Feature:
Reliable, water-resistant and long lifespan.
Light and thin, easy to use and carry.
Build-in industrial micro controller.
Fully 4-stage PWM charge management.
One-key setting, digital display, auto memory function.
High conversion rate, high efficiency output, excellenting weak light effect.
Overcharge protection, reverse protection, DIY your backpack and teaching use.
Reverse current protections, low heat productions.
Little noise, high efficancy and low malfunction and suitable for outdoor activities like camping, fishing, hiking, etc.
Application: car, boat, caravans, camping, fishing, hiking, etc.
System Connection:
1. Connect the batterys to the charge regulator - plus and minus.it will show 1 ,if it detects 12V batterys, 2 if it detects 24V batterys.
2. Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
Specification:
Material: PET & ABS
Output voltage: 12V/24V automatically distinguish
USB output: 5V/3A
Panel voltage: 18V
Bulb voltage:: DC12V
Panel wattage: 20W
Bulb vattage: 3W
Working current: 10A
Buck charge: 28.8V
Float charge: 27.4V
Self-consume: <10mA
Discharge stop: 21.4V
Max solar input: <50V
Rated working current: ≤20A
Discharge reconnect: 25.2V
Working temperature: -35℃ to 60℃
Application: camping / hiking
Panel size: 415 * 370mm / 16.34 * 14.57in
Controller size: 134 * 70mm / 5.28 * 2.76in
Bulb size: 110 * 50mm / 4.33 * 1.97in
Package weight: 1138g / 2.51lb
Package size: 380 * 420 * 50mm / 14.96 * 16.54 * 1.97in
Notes:
1.Make sure your batterys has enough voltage for the controller to recognize the batterys type before first installation.
2.The batterys cable should be as short as possible to minimize loss.
3.The regulator is only suitable for leading acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries).
4.The charge regulator is only suitable for regulating solar modules. Never connect another charge source to the charge regulator.
Package:
1 * 20W Solar Panel
1 * 10A Controller
2 * 3W Light Bulb