7000mw Desktop Laser Engraver Portable Engraving Carving Machine Mini Carver DIY Laser Logo Mark Printer for Metal Engraving and Deep Wood Engraving and Cutting
7000mw Desktop Laser Engraver Portable Engraving Carving Machine Mini Carver DIY Laser Logo Mark Printer for Metal Engraving and Deep Wood Engraving and Cutting
7000mw Desktop Laser Engraver Portable Engraving Carving Machine Mini Carver DIY Laser Logo Mark Printer for Metal Engraving and Deep Wood Engraving and Cutting
It is not a DIY kit. After strict quality inspection, the whole machine was tested and assembled at the factory, you just need to assemble the X-axis and Y-axis together, very easy to get started.
Support "neje scanner" app, intelligent collection and creation, photo scanning, intelligent algorithm automatic connection printing. Taking a .JPG or .PNG photo from camera or album, and send the photo to the windows and MAC software directly.
The machine in-built with a gyroscope protection device. When the machine is running, the built-in gyroscope will record the working position at the beginning. If there is an accidental touch or the machine is displaced, the machine will automatically stop working to prevent accidents.
Professional file processing algorithm, the software can restore your design 1:1 lossless to each pixel. A variety of image algorithms better present the image characteristics of your family or idol.
Getting the driver and software installed was real easy. Download and install directly from the link, the software will be automatically connected after opening the software.
Provide professionals with the ability to directly parse the works designed by Inkscape and CAD software, directly execute .nc files and .dxf files, and execute them accurately. You can do the complex edits in PS / Inkscape / CAD or similar and just burn with the included program.
At the same time, it supports NEJE control software and GRBL software, which can not only enjoy the simple portability of NEJE software, but also support the operation fun of GRBL open source software; it supports the dynamic control laser module developed by Neje, which can support PWM power regulation, low light brightness regulation, laser temperature induction protection.
Full-featured that directly execute .BMP, .JPG, .PNG files and "NEJE CLOUD" provides thousands of engraving materials and resources to download and keep updating.
Standard 450nm 7000mW laser tube. The master 7W specializes in metal engraving and deep wood engraving and cutting.
Compatible with a variety of power lasers, while supporting 4pin 405nm 3500mw, 4pin 450nm 7000mw and 4pin 450nm 20W.
The laser focus is easy to adjust with your hands, and the focusing head is fixed with a rubber gasket.
Limit switch design, the machine can automatically reset.
Dual MCU: One MCU for Support NEJE Controller(Windows & MAC), The Other for GRBL Controller.
You can check your work after a pause, and starts back up where it left off.
1.It supports metal engraving including alumina oxide, copper and other non-reflective materials, depth of engraving (0.5-3mm wood), thickness of cutting(2mm),
3.It is not possible to directly engrave the metal with strong mirror reflectivity, which may cause injury to the operator or burn the laser.
4.When the machine is working, it is recommended not to look directly at the laser head, and not to operate the laser head directly by hand.
5.Laser diode is a sensitive component, pay attention to prevent electrostatic damage (product includes electrostatic protection design, but there is a certain probability of damage).
Questions & Answers
QHello, it's possible to engrave the back of a watch in stainless stell ?
By samJanuary 10, 2020
A1.It supports metal engraving including alumina oxide, copper and other non-reflective materials, depth of engraving (0.5-3mm wood), thickness of cutting(2mm),
2.Supported engraving materials: Wood, gray paper, leather, bamboo, blackening plastics, rubber, alumina oxide, copper, etc.
3.It is not possible to directly engrave the metal with strong mirror reflectivity, which may cause injury to the operator or burn the laser.
Reply By Customer Service CenterJanuary 11, 2020
QHi, Can this laser "engrave then cut leather" from the same file?
By Rick LeungNovember 7, 2019
AYes ,it supports engrave then cut leather for the same file ,have a nice day .
Reply By Customer Service CenterNovember 8, 2019
QDoes it comes with software that works on a Mac natively? What file format can it use? Thanks
By Rick LeungNovember 6, 2019
ASupported OS: WinXP / Win7 / Win8 / XP / Win10 ,Mac OS, android APP(neje scanner) .
Direct execution of .nc files and .dxf files and the ability to execute them accurately. You can do complex editing in PS / Inkscape / CAD or similar software and then burn it using the included program.
Reply By Customer Service CenterNovember 7, 2019
Qhow long the leg?its the leg adjustable? do you have retail in Malaysia?
By EricOctober 21, 2019
AIt is about 150cm and unadjustable .
We do not have retail in Malaysia ,have a nice day .
Reply By Customer Service CenterOctober 22, 2019
Qhi there, is this easy to run on windows 7 and can i use images i create in photoshop for my artwork? how long to ship to the UK?
By chris dixonAugust 27, 2019
AYes ,it supports Win7 .
Usually,If you choose the standard shipping,it will take 7-25 business days.
If you choose the Expedited Shipping*(DHL),it will take 4-10 business days, but DHL may have tax, thanks.
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contacts
TOMTOP use cookies to give you the best shopping experience. If you continue to use our services or create a new account, we will assume that you agree to our Privacy Policy.