With this top quality guitar wireless transmitter receiver system, you can walk anywhere without a long cable and have fun with audience.
Features:
This is a guitar wireless transmitter receiver system, for walking freely when performing.
The longest distance in open reaches about 60m / 200ft, and the ideal distance in open is about 40m / 130ft.
Using UHF 600-870 MHz band and the latest high frequency filter of the RF to avert frequency interference.
PLL system, preset 16 non-interfered channels.
Automatic frequency scan feature searches for available frequencies.
Special design commanding circuit, strongly improve S/N ratio.
Using surface amount technology for PCB, more stable function.
Twice mixer high frequency circuit design, very strong sensitivity.
The receiver can powered by DC 9V or 3V AA batteries.
One plastic foam-padded box for protecting and carrying convenience.
Specifications:
1. Receiver:
Frequency range: 600MHz-870MHz
Modulation type: F3E
Oscillator system: PLL circuit
Operation distance: About 60m / 200ft
De-emphasis: 50 u/sec
Operation temperature: 0℃±50℃
Storage temperature: -20℃±70℃
receiving sensitivity: Sina>30dB 10dBuV
Squelch sensitivity: 17dBuV±4dBuV
S/N ratio: (f1KHz=1mV)95dB(A)
Audio output level at div.f15 KHz: (F40KHz)800Mv
THD (at SG output 56 dBuV): (f1KHz=1mV)<0.8%
Output impedance: 5K-10K ohms
Power: DC 9V / 3V AA (2 * 1.5V AA)
Current consumption: 9V / 60mA 3V / 100mA
antenna: Dual 1/4 wave length rod antennas
Controls: Audio level volume, channel select switch, ACT key
Display: ACT SEND(white), Power(red), Low Power(orange), Signal(green)
2. Transmitter:
Type: Right-angle
RF output power: 10dB±1dB
Spurious: -50dBm
Modulation factor: 40KHz
Pre-emphasis: 50usec
Maximum input level: +2dBV
Input impedance: 20K ohms
THD: <0.8% (1KHz 100mV)
Audio frequency response: 50Hz-20KHz±3dB
Operating power voltage: 1.5V typical, 1.1V minimum, 2V max
Current consumption: 80mA
Power: 1.5V (AAA size battery)
Antenna: Permanently attached 1/4 wave length wire
Controls: Power switch, 15Db pad switch
Indicators: Power on(LED on), Low battery(LED flash when battery less than 1.1v), ACT(LED on)
3. Power Adapter:
Input: AC120V 60Hz 9W
Output: DC10V 200mA
Plug type: US / UK / EU (optional)
4. Audio cable:
Type: Unbalanced interface
Length: Approx. 90cm / 35in
Package Size: 27 * 22 * 7.5cm / 10.6 * 8.7 * 3in
Package Weight: 993g / 35oz
Package List:
1 * Receiver
1 * Transmitter
1 * Power Adapter
1 * Audio Cable
1 * Operation Manual (English & Chinese)
Note:
The batteries are not included.
One operational manual help you clearly know how to use it.