This is a 120W 60V 10A constant current electronic load board. With OLED screen, which can display information comprehensively. And with temperature display, supporting the discharge and voltage setting. It supports load maximum power 120W, maximum voltage 60V and maximum current 10A. The CPU fan is with stable performance and provides good heat dissipation. It can be used to test all kinds of power load or burn-in, also can be used to test capacity of battery discharge. It is a best choice for DIY users.
Features:
120W 60V 10A constant current electronic load.
With OLED screen, displaying information comprehensively, clear and convenient for readings.
Built-in 9cm low noise CPU fan for better dissipation.
With temperature display, supporting the discharge and voltage setting.
Can be used to test all kinds of power load or burn-in, also can be used to test capacity of battery discharge.
Supports load maximum power 120W, maximum voltage 60V and maximum current 10A.
Using method:
1. Setting
Press the rotate button, the main interface and the setting interface will be switched.
In the setting interface, adjust the rotary button, changing the corresponding parameters in the setting interface. The clockwise adjustment is to increase the value. The counterclockwise adjustment is to reduce the value. The data will be saved automatically after the setting is finished. Set the value unchanged after power restart.
2. Discharge
Back to the main interface, press the "start / stop" button. The system will be based on the set data(Within the range of the stopping voltage)Discharge in a constant current mode! At this point, the system starts to work, and the parameters change.
3.Pause Discharge And Stop Discharge
During the constant current discharge period, press the "start / stop" key and the system will pause the discharge so long as you don't pull the battery out. Capacity and discharge time are not cleared. The system discharges when the "start / stop" button is pressed, capacity and discharge time will continue to count before the superposition. But if you pull out the battery or replace the battery during the pause, capacity and discharge time will be automatically cleared.
Storage:
This product provides 10 sets of data storage space. The data after power failure will not be lost. Each set of data stored has 4 parameters: discharge current, the voltage when the discharge is stopped, discharge capacity, discharge time.
1. Extracting stored sets data
Rotate the button at the main interface. Rotating button, you can enter the selective extraction data interfaces. Rotate the button to select the number of units to extract. Press the rotating button, the stored data is displayed on the screen, press the start / stop key to return to the main interface.
2. Storage data
This product only stores the parameters of the discharge as follows: When the discharge interface is completed, press the rotate button, access to storage data interface, rotate button to select group number, press the button again, stores and returns to the main interface.
3. Check discharge results
If not save the case, you want to look at the results of a discharge completed. You can rotate the button at the main interface, choose "nowaday", press the rotate button and get the result of the last discharge. If you want to store this group of data, press the rotate button to select the storage location, press the rotate button to confirm it.
Considerations: The data in "nowaday" will not be stored out of power. If you need to store, you can save the data to "store".
Specifications:
Supply voltage: DC12V(±5%)
Current regulation range of constant current discharge: 0-10A
Discharge voltage range: 3.3V-60V, accuracy: 0.01V
Maximum capacity range: 99999mAH
Maximum power: 120W
Item size: approx. 140 * 100 * 65mm / 5.51 * 3.93 * 2.55in
Item weight: 316g / 11.15oz
Package size: 25.5 * 18 * 7.5cm / 10.04 * 7.09 * 2.95in
Package weight: 325g / 11.46oz
Packabe List:
1 * Constant Current Electronic Load