MPPT solar charge controller could detect the generation power of the solar panel in real time and track the highest voltage and current value (VI), allowing the system to charge the battery with maximum power output. It is used in the solar off-grid photovoltaic system to coordinate the work of solar panels, batteries and loads. It is the core control component of off-grid photovoltaic systems.
Features:
Advanced dual-wave peak or multi-wave peak tracking technology, when the panel is covered by shadows or part of the panel is damaged, multiple wave peaks will appear on the I-V curve, and the controller can still accurately track the maximum power point.
The built-in maximum power tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, which is about 15%-20% higher than traditional PWM charging efficiency.
The combination of multiple tracking algorithms can accurately track the best working point of the I-V curve in a very short time.
MPPT tracking efficiency up to 99.9%.
Using advanced digital power technology, the circuit energy conversion efficiency is up to 98%.
Support charging program of various types of batteries including gel battery, sealed battery, open battery and lithium battery.
With current-limiting charging mode, when the battery board power is too large and the charging current is greater than the rated current, the controller automatically reduces the charging power to make it work at the rated charging current.
Support instantaneous high-current startup of capacitive loads.
Support battery voltage automatic identification.
With fault LED indication and LCD display abnormal information, it is convenient for users to determine system failure.
Support historical data storage for up to 1 year.
With LCD screen display function, you can view equipment operating data and status, and support the change of controller parameters.
Support standard modebus protocol to meet the communication needs of different occasions.
Built-in over-temperature protection mechanism, when the temperature exceeds the set value of the device, the charging current decreases linearly with the temperature, thereby reducing the temperature rise of the controller and avoiding the controller's high temperature damage.
With temperature compensation function, automatically adjust the charge and discharge parameters to improve battery life.
With TVS lightning protection.
Specifications:
Material: ABS
Main color: black+white
Type: ML2420, ML2430, ML2440 (optional)
System voltage: 12V/24V Auto
No-load power consumption: 0.7W~1.2W
Battery voltage: 9V~35V
Maximum input voltage of solar: 100V (25℃), 90V (-25℃)
MPP voltage range: battery voltage+2V~75V
Rated charging current:
ML2420: 20A
ML2430: 30A
ML2440: 40A
Rated load current: 20A
Maximum capacitive load capacity: 10000uF
Maximum input power of photovoltaic system:
ML2420: 260W/12V 520W/24V
ML2430: 400W/12V 800W/24V
ML2440: 550W/12V 1100W/24V
Conversion efficiency: ≤98%
MPPT tracking efficiency: ＞99%
Temperature compensation coefficient: -3mv/℃/2V (default)
Operating temperature: -35℃~+45℃
Protection grade: IP32
Communication mode: RS232
Altitude: ≤3000m
Item size:
ML2420: 210 * 151 * 59.5mm / 8.3 * 5.9 * 2.3in
ML2430: 238 * 173 * 72.5mm / 9.4 * 6.8 * 2.9in
ML2440: 238 * 173 * 72.5mm / 9.4 * 6.8 * 2.9in
Mounting size:
ML2420: 154 * 131mm / 6.1 * 5.2in
ML2430: 180 * 147mm / 7.1 * 5.8in
ML2440: 180 * 147mm / 7.1 * 5.8in
Mounting hole size: φ3mm
Recommended cable size:
ML2420: Max. 8AWG
ML2430: Max. 8AWG
ML2440: Max. 8AWG
Package size:
ML2420: 275 * 200 * 110mm / 10.8 * 7.9 * 4.3in
ML2430: 300 * 230 * 135mm / 11.8 * 9.1 * 5.3in
ML2440: 229 * 225 * 135mm / 9.0 * 8.9 * 5.3in
Package weight:
ML2420: 1520g / 3.4lb
ML2430: 2284g / 5.0lb
ML2440: 2301g / 5.1lb
Packing List:
1 * Controller
1 * Cable
1 * User Manual
