Preis nur auf die App:
Diese Seite wird jetzt geladen....
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
A servo with futaba or JR connector
For some reason you have to reposition the left stick so it goes up and down instead of side to side. The right stick is shared with the rudder
By Jimmie Hawkins on April 6, 2018
Yes throttle is on left has click lock for steady speed control
By Joe R. on February 4, 2018
Can you send me a picture? Post a picture here... I'm not sure what you mean exactly.
By Mike Fas on April 27, 2018
I'd say it's good for both. Servos will depend on the size plane or car you are working with. They won't really have anything to do with this. I'm personally using this for my remote controlled lawnmower.
By Mike Fas on April 26, 2018
I found one by the way googling the part number or there website
By dave on April 11, 2018
No. It is not programable. It's set for the reciever that comes with it
By James Barker on April 4, 2018
I m no sure, I just try about 300 or 350 feet and I sure it's working good. I hope you serve.
By Mercedcandia on March 25, 2018
The receiver should, but you're going to need a controller board on the quadcopter itself
By Malachi Allison on March 20, 2018
Yes, however this transmitter is designed for aircraft and uses a aircraft frequency. I think you would be more comfortable using a transmitter with a wheel steering than using sticks. If you are buying it so you can use all 6 channels then yes it will work.
By bob lucus on March 4, 2018
Bitte beachten Sie, dass TOMTOP Forum eine Community für Ideenaustausch und Hilfe sucht, bei denen Tech-Enthusiasten an der Diskussion teilnehmen werden, mittlerweile wird TOMTOP Kundenservice (mit Tomtop Kundenservice-Symbol) rechtzeitig reagieren, mit der gleichen Funktion wie der Kontakt auf http : //www.tomtop.com/contactsÖffne dieses Forum in voller Seite
beyogen auf 111 Kundenbewertungen
Sagen Sie Ihre Meinung mit anderen Kunden und erhalten Tomtop Punkte, die ersten 5 Bewertungen bekommen DOUBLE Tomtop Punkten!Schreiben Sie eine Rezension
By Scarlett McLain
October 12, 2017
Worked for all of two days before quitting none of the sticks respond anymore even though the receiver shows its bound. I've tried reloading settings, rebinding the receiver and nothing. The only input that's registered is down on the right stick, but the receiver doesn't even pick that up. I have no idea what happened. It was working fine and suddenly stopped working all together. Edit: After searching some fours and researchING my problem further I realized my transmitter only needed recalibration. I had to buy the digital radio software, but it is only $2 and is well worth the investment. If you buy this radio, then you really really should buy digital radio as well. You can get a free demo, but you'll need to buy it to do the calibration. Minus one story for one of the toggle switches breaking after a couple days of use, but I'm tech savvy and was able to easily replace and fix the switch.
By AL SMOLKO
May 22, 2017
Good system for the price. if you need instructions to set these systems up, you should be buying at your local hobby shop and pay the price. i am currently using ten of these radios and have not purchased anything else for the past three years. I fly fifteen hundred flights a year plus and several of these systems have well over one thousand flights on them. only problem i have ever had is when ordering replacement receivers usually for crash damage. and i have yet to receive one that would. work. forget about returning anything made in China even if it is defective. you bought it you got it and it is not worth the time or money to return anything. ACCAFLITE RC.
By D. Darby
May 13, 2017
-.75 for not having a return-to-zero spring on the left side and another .25 for including non-standard dis-assembly screw heads. I found the following instructions on the net: On the 6 channel receiver the top connector is the battery connector and it is also where you put the bind plug in when binding it. If you only have a 2 pin battery plug make sure you plug it in so that the black wire is on the right and the red wire is in the middle, the pin on the left will be empty. If you have a 3 pin, 2 wire connector the same applies but you won’t have an empty pin. This is all clearly marked on the receiver. ** If you plug it in wrong you will blow up your receiver ** Now let’s get started; 1) Plug the battery plug into channel 1 (remember red wire in the middle, black on the right). 2) Plug the bind loop into the top connector (marked BAT). 3) There should now be a little red flashing light at the top of the receiver. 4) Put batteries into your transmitter and look at the front of it. 5) On the bottom left hand corner there is a small black circle (BIND RANGE TEST is on the left). 6) Press and hold this circle in and whilst holding it down turn the transmitter on. 7) The flashing red light will now be solid red. 8) Remove the battery plug from the receiver. 9) Remover the bind plug from the receiver. 10)Turn the transmitter off (this stores the settings). The transmitter is now bound to the receiver so when you next plug the battery plug in and turn the transmitter on the red light will come on solid showing it is ready to go.
May 12, 2018
December 6, 2017
October 31, 2017
By Ahmad Malik
October 19, 2017
By Noah Tatko
October 18, 2017
By Dan Radez
June 9, 2017
By Kristine K Hansen
June 1, 2017
By Daniel G. Castro
April 17, 2017
January 14, 2016
January 11, 2016
January 8, 2016
January 6, 2016
December 22, 2015
December 21, 2015
December 20, 2015
March 28, 2015
December 15, 2014
Heiß Ereignis Mehr
Meist gekauft Mehr
Ihre Frage wurde erfolgreich eingereicht
Bitte aktivieren Sie Ihre Registrierungs-E-Mail. Wenn nicht empfangen, klicken Sie auf die Schaltfläche unten