This professional airbrush kit is designed for airbrush painting enthusiasts. Includes an air compressor with pressure gauge®ulator&filter, an airbrush with nozzle in 0.3mm diameter, an holder for 2 airbrushes, a 1.8m air hose and an instruction manual.
Features:
Powerful air pressure at 1/6 HP, delivers more air volume than any airbrush demands.
Great performance with gauge and water trap filter that provides precise adjustment of airflow and ensure clean, dry air.
Auto-start&auto-stop function, energy-saving and ensures for a longer service life.
Internal hot protection device, auto power-off when it is over heat, and reset after it cool down.
Supports 2 airbrushes work at same time, especially perfect for model painting, make up, tattoo, cake decorating, henna painting and so on.
With a metal handle, convenient to carry around.
Comes with a high quality dual-action gravity feed airbrush.
How to Spray:
1.Fill fluid in the cup after thinning appropriately.
2.Hold the airbrush lightly in your hand
3.By pressing the main lever, a stream of air emerges. Then draw it backward gradually for color atomization.
4.The spray pattern is in accordance with the distance between a work surface and a airbrush.
5.For fine line spray, remove the needle cover and hold the air brush near a work surface.
Operation of Regulator&Filter:
1.The gauge reflect the working pressure of the air tools.
2.Pull the pressure regulator up; turn clockwise to increase the pressure; turn counter-clockwise to release the pressure.
3.Turn the pressure regulator to get the right working pressure needed, and fix it. Do not turn the button when it can not be adjusted.
4.Push the button water release needle to release the water.
Specifications:
Airbrush
Color: Silver&Blue
Material: Stainless Steel
Control: Dual-action
Feed Type: Gravity
Fluid Cup Capacity: 7cc
Nozzle Diameter: 0.3mm
Weight: 90g/ 3.2oz (Approx.)
Length: 15cm/ 5.9in (Approx.)
Air Compressor
Type: Single Cylinder Piston Compressor
Power: 1/6 HP
Speed: 1450/1700 r.p.m
Air output per min./liter: 20~23L/min
Auto Stop: Start at 3BAR(43psi), stop at 4BAR(57psi).
Pressure Adjust Range: 0~4BAR
Suitable for airbrush with nozzle: 0.2~1.0mm
Item Size: 25.5 * 20 * 13.5cm/ 10 * 7.9 *5.3in
Item Weight: 3187g/ 7lb.
Package List:
1 * Air Compressor
1 * Airbrush
1 * Holder for 2 airbrushes
1 * Air Hose
1 * Eyedropper
1 * Nozzle Spanner
1 * Instruction Manual