The impedance tester uses a high-performance processor and an ultra-low power design. It is a portable product mainly used to measure the performance of the three basic components (resistance R, capacitance C, and inductance L). Built-in large-capacity lithium battery, the product is small in size, light in weight, easy to carry, and is more convenient for special operations such as outdoor and high altitude. The product display interface and buttons are clear and simple, and can be seen at a glance. Chinese and English can be set by themselves, which is convenient to use and simple to operate.
The test frequency range is wide, the frequency range: 50Hz~300KHz. The frequency point can be set.
Small size, light weight, easy to carry.
Built-in battery, using 2000mAh polymer lithium battery, continuous working time exceeds 4 hours.
The resolution is high, and the measurement result is 6 significant digits.
Comes with calibration function, accurate measurement.
Serial and parallel mode, level and internal resistance are optional.
Strong resistance to power frequency interference, prompting the degree of interference.
Automatic gear shift without manual intervention.
Main material: metal
Working frequency: 50Hz~300KHz
Step: 50Hz (10Hz)~10KHz
Display: 2.4 inch TFT resolution 320*240 (QVGA)
Battery: 1 * lithium battery, 2000mAh (included)
Power consumption: <1W
Charging current: 400mA
Charging interface: USB (only as a charging interface)
Automatic shut-down: always open, close immediately, 5 minutes to 60 minutes (optional)
Measurement parameters: Rs/Xs/Rp/Xp/Cs/Cp/Ls/Lp/Z/D/Q/θ/Vrms/Irms
DC bias: no
Display resolution: 6 significant digits
Measurement speed: fast, medium, slow
Measurement accuracy: less than 0.1% within the measurement range, out of range may be greater than 0.1%
Z, R, X: 0.00001mΩ~9999999MΩ
D, Q: 0.001~99999
mVrms: 1, 002, 003, 004, 005, 000, 000, 000, 000, 000, 000
Output impedance: 30Ω, 100Ω (optional)
Mode: automatic, series, parallel (optional)
DUT: automatic, resistance, inductance, capacitance, electrolysis (optional)
Calibration function: open circuit, short circuit (with factory value), load calibration
Operating temperature: 5℃~40℃
Atmospheric pressure: 860hPa~1060hPa
Item size: 130 * 108 * 31mm / 5.1 * 4.3 * 1.2in
Item weight: 309g / 10.9ounce
Package size: 185 * 130 * 115mm / 7.3 * 5.1 * 4.5in
Package weight: 477g / 1.1lb
1 * LCR Meter
1 * USB Cable