HOBBYEAGLE A3 Super II 6-axis Airplane Gyro Flight Controller Stabilizer System Gyro with 6 Flight Modes for RC Airplane Fixed Flying Wing Aircraft

The Eagle A3 Super II is our top of the line flight stabilization system designed specifically for fixed-wing aircraft. The A3 Super II has an integrated high precision 6-axis (3 gyro + 3 accelerometers) MEMS sensor with advanced attitude and PID control algorithm. The gyro can accurately detect the angular velocity and attitude of the aircraft and issue commands to all servos, which enables perfect balance and stability throughout the flight. The A3 Super II has built-in capabilities for delta-wing (flying-wing), v-tail, remote master gain adjustment, and separate dual aileron and elevator control. Finally, two of the most exciting new features on this gyro are the One-Click Auto-Recovery which allows you to return your plane to upright, level flight at the flip of a switch (similar to Horizon's SAFE technology) and the One-Click Hover which allows you to put your plane into a perfect hover at the flip of a switch. What are you waiting for? Just come and get it!


Features:
One-click rescue, One-click hover.
H.V(8.4V) receivers and servos supported.
Flat or upright mounting orientations.
32-bit MCU, 3-axis gyroscope and 3-axis accelerometer.
5-level response rate setting allows you to use it on gas-powered planes.
New designed config GUI allows you upgrade the firmware online.
6 flight modes: off, normal, 3D, auto-balance, auto-hover and user defined mode.
2 stick control modes: Manual Mode(MM) and Auto Mode(RR/AR).
Various wing types: 1AIL+1ELE, 2AIL+1ELE, 1AIL+2ELE, 2AIL+2ELE, delta-wing and V-tail.
Separated gain setting and gain rate for each flight mode, remote master gain control.
Compatible with all standard receivers or Futaba's S.Bus/S.Bus single-line receiver.
Up to 333Hz servo operating frequency, compatible with all analog and digital servos.

Specifications:
Brand Name: Hobby Eagle
Item Name: A3 Super II
Main Controller: 32-bit MCU
Sensor: 3-axis gyroscope and 3-axis accelerometer
Gyroscope Scale Range: ±2000 dps
Accelerometer Scale Range: ±4g
Input Signal: Standard PPM with center point 1520uS, or S.Bus serial data
Output Signal: PWM max frequency 333Hz, 1520±500uS
Input Voltage: 4.8V ~ 8.4V
Operating Temp: -10 ℃ ~ 50 ℃
Size: 43 * 27 * 13mm
Weight: 10.2 g (excluding wires)

Package information:
Package size: 10.5 * 7.8 * 3cm / 4.14 * 3.07 * 1.18in
Package weight: 61g / 2.15oz
Gift box package

Package list:
1 * A3 Super II Main Controller
3 * Receiver Wires
2 * Pieces of Double-sided Tapes
1 * Voltage Protector
1 * USB Adapter