn't say anything in the order notes and received the hoped version (likely there are not anymore around of the very initial products which received some frightening review in youtube)), the firmware was 1.3.2.20 which shown to work well and furthermore can be updated immediately (I'm not doing it before to know what it does change, as the one provided appears to works well). My initial test: I loaded K1 Max sold by tomtop with the same most failing filament spool I experienced with other printer (a CR-10): a PERG Transparent by Geeetech wich tends to get scratched by the pushing or pulling gear and clog a lot, a thing that doesn't happen with other filaments on the CR-10, but the K1 print incredibly well even with this filament, no a single failure yet and the flow rate was the hightest I experienced for this PETG. Before I went down in settings with the other printer to 2.3mm^3/s with such filament to reduce the failures, but with the K1 Max I left the default 9mm^3/s of Creality-Print linux app V4.3.8.6991 for PETG, and it worked splendidly also without connecting the printer to the internet, just to the LAN, not a single print failure, so I'm confident the other easier filaments will also be pulled well by this machine, PS: in fact even an old ABS I had around open for years, not a single print failure after a week of printing with the most complicated material (about 30 prints). I saw youtube reviews complaining on any sort from this machine, but I have to say that everything that I saw criticized works well, I printed a 50% scaled down 3dbenchy (1/8 its volume), and went out smooth with extreme precision. Note: Before start there was a black filament apparently obstructing the nozzle so my first load of new filament didn't enter easily as expected after reaching the grabbing point which was reached easier than some youtube reviews says, but it was not extruding by the menu, I removed it out of the way by pressing down with the provided "small metal stick with a ring" tool having set the hotend at 240 degree. I experience a very intuitive interface (E.g. in the big screen of the K1 Max pressing the heater is possible to set its temperature and so on).

1. 
2. 

Verry fast an good printer

I got my creality k1max , and tested it.It's great!!!For the hands-free auto-leveling design, I don't need to lift a finger or pay any attention, just turn it on and print.The 600mms printing speed it advertised made me surprised, it reduced my waiting time considerably.Together with the Creality Hyper PLA filament, the surface of the printed model is very subtle, I love it.

I saw it advertised that this machine supports 600mm/s max speed, I tested it and it is indeed amazing, it is more more more faster than the ender 3 s1 I have. However, I would recommend using it with the Hyper PLA filament, for more detailed models to be printed.I ran out of Hyper PLA filament and use it with a CR-PLA matte filament, which produced a rougher product.The Hands-free Auto Leveling design is newbie-friendly, you can start printing as soon as you receive it, no need to assemble, no need to level, just set the voltage and turn it on.

Unboxed ran initial checks and started printing. Excellent quality and great speed. Have run several of my on prints through creality slicer and printed with same great results.

I like k1 max. It has a large printing size. I will test it immediately after I get it. First of all, it is very easy to assemble. It is very friendly to novices. The printing speed is very fast, which is a speed I have never experienced before. She has 600mm/ s printing speed, and the printed things are also very fine, this is a very worthwhile purchase

I have been printing for years..... Creality has a real winner

Had my K1 Max for about 2 weeks now and I get prints done and to people far faster with pretty much the same quality. A few hiccups at the start and now I just start prints while I am out and about and come home to a finished print. For sure my favorite printer so far.

Got my k1 max two days ago and have already printed two helmets which is nuts for me coming from a ender max neo

This printer is amazing

I saw it advertised that this machine supports 600mm/s max speed, I tested it and it is indeed amazing, it is more more more faster than the ender 3 s1 I have. However, I would recommend using it with the Hyper PLA filament, for more detailed models to be printed.I ran out of Hyper PLA filament and use it with a CR-PLA matte filament, which produced a rougher product.The Hands-free Auto Leveling design is newbie-friendly, you can start printing as soon as you receive it, no need to assemble, no need to level, just set the voltage and turn it on.