Arbitrary waveform DDS signal generator from MHS-5200A series is a multi-functional signal generator with high accuracy and high performance. It adopts large scale of FPGA integrated circuits, high-speed MCU microprocessor and SMT in the inner circuit, which can greatly improve the anti-interference and lifetime of the instrument. The LCD display is divided into two lines: the top line shows the current frequency and the following line displays additional parameters or functions. This instrument is of great advantage in generating signal, scanning waveform, measuring parameters, etc. It's a perfect testing or measuring instrument for electronics engineer, electronic laboratory, teaching and researching.
Features:
Using DDS direct digital synthesis technology to generate accurate, stable, low distortion output signal.
CH1 and CH2 completely symmetrical two channels, each channel can be independently set the parameters.
Supports user-defined waveform, each arbitrary waveform memory depth is 2048*12bits, 200MSa/s sampling rate.
Can output arbitrary waveforms and conventional function waveforms(sine/triangle/square/sawtooth wave and TTL signal).
All functions are digitally controlled, accuracy and stable.
Dual-channel output, can work in sync, phase difference is adjustable.
With linear sweep (Max. up to 999s) and logarithmic frequency sweep functions.
Signal of both channels has built-in sophisticated -20dB attenuator in order to reach the minimum amplitude resolution 1mV.
With 120% ~ + 120% DC bias function.
4 TTL output(phase difference is adjustable).
Has a frequency measurement, period measurement, positive and negative pulse width measurement, duty cycle measurements and counting function.
With USB interface, after the connection with PC, the PC can be used to control the instrument.
Specifications:
Material: ABS
Color: white
Key features:
Frequency range:
Sine wave: normal modes (optional): 0.01Hz~6MHz / 0.01Hz~12MHz / 0.01Hz~20MHz / 0.01Hz~25MHz
Square wave: 0.01Hz~6MHz
Triangle wave: 0.01Hz~6MHz
Sawtooth wave: 0.01Hz~6MHz
Arbitrary waveform: 0.01Hz~6MHz
TTL digital signal wave: 0.01Hz~6MHz
Output modulation: frequency sweep
Waveform types: sine/triangle/square/lifting sawtooth wave, CMOS digital signal wave and arbitrary waveform
Waveform length: 2048Points
Sampling rate: 200MSa/s
Waveform amplitude resolution: 12 Bits
The Min. frequency resolution: 10mHz
Frequency error: +/-5*10^(-6)
Frequency stability: +/-1*10^(-6)
Amplitude range (peak to peak): 5mVp-p~20Vp-p
Output impedance: 50Ω(+/-10%)
Amplitude resolution: 1mVp-p (-20dB attenuation), 10mVp-p (no attenuation)
Offset range: -120%~120% (the ratio of bias voltage and signal amplitude)
Bias resolution: 1%
Phase range: 0~359°
Phase resolution: 1°
Sine wave:
Harmonic arrived system: 40dBc(<1MHz); 35dBc(1MHz~20MHz)
Distortion: <0.8%(20Hz~20KHz)
Square wave:
Lifting along time: ≤20ns
Overshoot: ≤10%
Duty cycle adjustment range: 0%~99.9%
TTL:
Lifting along time: ≤20ns
Low level: <0.3V
High level: 1V~7.5V
Arbitrary waveform:
Quantity: 16
Memory depth/group: 1KB/16
Scan:
Scan mode: linear sweep, log sweep
Scan time: 1s-999s
Scan range: it is determined by the sweep parameter settings
External measurements:
Frequency measuring range:
GATE-TIME=10S 0.1Hz - 60MHz
GATE-TIME=1S 1Hz - 60MHz
GATE-TIME=0.1S 10Hz - 60MHz
GATE-TIME=0.01S 100Hz - 60MHz
Input voltage range: 0.5Vp-p~20Vp-p
Counting range: 0~4294967295
Counting: manually
Positive and negative pulse width measurement: 10ns resolution, the Max. measurable 10s
Periodic measurement: 20ns resolution, the Max. measurable 20s
Duty cycle measurement: 0.1% resolution, measuring range from 0.1%~99.9%
Source selection: 1. Ext. IN Input (AC signal) ; 2. TTL-IN Input (digital signal)
Memory:
Quantity: 10
Location: M0~M9
Interface:
Interface mode: using USB to serial interface
Communication rate: 57600bps
Protocol: using the command line, the agreement public
Power supply: DC 5V
Item size: 195 * 175 * 70mm / 7.7 * 6.9 * 2.8in
Item weight: 542g / 1.2lb
Package size: 240 * 210 * 95mm / 9.4 * 8.3 * 3.7in
Package weight: 986g / 2.2lb
Packing List:
1 * Signal Source Generator
1 * USB Cable
1 * Compact Disc
1 * TTL Expansion Board
2 * BNC Clips Cable
