with 8 filter Layers 99.97% Filtration Rate For All Atomstack Laser Engraver Compatible with Ortur NEJE Xtool Sculpfun Engraving and Cutting Machine Low Noise Long Service Life
Features:
1. Designed for laser cutting: Atomstack Maker D2 air purifier, a 8-layer filter element specially developed for laser cutting, can effectively filter the odor and harmful substances generated by laser cutting, with a filtration rate of 99.97% (atomstack laboratory test data).
2. Contribute to environmental protection: Discharging the cutting waste gas directly into the atmosphere will cause more pollution, so use an air purifier to make the air fresh.
3. Healthy creation: use the atomstack maker air purifier, and say goodbye to all polluting gases: PM2.5/PM10/formaldehyde/TVOC, etc. Health is priceless, for the health of you and your family, please do a good job of safety protection.
4. Break through the limitations of the working environment: no longer need to worry about the laser cutting workplace, use the protective cover and air purifier of atomstack maker, no need to worry about smoke exhaust and air pollution, you can work safely in your garage, basement, or workshop.
5. Long life: a single filter element can be used for about 3 hours a day in normal laser cutting wood board, and can work continuously for 3 months, and the single continuous working time can reach 200H, giving you long-term efficient protection.
6. Easy to replace: just 3 steps, no need to disassemble the circuit, and quickly replace the filter element in five minutes;
7. High adaptability: the atomstack maker purifier can be adapted to all protective box products of Atomstack, Ortur, NEJE, xtool and other brands.
Multi-layer Material: The Protective Box is composed of 3 layers including 900D oxford cloth, honeycomb and flame retardant cloth (with silicone coating), lightweight, high density and fireproof.
Extended Smoke Pipe: The smoke exhaust pipe can shrink to 50cm at the shortest and stretch to 2m at the longest. It's convenient to pull the pipe to the open space for smoke exhaust.
Large Space: FB2 protective box area up to 760x730x400mm/29.9x28.7x15.7in, large enough to compatible with 99% semiconductor laser engravers in the market.
Smooth Air Inlet And Outlet Design: With enlarge air inlet, which greatly improve the efficiency of air circulation in the box and avoid low pressure effects.
Open to Use: The box is foldable and easy to store, and portable to carry to the school, office, studio, etc. Any problem, please contact our store without hesitation. Honor to serve you.
Specification:
Model: D2
Brand: Atomstack Maker
Size: 9.5x10.6x15.9"/240x269x404mm
Power supply: 5V 1A
Noise Level: 450≤dB
Air Flow: 255m³/h
Voltage: 100-240V
Note: Must be used together with a protective cover, compatible with all protective covers on the market。
Packing List:
1 x Air Purifier
1 x protective box
1 x Exhaust hose
1 x Metal mesh cover
1 x Exhaust fan
1 x DC12V power supply
4 x M4*50 screws&Nut combination
1 x throat Hoop
1 x Flange Fan
1 x H3 Allen Key
1 x Flat-blade Screwdriver
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contacts
We uses cookies to ensure you get the best experience on our website. Automatically agree after a 5-second countdown. By clicking "accept" you accept the use of all cookies as deacribed in our Privacy Policy.
