Solar Wall Lamp Three Lighting Modes

This solar LED light is designed with built-in 18650 Li-ion battery. Widely used in sunny places( It also can be charged when the light is weak, but the generated current is relatively slow and can't meet LED working current consumption), such as fences, walls, gates, courtyards, buildings and so on. Charging during daytime, lighting at night.

Features:
Intelligent IC control system to ensure safety during charging discharging and transportation. Eliminate the danger of batteries damage and even explosion caused by over-loaded or over-discharged. 
The product is strictly in accordance with IP65 waterproof design structure, safe and practical.
Material : using ABS engineering plastics with sustainable structure and good weather resistance, applicable to outdoor.
Human body sensing model GS-SL1804 design with PIR sensor. There are 3 lighting modes, suitable for night lighting.
1. Lightly press the switch into the the first sensing mode ( recommended mode ) . The lamp will auto lighting when people motion detected , and when people walks away over 15 seconds , it will tum to standby state.
2. Then press again , lamp will turn to sensing + dim mode , full bright when motiondetected , auto turn to dim light ( 20 % brightness ) after 15s . Dim light will keep lighting until next motion detected.
3. Press switch 3rd times , lamp will switch to continuous ighting ( 80 % brightness ) mode. This mode will consume the power sharply , lamp will work less hours.
4. Press the switch 4th times , the lamp will be off .

Specifications:
Color:Black/Gray/Blue/Orange （optional）
Battery: Li-ion Battery, 3.7V, 1200mah
LED Light Source: O-SRAM 2835 3V 0.5W 15PCS 
Color Temperature: 3000/4000/6000K
CRI: 80
Liminous Flux: >200LM 
Charge Time: 5-8.5h
Lighting Time: >800 times/15s （Mode 1 ）
Protective Function: Overcharge/over
discharge/short circuit protective
Opetaiting Temperatures: -20-60°C
IR Rating: IP65
Package Weight: 160g/5.6oz
Package Size: 163*55*46mm/6.4*2.2*1.8in

Packing List:
1*Lamp
1*Manual
1*Switch Pin
2*Mounting Screws
2*Expansion Plug
2*Adhesive Tape