The multifunctional car jump starter with remaining power LED display screen is a convenient and powerful device that combines 3 different functions: mobile power supply for digital devices, car jump starter and torch. It can charge for mobile phone, tablet, camera, MP3, MP4 and guarantee emergency start for auto. It is a perfect helper in travel.
Apply to Gasoline-powered car whose displacement is under 5.0 and diesel-powered car whose displacement is under 3.5.
Supporting 12V vehicles emergency start.
3 USB ports of different current to charge for cell phone, MP3 / MP4 / MP5, camera, tablet.
LED displays remaining power for timely supervision of electricity consumption.
With torch function for illumination and SOS.
Short circuit protection function, using more safely.
High rate polymer cells to support fast charging and low self-discharge.
More than 1000 times charging and discharging cycles.
Super slim size, unique design and elegant appearance.
Battery capacity: 12800mA
Charging time: 3-4 hours
Output voltage of auto starter ports: 12V
USB ports: 1 * 5V 1A, 2 * 5V 2.1A
Input charging port: 15V / 1A
Starter current: 200A
Peak current: 400A
Cycle life: 1000 times
Applicable temperature range: -20℃-60℃
Color: Black and red
Starter size: 16.0 * 7.5 * 2.5cm / 6.3 * 3.0 * 1.0in (L * W * H)
Starter weight: 417.0g / 14.7oz
Size of tool case: 28.0 * 23.0 * 5.0cm / 11.2 * 8.7 * 2.0in (L * W * H)
Total weight: 1059.0g / 2.3lb
To start auto:
1. To start auto, please confirm at first that the electricity is not less than 20%.
2. Red clamp connects "+" (positive polarity) of the storage battery and black clamp connects "-" (negative polarity).
3. The plug connect the jump starter.
4. Start the vehicle.
5. Remove the plug from the jump starter.
6. Remove the clamps from the battery.
To charge digital devices: Connect digital devices with the starter power supply, turn the master switch ON and press the power button.
Display the remaining power:
Turn ON the master switch and press the power button.
Illumination and SOS:
Turn ON the master switch. To get into illumination mode, press the main button for 3 seconds. To get into SOS mode, press the main button again. After press one more times, the light will flash quickly.
Someone may connect positive and negative polarities of storage battery and cause short circuit. The starter power supply has protection circuit. If there is short circuit, the fuse will blow out immediately to prevent any unnecessary personal injury and property damage. You can send the starter power supply to repair.
1. It is suggested to maintain some battery capacity and the product shall be charged at least at every three months.
2. During charging process, mild heat of equipment is normal phenomenon.
3. It is suggested to use the product under room temperature environment away from moisture, high temperature, ignition source and erosive materials.
4. Do not use chemicals such as soap or detergent for cleaning.
5. Do not drop the product when using.
1 * Car jump starter
1 * Car charging cable
1 * Power adapter (US standard)
1 * Jump starter booster cable
1 * User manual (English)
1 * Tool case