Two XLR & 6.35mm TRS inputs for balance & unbalanced mic, instrument and equipment with stereo outputs.
Four 6.35mm TS unbalanced outputs.
One MIDI input and output.
One 6.35mm phone jack for headphones.
HI-Z switch for "input1" to connect high impedance instruments.
Signal level indicators for "input1" & "input2".
"Trim1" & "Trim2" to adjust the input signal level.
"Mono" button allows "input1" & "input2" to be used as mono channel or a stereo pair.
"A/B" monitor button to select the signal source sent to the "level" knob:
In "A" position, input "input1" & "input2" are sent to the main out;
In "B" position, input "input3" & "input4" are sent to the main out.
"Level" knob: Adjust the signal level sent to the main out jacks.
"Mix" control: Adjust the audio mix received from "Daw" and "Input" signal.
Phantom power switch: sending 48V power to the front-panel XLR input for using with condenser mic.
Support recording and playback at up to 24bit/192kHz.
Support for Windows, for Mac system computers.
Material: Aluminium alloy
Power adapter: EU input: 100-240V 50/60Hz 500mA
output: 12V 1A
Item size: 15 * 11 * 4cm / 5.9 * 4.3 * 1.6in
Item weight: 528g / 18.6oz
Package size: 22.5 * 16.5 * 7cm / 8.9 * 6.5 * 2.8in
Package weight: 816g / 28.8oz
1 * Audio Interface
1 * USB
1 * Power Adapter
1 * User Manual(English & Chinese)
Download recently UC-2 driver from website "www.nuxefx.com" , install the driver, and then the item can work through your computer.