Favoris

Passez la souris pour zoomer

Meterk DK-BL 1500mW Mini bricolage Machine de gravure au laser Bluetooth Bluetooth Print Engraver Bluetooth 4.0 pour iOS / Android Connexion USB pour PC Rapid Speed

Meterk DK-BL 1500mW Mini bricolage Machine de gravure au laser Bluetooth Bluetooth Print Engraver Bluetooth 4.0 pour iOS / Android Connexion USB pour PC Rapid Speed

Prix uniquement sur l'application:

Vous avez déjà TOMTOP APP

Scannez le code du produit à acheter directement!

N'a pas de TOMTOP APP

Téléchargez et profitez d'offres supplémentaires!

De expédition:
  • Entrepôt de Chine
Veuillez sélectionner un entrepôt
livraison:
Habituellement expédié en jours ouvrables heures
livrer:
La demande a échoué! Veuillez réessayer.
Désolé, il semble qu'il n'y a pas de méthodes de livraison disponibles pour votre emplacement.S'il vous pla?t Contactez nous Pour plus d'aide.

Chargement...

Envoyer

United States
Stock dans: china
Quantité:

Special discount has ended

Please note each user for only 1 item(s)

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!

Email:

Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice
Ajouter aux Favoris

Partagez:


Cette mini machine à gravure laser avec une grande précision et une grande stabilité est un cadeau incroyable pour les amateurs de bricolage. Il prend en charge à la fois le bluetooth sans fil et la connexion au câble USB, très pratique que la machine de gravure normale.

Caractéristiques:
Cette machine de gravure au laser de bureau est dotée d'une grande vitesse, d'une haute précision et d'une grande stabilité.
Une technologie innovante appliquée dans ce graveur nouvellement introduit, il prend en charge à la fois le bluetooth sans fil et la connexion par câble USB.
Bluetooth 4.0, communication de données sans fil, APP avancée pour le contrôle de gravure, gravure bricolage à tout moment et n'importe où, simplement à travers un téléphone intelligent ou une tablette.
Soutenez également la connexion USB avec PC, un logiciel spécialisé aide à modifier l'image et à surveiller le processus de gravure. Ce logiciel fournit 6 choix de langue.
Tête laser réglable, pratique pour l'ajustement, assure une gravure de bonne qualité et haute efficacité.
Une application large, bonne en gravure d'image et gravure en profondeur, il suffit d'ajuster la tête laser. Le matériau souple peut même imprimer la 3D et l'effet de dégradé.
L'auto-développement de l'IC et du radiateur, le temps de sculpture durera beaucoup plus longtemps que les autres laser et plus stable.
2 touches pour fonctionner, une pour la mise sous / hors tension, une pour le contrôle hors ligne. C'est parfait pour le fonctionnement par lots de la gravure du logo qui rend le graveur plus pratique. Il suffit de prévoir une image et d'envoyer l'image au graveur.
La batterie au lithium intégrée de 6000mAh fournit une sortie 4A, peut être utilisée sans connexion de câble avec aucune alimentation.
Venez avec les lunettes de protection pour protéger vos yeux contre les blessures par laser.
Le corps en acrylique et l'exécution fine présentent l'excellence de la qualité.
Facile à utiliser et à installer, un excellent cadeau pour les amateurs de bricolage.

Remarque:
1. Les documents peuvent être gravés, y compris: bois dur, plastique, bambou, caoutchouc, cuir, papier découpé ou d'autres matériaux inflammables (comme le boîtier du téléphone, la souris, le crayon, la carte à lettres, le portefeuille, le peigne en plastique, etc.).
2.Le lecteur de carte sera envoyé en couleur aléatoire, s'il vous plaît en nature prévalent!
3. Pour éviter que la tête du laser ne s'efface en cas de surchauffe, éteignez la machine pendant au moins 5 minutes après 30 minutes de fonctionnement continu.


Caractéristiques:
Matériau: Acrylique + Aluminium + Acier inoxydable
Puissance: 1500mW
Version Bluetooth: Bluetooth 4.0
Distance Bluetooth: moins de 10 m
Système de support: pour XP / Win 7 / Win 8 / Win 10 / iOS 9.0 et supérieur / Android 4.0 et versions ultérieures
Batterie: 6000mAh Batterie au lithium
Temps de travail de la batterie: environ 3 heures
DPI: 350dpi
Longueur d'onde du laser: 405 nm
Espace de sculpture: 42 * 42 * 78mm
Température: 500 ° C
Formats d'images pris en charge: JPEG / BMP (24 bits uniquement) / TIFF / PNG (32 bits ou moins) / PCX (8 bits et 24 bit RLE) / PCD
Taille de l'image: 550 * 550 pixels
Mode Gravure: sculpture par bitmap
Entrée: une USB (5V 1A ou 2A)
Le laser peut être remplacé: OUI
Chaque temps de travail: <1 heure
Taille de l'article: 15.2 * 14.2 * 19cm / 5.98 * 5.59 * 7.48in
Poids de l'article: 1088g / 38.39oz
Taille de l'emballage: 29.5 * 19.5 * 20.5cm / 11.61 * 7.68 * 8.07in
Poids du paquet: 1827g / 64.4oz

Liste des colis:
1 * Machine de gravure au laser
1 * Lunettes de protection
1 * Micro USB Cable
1 * Allen Wrench
Lecteur de carte 1 * avec carte TF 1 Go (logiciel / manuel inclus)
1 * Bloc de bois
1 * pochette
1 * Manuel de l'utilisateur

question réponse

  • Q Hallo, wenn der Laser aus China verschickt wird. Wie läuft das am deutschen Zoll? Funktioniert das einwandfrei? Möchte nicht, dass das Gerät dort entweder zurück geschickt wird oder zerstört.

    By Steffi January 31, 2018

    A Wir senden Ihnen das Produkt über den sicheren Kanal zu, Sie brauchen sich keine Sorgen zu machen. We will send the product to you through the safe channel, you do not need to worry.

    Reply By Customer Service Center February 1, 2018
  • Q Diference between 1000mW and 1500mW

    By MAURICIO RIVAS January 12, 2017

    A The Power is different, E2100 is 1500mW. thanks

    Reply By Customer Service Center January 12, 2017
  • Q can this product be used for dishware and for round surfaces as cups, mug?

    By Marcelo Fernandes January 8, 2017

    A Materials can be engraved including: hard wood, plastic, bamboo, rubber, leather, painted metal, cut paper or other flammable materials(such as phone case, mouse, pencil, name card, wallet, plastic comb, etc). and it just for flat surfaces. thanks

    Reply By Customer Service Center January 9, 2017
  • Q I saw the other questions, and engraving metal sheets is not possible... would it be possible in a different machine that you eventually also sell?

    By Marcelo Fernandes January 8, 2017

    A Sorry, there is no . thanks

    Reply By Customer Service Center January 8, 2017
  • Q How large an area can I carve and on what materials !? in cm! A5 size is my target!

    By tony January 6, 2017

    A Carving Space: 42 * 42 * 78mm. Materials can be engraved including: hard wood, plastic, bamboo, rubber, leather, painted metal, cut paper or other flammable materials(such as phone case, mouse, pencil, name card, wallet, plastic comb, etc). thanks

    Reply By Customer Service Center January 7, 2017
  • Q What size is the engraving area? Also what is the difference between this and the 1000 system other than bluetooth?

    By eric wedemeyer January 5, 2017

    A Carving Space: 42 * 42 * 78mm Power: 1500mW thanks

    Reply By Customer Service Center January 6, 2017
  • Q Is this the maximum carving space? Carving Space: 42 * 42 * 78mm Thus in inches 1.65 x 3

    By eric wedemeyer January 5, 2017

    A Carving Space:42 * 42 * 78mm. please according the spec. thanks

    Reply By Customer Service Center January 6, 2017
  • Q Can Mini DIY Laser Engraving Machine be use for metal ??? Thank You

    By Eduardo Venditto January 5, 2017

    A NO. thanks

    Reply By Customer Service Center January 6, 2017

Discussions

Répondez au sujet

Notez que TOMTOP Forum est une communauté pour l'échange d'idées et la recherche d'aide, au cours de laquelle les enthousiastes technologiques participeront à la discussion. Pendant ce temps, le service à la clientèle TOMTOP (avec l'icône Tomtop Customer Service) répondra en temps opportun, avec la même fonction que le contact sur http : //www.tomtop.com/contacts

ouvrez ce forum en pleine page
Avis des clients

Note moyenne:

4.6

basé sur 77 Avis des clients

  • 5 Étoiles
    57%
  • 4 Étoiles
    43%
  • 3 Étoiles
  • 2 Étoiles
  • 1 Étoiles

Partagez votre opinion avec les autres clients et obtenir des points Tomtop, les 5 premiers examens obtiennent le double de points Tomtop!

Écrire un avis de client
  • By sabrina

    March 30, 2017

     Gleich vorweg möchte ich sagen, dass das hier eine umfangreichere Rezension wird. Ich bin der Meinung, dass man ein solches Gerät nicht mit 2-3 Sätzen beschreiben kann. Wer mit dem Gedanken spielt sich so ein Ding zu kaufen sollte sich wirklich gut informieren. LIEFERUMFANG Der Lasergravierer wird in einem Karton in Styropor verpackt geliefert. Das Zubehör befindet sich in einer separaten Schachtel. Beim Auspacken muss man zuerst Klebestreifen die den Laser fixieren sowie zwei Styropor Abstandhalter entfernen. Im Lieferumfang enthalten sind das Gerät selbst, welches schon vollständig zusammengebaut ist, eine Schutzbrille, 2 Papierstücke, 2 Holzscheiben, ein USB Kabel, Inbusschlüssel, USB Stick mit der Software für den PC und ein Benutzerhandbuch (englisch, deutsch und chinesisch). DAS GERÄT An der Rückseite des Gerätes befindet sich der Einschaltknopf. Der Knopf an der Oberseite startet beim ersten Druck die Vorschau, bei der der Laser die Ränder des fertigen Bildes abfährt. Beim zweiten Druck fängt das Gerät mit der Gravur an, beim dritten Druck auf den Knopf pausiert es. Wichtig ist, dass man sobald man das Gerät einschaltet die Schutzbrille aufsetzt. Der Laser der hier verbaut ist, ist wirklich kein Spielzeug! Wenn man ohne Schutzbrille hineinsieht riskiert man irreversible Augenschäden, also bitte haltet euch unbedingt dran! Die Gravurmaschine wird mit dem mitgelieferten USB Kabel und einem Adapter (nicht dabei, sollte aber jeder der ein Handy besitzt zu Hause haben) ans Stromnetz angeschlossen. Es verfügt auch über einen eingebauten Akku, sodass man diesen aufladen und das Gerät dann auch ohne Kabel betreiben kann. Auf der Platte befinden sich zwei Gummibänder mit denen die meisten Stoffe wie Papier, Karton oder Holz befestigt werden können. Wenn das bei anderen Materialien oder Gegenständen nicht funktioniert kann man auch Klebeband zu Hilfe nehmen. PROGRAMM / APP Ich habe das Gerät mit der Android App bedient. Über die mitgelieferte PC Software oder die iPhone App kann ich daher leider nichts sagen. Nachdem aber die Android App sehr gelungen ist, gehe ich davon aus, dass auch die anderen Programme genauso einfach zu bedienen sind. Zuerst verbindet man per Bluetooth sein Androidgerät mit dem Gravierer. Dann wählt man aus seinen Dateien das gewünschte Bild aus, dieses kann man dann noch bearbeiten, wie Linien und Text hinzufügen. Es werden dann zwei verschiedene Arten des Bildes angezeigt und man kann sich die aussuchen die einem besser gefällt. Bei meinem Schriftzug ist hier kein Unterschied zu sehen, bei Fotos jedoch schon. Sobald das Bild an den Gravierer geschickt wird kann man sich auf diesem eine Vorschau der Gravur anzeigen lassen. Dabei fährt der Laser in einem Rechteck die Außenlinien des fertigen Bildes ab, damit kann man kontrollieren, dass man das zu gravierende Material auch richtig positioniert ist. Sollte die Position nicht ganz stimmen kann man mit hoch - runter - rechts - links in der App auch noch eine Feinjustierung vornehmen. Zum Schluss stellt man noch die Stärke bzw. Zeit des Lasers ein. Ich würde für Papier (je nach Stärke) ca. 40-60 empfehlen, für Holz habe ich mit 80-100 gute Ergebnisse erhalten. Sobald man mit diesen Einstellungen fertig ist, geht man auf Start und der Laser fängt an zu gravieren. Sobald die Gravur fertig ist, sollte man per Ausschaltknopf das Gerät ausschalten damit man die Brille abnehmen und sein Werk begutachten kann. ERGEBNIS Das Endergebnis meines ersten Tests hat mich sehr positiv überrascht. Die Linien sind sehr genau gearbeitet, auch kleinste Details sind gut zu sehen. Der Laser ist präzise und liefert auch bei feinen Linien ein sehr gutes Ergebnis. MATERIAL Ich habe bisher versucht: Papier, Karton, Holz und Kunststoff. Es hat alles wunderbar funktioniert. Bei der Einstellung der Brenndauer muss man anfangs einfach ein bisschen herumspielen, bis man den richtigen Wert für sein Material gefunden hat. FAZIT Der Lasergravierer ist ideal für Hobby Bastler oder auch für Firmen, die Werbematerialien wie Schlüsselanhänger, Visitenkarten, etc. mit ihrem Logo versehen wollen. Die Bedienungsanleitung ist zwar in etwas schwammigen Deutsch verfasst, die Android App kann dieses Manko jedoch wieder ausgleichen, da sie wirklich sehr übersichtlich gestaltet ist und man das Motiv noch weiter bearbeiten kann.

    Is this helpful? (1) (0)

  • By josh mendoza

    February 9, 2017

    This engraver is pretty awesome after getting it running. After installing some software from a USB drive, I was able to make designs of things based on drawling’s and certain images, albeit it has to be heavily modified to show up good on burnt material essentially. All the images I have printed have seem to be extremely accurate on cardboard where it would go over spots little by little to burn it in. Yes, this does make a little smoke but it’s smoke detector friendly. In addition, it also runs on lower power such as that of a power bank, another aspect I found really surprising as most expensive engravers and lasers have separate high-power things such as bigger batteries or even its own power out plug. This one seems to cut down on that barrier and simply uses my computer’s USB for power. I have so far burned in cardboard, small pieces of wood and thin plastic for my projects. Using the software is really easy with help of the instructions and using the engraver, having to focus for different objects as the only thing to tweak on the actual engraver itself, is also easy. The engraver is small though, about the size of a laptop, so unless if you’re wanting to engrave small objects, keep this in mind. Tldr; it’s a great mini engraver that can simply be plugged into a computer for use and has engraved extremely accurate burns.

    Is this helpful? (0) (0)

  • By giacomo

    January 16, 2017

    Giocattolino forse solo a prima vista, questo incisore laser, che mi ha davvero stupito... ATTENZIONE PERO' NON è UN GIOCATTOLO, NON UTILIZZARLO VICINO LA PRESENZA DI BAMBINI O ANIMALI ED INDOSSARE GLI OCCHIALI PROTETTIVI, DURANTE IL FUNZIONAMENTO NON GUARDARE DRITTO IL LASER E SOPRATTUTTO NON UTILIZZARE MATERIALI NON CONSIGLIATI. Spedito da Amazon con Prime, non ha tardato ad arrivare. Confezione molto spartana ma comunque l'interno è ben imballato e con tutto il necessario messo per bene. Una volta spacchettato tutto, non ci vuole molto a prendere confidenza, e soprattutto non dovrete assemblare nulla, è tutto già pronto all'uso! Ora ci sono diciamo due modi per utilizzarla... o tramite PC o tramite smartphone. Premetto che l'incisore ha una batteria interna ricaricabile da 6000mAh, e che quindi non ha bisogno di nessun cavo per essere utilizzata con lo smartphone. Tutto quello che ci serve è la sua app, scaricabile tramite QR Code che si trova nel libretto d'uso della stampante. Occhio a scannarizzare quella giusta, c'è sia per iOS, che per Android. Sinceramente con iOS è un pò più lento il procedimento..molto meglio da PC, tanto basta solo un cavetto, previa installazione dei driver e del software. I software, li troverete già immagazzinati all'interno della chiavetta inclusa nella confezione, non vi resta che inserirla nel vostro PC, aprirla, e quindi procedere in questo modo: Dalla chiavetta accedere alla cartella "Drive and Software for window xp.win7.win8.win10" 1 Collegare la stampante tramite cavetto (incluso) 2 Installare Driver.exe 3 Installare Microsoft.NET.exe 4 Installare NEJE V.3.exe 5 Ora potrete utilizzarlo! Nella chiavetta, troverete anche le app Android, le FAQ, alcune immagini per poter utilizzare con la stampante, ed altre info! Nella confezione, oltre alla stampante, infatti, possiamo trovare anche alcuni pezzi di legno e pezzi di cartone da poter utilizzare come prova! Inoltre sono presenti degli occhiali di protezione, foglio illustrativo, cavo usb, e una custodia. Dovrete avere pazienza, e sicuramente avrete soddisfazioni, sperimentando un pò, ma occhio sempre a fare attenzione ai materiali che utilizzate. Per qualunque info, sono a disposizione, basta commentare!

    Is this helpful? (1) (0)

  • By Schluckifuzius

    December 28, 2017

     Der Lasergravierer ist ein wirklich tolles und nützliches Gerät. Er macht es möglich, selbst gestaltete Motive und Schriftzüge in diverse Materialien zu gravieren, und zwar mittels Laser. Hierzu zählen Holz, Papier, Leder und Kunststoff. Die Auswahl ist also reichhaltig. Ich habe mich auf den Betrieb mittels USB-Verbindung konzentriert, da mir die Android App für Tablets noch etwas unausgereift erscheint. Grundsätzlich braucht man sich nur an die einzelnen Schritte der Anleitung halten, um das Gerät in Verwendung zu nehmen. Dem Lieferumfang liegt ein USB-Stick mit Software und Treibern bei. Dem Inhalt kann man getrost vertrauen. Ich habe alles vorher ausgiebig mit diversen Tools prüfen lassen. Zuerst installiert man den Treiber. Dann öffnet man die Software und stellt die Sprache von Chinesisch auf Englisch um. Es steht zwar auch Deutsch zur Auswahl, aber die Übersetzung ins Englische ist wesentlich ausgereifter. Da verschiedene Probematerialien (Holz und Papier) beiliegen, kann man erst mal ein wenig experimentieren, was die Brenndauer angeht, denn hierfür muss man das nötige Gefühl entwickeln. Mein erstes Motiv auf Papier (auf den Bildern im Lasergravierer liegend und im Video ersichtlich) war zum Beispiel verkohlt im gelaserten Bereich. Hier hatte ich Stufe 50 gewählt, 30 hätte aber vollkommen gereicht. Das Motiv auf dem Handycover habe ich mit Stufe 70 graviert und bin absolut zufrieden mit dem Ergebnis. Bis 80 hätte ich aber ohne Probleme noch hochgehen können. Bitte lasst euch nicht vom Brandgeruch verunsichern, das ist normal. Schließlich "brennt" der Laser die Motive ins Material. Hier entstehen Temperaturen von rund 500° Celsius. Also bitte lasst eure Finger aus dem Gerät, wenn es in Aktion ist! :) Sonst habt ihr im besten Fall ein ungewolltes Branding. Und bitte nicht ohne die inkludierte Schutzbrille in den laufenden Laser schauen. Das kann sonst irreparable Schäden an eurer Netzhaut zur Folge haben! Was den maximalen, zu gravierenden Bereich angeht, könnt ihr euch am Motiv vom Handycover orientieren. Das gleiche habe ich vorher zum Test in Papier graviert und für euch ein Lineal zur Orientierung angelegt. Es steht eine Fläche von maximal 4,2 x 4,2 cm zur Verfügung. Ich muss sagen, dass ich mir den Lasergravierer bestellt habe, einfach weil ich neugierig war, in wie weit diese Technologie schon tauglich für den Heimanwender ist. Das war es mir wert und ich habe es nicht bereut. Mit ein paar Abstrichen in der Software und der Übersetzung, ist das Gerät an sich absolut zuverlässig und leicht zu bedienen. Probiert es einfach auch mal aus. Ich würde mich auch freuen, wenn ich mich mit anderen Käufern bzgl. der optimalen Brenndauer bei verschiedenen Materialien austauschen könnte.

    Is this helpful? (0) (0)

  • By Forrest Whitesides

    December 21, 2017

    This thing is actually pretty cool, and it actually does work pretty damn well. However, it would not recommend this for someone new to this type of gadget for a few reasons that I'll get into below. The bluetooth connectivity works very well. I tested on iOS. The app is okay and works fine, but I couldn't figure out how to adjust the burn time (which is kind of important). The built-in rechargeable battery is a really nice touch. Makes the unit very portable. 1500mW is enough to engrave wood to about 1mm. It can cut standard copy paper (20lb) up through the thicker hobby/craft/construction paper. I suspect it can also cut thin cardstock. I will NOT cut any kind of wood (or at least I can't get it to). It will engrave (mark) most kinds of organic materials, as well as opaque plastics. The Good: Resolution is pretty good. Once I got the software sorted out, it was very easy to start marking/engraving wood and paper. It handles fine detail fairly well, although this also depends on the type of material and the burn time. It doesn't do any levels of grey, so some photos engrave well and others don't (high contrast images work best). It's also fun to use, it's self-contained, portable, quiet, and generally works quite well. And it's pretty cheap. It does everything the marketing claims, and there's a lot to be said for that. The Meh: The software itself is pretty easy to use, although it is quite limiting. There is no way to adjust the laser output; it runs at full power all the time, but you can change the run speed which is a roundabout way of scaling down the power. The supplied safety glasses are just very dark instead of the green color that filters out the wavelength the laser diode outputs. This makes it very hard to see what is happening while the laser is working. The max carving area is 42mm x 42mm, which is very small. The Bad: The printed instructions in the box were for the wrong model. It shows a separate power jack and USB port, but the DK-BL charges through the USB port. The software on the the thumb drive wouldn't install on Windows 7 (but might work on other versions), although the driver did work. I managed to find a newer software package online (search for "dk-bl laser software"), but this one also failed on install, but I managed to figure out that the application itself is a standalone .exe file in one folders in the download. The file is called rev20.exe, and it works fine without installing (just double-click to run). Meterk really dropped the ball on manual/software. Final Thoughts: If this machine had 2x the engraving area, it would be a lot more useful to a lot more makers out there. But, it's well designed and solidly assembled. It's also very small and easily portable (the internal battery is unique to this model). Being able to take this somewhere with no cables needed is very cool. This is probably a great thing to get to show the young budding DIY enthusiast how 3-axis tools work.

    Is this helpful? (0) (0)

  • By Patrick Woessner

    December 15, 2017

    Purchased this as a technology teacher to use with students for line-art engraving and couldn't be happier. Setup was pretty easy thanks to advice in previously posted reviews and I was engraving within 15 minutes using a Windows 10 PC. Once the focal length is adjusted for material thickness (make the dot as small as possible), the quality of the images was VERY good and the engrave time relatively short. If you are looking for a laser cutter and/or professional grade engraving unit, this is not it. If you want to dip a toe into the world of engraving wood, this is well worth the money.

    Is this helpful? (0) (0)

  • By Michael

    September 29, 2017

    So far so good. It uses an IAP/STC 15F2K16S microcontroller, which Google spits out an English PDF with all tech specs and programming details. There is also a dinky switch to allow “1A” charging vs 500 mA that is accessible through the hole for the power button, but the ETA9640 converter supports up to 2 A, technically. Max current draw I see is ~850 mA with the supplied cable at 5.09 V. For those who complained about the laser dying after a few hours of use, they probably missed the note about <=30 min of continuous use for the laser. A new one can be had for $20 on Deal Extreme if you search under “Neje”. Bluetooth LE is handled by TI’s CC2541 with a max transfer rate of 2 Mbps. All structural screws are standard M3x10mm. Travel range of the motors are ~42 mm, but I don’t know if they are being stepped in full, half, or smaller microsteps, but the motors are controlled indirectly through the STC uC. There are 4, Unmarked SO-8 chips that appear to be MOSFETs for controlling the motors themselves. Looks to be ~13 revolutions for full travel, end-to-end. There is an unpopulated fan header, “EX IN” and “EX OUT” headers. The latter two are next to a CH340C chip, which appears to be a USB<->Serial converter. Don’t know if they are directly hooked up to it or not. The power for the uC is done through a CMOS JFET linear regulator, the XC6206 in a SOT23 package. This is likely powering the CC2541 too. The fans and other SOT23 power transistors, 4 in total are A2SHB and one A1SHB, but can be replaced by PMV16XN (except the A1SHB) if you want to improve their efficiency. I look forward to hacking this sucker in the future to allow variable power output, pixel burn time, more than 1-bit greyscale depth, and greater resolution.

    Is this helpful? (1) (0)

  • By Sarah Goad

    September 19, 2017

     This machine gave me a few fights but once I got it set up - I fell in love. It has a strong plastic cage around the tray and laser. It connects to the computer through a single USB for both power and data. The setup files came on a thumb drive that installed super fast but needed an update (see noted below). The phone app is easy to find with the QR scanner and is very simple to use. It was very easy to locate my file on the computer, drag it to the engraver app and get working. The final engraving area is approximately the size of a school picture. This little machine gave me a taste and I'll keep it to do smaller stuff like coasters but I can't wait to buy a bigger one. This is a great entry level machine for crafters! Ok so I've gotta admit- I had some trouble setting this up. I'd tried and tried and was ready to give up. So I'm gonna give you tips for the install so you can love it as much as I do. First, don't try to use the website that is on the thumb drive. The Chinese government shut it down. lol Second, if you get the error message that the app can't run on your windows machine, go to the trusfer website to download the updated driver. If you have Windows 10, use the second download link (the smaller file). The app will be in Chinese - but if you look in your instructions - there are labels for everything vital in the app.Third, it says to adjust the focal length but it doesn't say how. Put on the glasses and turn the silver collar around the laser, it will get larger or smaller each direction. Make it the smallest point possible. Finally, don't give up if you run it through and you don't really see anything. Just leave it exactly where it is and run it again and again. Happy engraving!

    Is this helpful? (0) (0)

  • By Sheepdog

    September 18, 2017

     I was thinking the setup would be difficult based on a couple reviews but from my experience it was very easy. I did not do a PC setup, I did all of the setup from my phone. It's a pretty easy process. Step 1. Scan QR code provided, and download the app. Step 2. Turn on engraver, open app and connect to Bluetooth. (Make sure the phone Bluetooth is enabled. Connection is made within the app, not under Bluetooth options.) Step 3. Chose an image within the app or upload your own. You can easily save images from the web and upload those too. Squares work best. I show some of the app in the video for your reference. I'm not sure how the PC install is but using it via Mobile Bluetooth it was surprising easy. And maybe the Bluetooth wasn't available on the 1000 model, but is on the 1500. It's perfect for small crafts, I plan on trying new materials like leather to see how it does. So far i like what i have been able to make with it.

    Is this helpful? (0) (0)

  • By Sheba.Milo

    September 15, 2017

     I have always wanted an engraver printer and as this was in the range I wanted to spend for this I thought I'd give it a try. It has a small footprint so you don't have to worry about finding a place to use this. I find I utilize things like this more if I have a designated spot for it. I did a test print of an image I embroidered on a handkerchief last Christmas. It came out great! Set-up was easy all I did was remove all the packaging from the box, scanned the QR code from the manual to download the app, then I just followed the directions in the manual. I found when choosing an image to print that the more simple the better. My test print came out perfectly! This is such a neat tool to use I perhaps will try on different materials such as leather and wood next time. This definitely is such a nice purchase and would recommend to any crafter out there.

    Is this helpful? (0) (0)

  • By Harvey

    September 14, 2017

    This machine does very well at engraving wood, and I find it to be extremely precise. I was able to engrave a detailed monogram into wood and it came out sharp looking. Just a little coat of varnish on top and the design pops! I like how the machine can be used wirelessly with an app over Bluetooth, or via USB connected to the computer. I used the app to engrave, and it was very easy. I opened the app and connected to the engraver, then selected my design through the built in file manager, and then sent it to the engraver. Depending on the material I engrave, the engraving time varies based on how flammable the object is. For example, I engraved wood, paper and even flower petals and it took only a few minutes. But when I tried engraving a silicone phone case, it didn't work, simply because it has a much higher burning point. The build quality is excellent. Included in the package were some sample pieces of wood, a silicone pad to stick things in place, and a pair of tinted glasses, but I strongly suggest that you don't look at the laser as it can cause permanent eye damage.

    Is this helpful? (0) (0)

  • By Eric L.

    September 11, 2017

    First off, don't listen to the negative reviews about this laser engraver. Either they didn't take the time to learn how to use it, or they tried using it for a purpose it wasn't meant for. This machine really works great! What this machine does (as far as things I've actually tested myself): - Engraves paper at power level 40/120 - Engraves softwood & hardwood (walnut, hard maple, etc.) with ease at power level 60/120 - Cuts regular paper at power level 80/120 - At power level 120, I'd imagine it'd cut cardstock. - Based on my experience I'd imagine it would engrave leather and similar materials easily. - If you need an extra deep engraving, you can always run 2+ passes over the material. What this machine does not do: - The instructions say it will not engrave metal. I haven't tried though. - It also says it won't engrave anything reflective or clear, since the laser won't properly burn on it. It takes at least an hour to really learn how to use, but once you understand it, you can really do a lot. I had a few problems throughout the learning process, but with a patience I figured them all out, and the machine runs perfect. Here were my issues and the solutions.. 1st Issue: Laser was engaging, but engravings were totally messed up. Solution: There was a little piece of foam behind the laser head that I missed when unpacking. It was preventing the head from moving smoothly and caused my engravings to be completely illegible. 2nd Issue: Engravings weren't at full power Solution: Adjust the laser focus. Use the glasses and twist the little ring around the laser head until the dot is at it's smallest and sharpest point. 3nd Issue: Large engravings would stop near edges of design Solution: Basically the bed wasn't centered in the track when I started engraving, so near the edges it wouldn't have enough room to finish. There are four buttons on the program that control the machine under "Action Control", that allow you to move the bed. Make sure you center it in the track before starting, and you won't have any issues. 4rd Issue: Material would move while engraving Solution: The best way to hold down the material is with the rubber mat they give you, and both rubber bands, either with 2 on one side, or one on each side, depending on where you're engraving. 5th Issue: Having trouble identifying where the engraving will be Solution: I like to use the "Rectangle Locate" button the program, it uses the light dot and just moves along the edges of your image, so you can see the border. Click the "Center Locate" button to stop it moving, and adjust your material accordingly. After I figured out all these issues, I've put hours of runtime on it with no issues. The only downside is it only engraves a 1.5" x 1.5" area, but it's all I needed. If you need more space than that, you might have to look elsewhere. All in all, I'd definitely buy one of these again.

    Is this helpful? (0) (0)

  • By Adam Adams

    September 5, 2017

    Arrived quickly (thanks Amazon). I'm going write this review to answer some of the initial questions I had about the product. Firstly, this does not really engrave to the point you feel a beveled edge. It burn-scores your material and leaves some charred residue afterwards, so be careful when initially handling your engraved item. I did accidentally smear charred bits onto the rest of my wood and couldn't get it out. This is not too much a problem from the product, it's just something to note about the engraving process. Secondly, the resolution at which this engraves was actually quite impressive. I've made a couple of medallions with some text on it and was so clear to that even the "nd" in "2nd" was clearly visible. I do however recommend you use a higher resolution image than the dimensions of your engraving area. At first, I saw there was a 50mm X 50mm area for the image so I drafted something with the same dimensions in photoshop. When I transposed it to the NEJE software, the resolution of the image was horrendous. I know I could have up'd the DPI to an insane amount but the software tried to resize the image the best it can to fit the engraving area. I find it's easier to work with higher resolution, so I set my canvas area to 1000px X 1000px. Lastly is the software. The software install guide was a little difficult to walk through, and I'm an IT guy by trade. I very well may have missed something, but the software doesn't actually get installed on your computer. It launches from the disc, or you can copy it to your computer and launch from there. The language translation isn't perfect, so don't expect it to be grammatically correct or have perfect spelling. That being said, it's not very clear on how to use the software, but thankfully it's relatively easy to fumble through. I'm giving this product 4 stars for two reasons, resolution and cost. This item is good for a hobbyist and cheap for the capability. The main issue I have is that it doesn't truly engrave and still leaves the product smooth to touch.

    Is this helpful? (0) (0)

  • By tatt2edtears06

    March 20, 2017

     When I first got this Meterk DK-BL 1500mW Mini DIY Laser Engraving Machine I have to admit that the task of learning how to use it was quite daunting, I still haven't mastered everything I can possibly do with it yet. The instructions are intelligible however they are poorly translated and I think it would be easier to figure out if they were better translated. One of the issues I most had with the instructions were that they showed pictures of the program files that come on a USB stick, however what was in the USB didn't look anything like the pictures on the instructions, and that really threw me off. It says you need to INSTALL the programs, however all you really need to do is copy them to your desktop. I like that they included some pictures in the program files, such as practice pictures, and ideas on things that you can make. However I do wish that they would change a few things on the program to make it easier for you to move and place items like text and pictures. Once you get the engraver set up its fairly easy to use. The ON/OFF button is hid inside a hole for safety (the red button on top is NOT the power button). The more I tinkered around with the program the easier things seemed. You can use pictures from the internet or you can make your own in a paint-like program. I do recommend if you need to do any adjusting to the pictures you use, such as making them smaller or larger or anything like that, you use another program and then just save them to your desktop. The first time I made something I didn't realize how small it would be, you need to fill the program box if you want a rather large picture. Also, its important that you center your item and use the rubber bands to hold it down, otherwise the item may move even slightly and ruin your whole engraving. I wish they had some way other than rubber bands for this, like a peg board or something that would keep your item from slipping. This is not for big engraving, and you have to have something small enough to fit in the box in order to engrave it. However it can be used for many things, and is a great project tool and perfect for adding to my craft supplies. Would be great for making magnets or wood coins, you can even engrave the back of a cell phone case! Even though it has some things I would change, its an overall great product that works amazingly. The possibilities are limitless! ~Thanx~

    Is this helpful? (0) (0)

  • By robin

    March 14, 2017

    Awesome! I might suggest  eBoot 10 Pieces Sticky Gel Pads Non-slip Pads Cell Pads Anti-slip Mats for Wide Applications, Black  I used these in place of the rubber bands. They are also sold in smaller packs. This makes loading and securing the item to be engraved much easier and quicker for me. The engraver works fine for an image up to 42mmx42mm. Laser moves side-to-side and platform for material moves front-to-back. Pros: Once an image is loaded to the device, you can print disconnected from pc. Can type text in the software to create an image PC software allows you to increase burn time(had no problem installing on Win10/64) Cons: I couldn't get the iOS software to work Rubber bands were a little cumbersome PC Software would be nice if it zoomed in(only zooms out) to allow scaling Awkward(minor) problems with pc software

    Is this helpful? (0) (0)

  • By jacinda rilla wright

    February 24, 2017

     This Meterk DK-BL 1500mW Mini DIY Laser Engraving Machine Wireless Bluetooth Print Engraver Bluetooth 4.0 for iOS/Android USB Connection for PC Rapid Speed , is sized at 15.2 * 14.2 * 19cm / 5.98 * 5.59 * 7.48in. In this package, you will receive everything needed to get started and to use this. 1 * Laser Engraving Machine 1 * Protective Glasses 1 * Micro USB Cable 1 * Allen Wrench 1 * Card Reader with 1GB TF Card(software/manual included) 1 * Wood Block 1 * Pouch 1 * User Manual This can be used on and for so many different things. So many different materials. This can be used on such materials as hard wood, plastic, bamboo, rubber, leather, painted metal, cut paper or other flammable materials. Examples are such as phone case, mouse, pencil, name card, wallet, plastic comb, and much more. This has Bluetooth 4.0, wireless data communication, plus advanced APP for engraving control. You can have DIY engraving anytime and anywhere just through a smart phone or a tablet. This can also support USB connection with PC. The specialized software can help to edit the picture and monitor the engraving process. This has a adjustable laser head. It is very easy to adjust. This is So easy to use. It is lightweight and durable. Just the right size, so it can easily be placed in smaller places. You can use this for all kinds of things. Fun to watch as your picture grows. This can even do a lot of fine details. Fun for the whole family. Warning. A child should never use this alone. I love mine. I used it on a small block of wood and made a palm tree. Very nice. Great to have around. Perfect to have on hand. This would make a wonderful gift. Very fast shipping

    Is this helpful? (0) (0)

  • By larry j.

    January 24, 2017

    This is a fantastic machine, for the price. It comes with preloaded demo etch, and it's exactly the same as the factory test etch, in place on the plate. Doesn't have a fan, but this is a non issue, the laser head is very efficient and doesn't need extra cooling. Both axis mounts are made from base mounts of old style DVD drives, don't let that bother you, those were heavy duty items, with dual support rods on both. Be aware that there are no limit switches, on either axis. I doubt there would be any issue with this, but you need to be sure that laser is centered on both axis, when you start your etch. On the back, you will find five push buttons, on the card, to move the head. It's partially covered by the back plate, but fairly easy to get to. Don't try moving the head by hand, the stepper motor shaft will mess up the guides on the position guides. As mentioned in the manual, you'll find that Laser won't work right, if you try to power it from a PC port. They recommend 1A 5V supplies for the two USB connections. You upload your sketch to the machine, then it is stored inside the machine. Once that's done, unplug the PC USB and plug into a 1A 5V adapter. The manual will tell you what to do with the big RED button on top. One thing to watch out for, is to stay with your machine, while its working. Not necessarily staring at it, but to be ready, when it is finished. It will repeat the stored etching again, if you don't stop it, by pressing the RED button to abort. The SD that comes with the machine scanned virus free, on mine. It only had drivers and software for PC only. The website that has the software for Android and IOS has a virus warning, when you try to go there. My antivirus had no problem, loading and installing the enclosed SD, but went crazy, when trying to upgrade. That was a small issue compared to the bang for your bucks, with this machine. Overall this a great machine for the money, does a great job for small item etching, and is a fine platform to use for home brew upgrades, for the tinkerer.

    Is this helpful? (0) (0)

  • By geeno

    January 21, 2017

    This review has a good chance of going up or down. I received my printer and was able to decipher the instructions. The manual is worthless and saying it is broken English would be a compliment. Meterk recommends Android operating system for Bluetooth, as iOS may cause a long time in downloading to machine. I would say it takes 3-4 minutes to transfer via Bluetooth to the printer from my iPhone 7= or my iPad Pro. I need to dig out the old galaxy tablet and see if it is any better. The Bluetooth lets you make an okay print from a jpeg file but has no editing available. Now my real problem the included software won't "unzip" the file comes up as corrupted. I have tried opening this on 6 different computers and 3 different operating systems (XP, Windows 7 and Windows 10) with 5 different zip programs. I have emailed their customer service to find out if there is a download package for the software if not it look like this guy is going back. They did get back and the new software didn't work. Took a YouTube/Google search to find a link that provided software that works. I am happy. I just have to remember it is not a GlowForge it is an entry level unit and functions has such.

    Is this helpful? (0) (0)

  • By jerrod balzer

    January 19, 2017

     I've always thought it would be so cool to be able to engrave our names onto leather tags for backpacks, luggage, purses, bracelets, necklaces, and such, or even pieces of wood. There are so many crafting possibilities, but lasers are generally so expensive. Well, I gave this one a shot and I was not disappointed. It arrived with the laser equipment, moveable parts taped down to avoid damage, along with focus glasses and a velvet pouch for them, an allen wrench for replacing the laser tube, a small wooden block to practice on, a USB stick that holds a 1GB micro SD card, and the user manual that has many languages, English among them. On the equipment is a piece of thick paper with a butterfly engraved on it. This was to show the machine was tested at the factory for quality before leaving. I thought that was a nice touch. My first and only hang-up was installing the driver on my Windows 10. The driver on the SD card, via USB, was outdated and would not unpack on Win10. I went to trusfer dot com to download the latest, which they had right at the top of their Downloads page, and it was a bit of a pain to get. On my high speed DSL, it took hours to download this 57mb file, and it failed a few times at that. I'm guessing their site has server issues that limit download speeds or something. I was able to get the driver with some patience, however, and everything worked perfectly once installed. This hiccup with obtaining the updated driver is the reason I removed one star. The rest was easy. It is powered by two USB cords, provided: one for the machine and one for the laser/communicating with the computer. I plugged one into a surge protector that had USB ports, and the other into the computer. I put the sample piece of wood on the machine's platform and held it in place with a rubber band. Next, I put on the focus glasses and turned the very end of the laser until the dot on the wood was its smallest. Next, I opened the laser software (found with the updated driver) and inserted a black and white image. I pressed the red button on the laser and it began outlining the wood block, figuring out the size of the work space. Then I pressed the Start button on the software and it began. It said "30" for burn time but it only took 11:34 minutes. It came out perfectly! I'm thrilled with my new crafting tool and can't wait to try more things. And if the laser tube goes out, more can be ordered at the trusfer dot com site. By the way, my Firefox browser threw up all kinds of warnings when I went to their site. I ignore the warnings and had no problems. My antivirus software also did not like their driver when I started it, but since installation, there have been no issues. I figured I should let you know in case anyone gets spooked by that.

    Is this helpful? (0) (0)

  • By nolivier

    January 13, 2017

     Cette imprimante laser a pour but de graver diverses matières à la façon d'un pyrograveur mais...programmé ! Le manuel n'est pas en français, les apps smartphones sont sommaires (celle pour iOS ne fonctionne pas correctement), mais après maintes tentatives, cela fonctionne. Il ne faut pas vraiment suivre les étapes proposées par le manuel... Les vidéos Youtube n'aident pas non plus énormément. Autrement dit, il faut fouiner, essayer... Pour en venir au concret, il faut essayer une pré-gravure pour voir si la vitesse de gravure convient ou non. Cela dépend de la matière. Un résultat un peu mitigé pour un ignare de la chose comme moi ! Mais l'ensemble est bien fabriqué, c'est du solide. On regrette juste que les apps smartphone ne soient pas assez bien développées. Mais sinon, c'est du sérieux.

    Is this helpful? (0) (0)

Agenda Evénements Plus

Meilleures ventes Plus

Veuillez activer votre e-mail d'inscription. Si non reçu cliquez sur le bouton ci-dessous

Recently Viewed