This smart socket can be remote controlled by phone with profesional APP. You can power on / off the socket as the time table you set as long as there is 3G / 4G or WiFi network. With it, you don't have to worry about pets when you are on a trip or worry about the open windows in rainy days. With it, you can control the household electrical equipments at anytime and any where. You can turn on the cooker when you are on the way home and the dinner might be ready when you arrive home. The GSM power socket is certainly a good life helper and a good gift for your friends.
Use phone to control the smart socket through 3G / 4G or WiFi wireless network, enjoy long distance remote control.
Time switch, turn on / off domestic appliances as the time table as you set.
Can work as a WiFi repeater to enlarge WiFi coverage.
Charging protection function enhance security.
Input voltage: AC 90-265V 50 / 60Hz
Maximum current: 10A
Maximum power: 2200W
WiFi standard：802.11b / g / n
Connector sheet: Phosphor copper and high polished nickel
Material: VO retardant PC
Item size: 7.2 * 5.0 * 7.2cm / 2.8 * 2.0 * 2.8in
Item weight: 79.0g / 2.8oz
Package size: 7.5 * 7.5 * 6.0cm / 3.0 * 3.0 * 2.4in
Package weight: 147.0g/ 5.2oz
Indicator light instruction:
Red light: Power on / off.
Flash slowly: Waiting for configuration.
Flash quickly: Being configuring.
Off: Remote mode.
On: Direct connecting mode.
1. Install the software.
For iOS: Scan the QR code on the package and install the APP "Kan Kun".
For Android: Scan the QR code on the package or enter the URL "//kk.huafeng.com:8081/android/Smartwifi.apk" to download the APP "Kan Kun".
2. Blue indicator light flash slowly.
Plug the smart socket into power supply, wait for 20 seconds (blue indicator light is always on) till the light start to flash slowly. If the blue indicator light does not flash slowly or user want to reset, please press the reset button on the lower right corner of the socket for 4 seconds and wait for 20 seconds.
3. WiFi setting.
For iOS device, please connect to OK_SP3 in WiFi signal list. Enter "set up" interface, select WiFi available signal on WiFi window, tape the password and click "Start to configure".
4. When the blue indicator finally turn off after slow flash and fast flash, the configuration is successfully down.
5. Please ensure the connected WiFi is the one pre-configured. Enter "device" interface, refresh the devices list and change the name of the device. After that, you can control the socket.
It would lead to short circuit and fire when the current is more than 10A and the power is more than 2200W.
1 * Smart socket