Quelima

Favoris

Passez la souris pour zoomer

N3 de sans fil de déclenchement à distance Flash YongNuo RF-603N II pour Nikon D90 D600 D3000 D5000 D7000

N3 de sans fil de déclenchement à distance Flash YongNuo RF-603N II pour Nikon D90 D600 D3000 D5000 D7000

Prix uniquement sur l'application:

Vous avez déjà TOMTOP APP

Scannez le code du produit à acheter directement!

N'a pas de TOMTOP APP

Téléchargez et profitez d'offres supplémentaires!

De expédition:
  • Entrepôt de Chine
Veuillez sélectionner un entrepôt
livraison:
Habituellement expédié en jours ouvrables heures
livrer:
La demande a échoué! Veuillez réessayer.
Désolé, il semble qu'il n'y a pas de méthodes de livraison disponibles pour votre emplacement.S'il vous pla?t Contactez nous Pour plus d'aide.

Chargement...

Envoyer

United States
Stock dans: china
Quantité:

Chaque utilisateur ne peut acheter que des 5 Pièce

Special discount has ended

Please note each user for only 1 item(s)

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!

Email:

Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice

Protection d'acheteur

  • Remboursement intégralSi vous ne recevez pas votre commande
  • Remboursement complet ou partiel , Si l'article n'est pas comme décrit Apprendre encore plus >
Caractéristiques :
le nouveau RF-603 II est une version améliorée de RF-603, c'est un déclencheur à distance ainsi qu'un déclencheur flash multifonctionnel qui peut déclencher de façon synchrone de bouffées de chaleur et de flashes de studio. 
par l'intermédiaire de l'émetteur/récepteur système que chaque élément peut être utilisé avec souplesse comme déclencheur ou un récepteur de base. 
seulement 2 piles type AAA sont requises comme source d'alimentation pour chaque élément.
la fréquence de 2,4 GHz sans fil convient dans la plupart des pays et garantit la stabilité, de distance et de vitesse élevée. Dans les zones de grande capacités, la distance de la télécommande peut atteindre jusqu'à 100m. 
la vitesse de synchronisation peut atteindre à 1/320, selon la situation.

Improved caractéristiques :
1. Griffe de verrouillage pour empêcher de glisser
2. Mettez de côté pour l'opération facile
3. Fonctions améliorées Auto detection system


:
prend en charge le déclenchement contact unique.
peut réaliser la fonction de déclenchement déclencheur filaire et sans fil à distance.
Flash Trigger : au feu le Flash Speedlite ; au feu Studio stroboscope (vous devez acheter un câble supplémentaire 6,35 mm pour remplir cette fonction).
vous pouvez utiliser simultaneousty au-dessus de deux fonctions.


cette liste est pour la version N3 :
pour Nikon D90 D600 D3000series D5000series D7000series

Spécifications :
Type : FSK 2,4 GHz sans fil à distance SUST
distance de l'émetteur : 100M
Channel : 16 canaux
Release : presse à mi-chemin, plein-manière presse
interface de récepteur : one est 2,5 mm socket
Studio interface flash de lumière : Standard PC socket
type de batterie: 2 * temps
stand-by AAA (non incluse) : Jusqu'à 45hours (TRX) ; jusqu'à 400hours
(TX) taille de l'élément : 80,7 * 31,3 * 25,9 mm / 3.2 * 1.2 * 1,0 dans
numéro poids : 44g/1,6 oz (chacun)
taille du paquet : 16 * 9 * 4.5 cm / 6.3 * 3,5 * 1,8 dans
le poids du colis : 6,0 oz / 170g

Package List :
1 * ARVA
1 *
récepteur 1 * Shutter raccordement calbe N3
1 *

Domande e risposte dei clienti

Trier:
3
Q

Will the trigger work with a Nikon D800 and YN565EX?

A
  • It works on my D7100 and D750. Can't see why it will not work on your D800. It is not a "Pass through" signal however. If you mount you flash on top of the wireless trigger is will not fire the flash - only the shutter. I know strange - so why did they put a hot shoe mount on the trigger. Check the specs. You'll … see more It works on my D7100 and D750. Can't see why it will not work on your D800. It is not a "Pass through" signal however. If you mount you flash on top of the wireless trigger is will not fire the flash - only the shutter. I know strange - so why did they put a hot shoe mount on the trigger. Check the specs. You'll find that it says that it is not a pass through signal. Yongnuo does make a trigger that is pass through for Nikon I think it is their YN-622N see less

    By Eagle Spotter on November 20, 2017

(2)
1
Q

If I buy two sets which is total of 4, will they all work together? Thank You.

A
  • You can buy as many sets as you want and they'll all work together, provided the dip switches are set the same. I have four sets. I use one on the hot shoe, six on different flashes, and one in my hand for shutter release.

    By Stacy M. on March 9, 2018

(4)
1
Q

Did you need a synch cable on your omd m-10 or can it be used without? I have an OMD M-E5 and assume if it works on the 10 it will work for me.

A
  • The flash with work fine, but only manual setting, you do not need a syn cable, I mistakenly though you were asking about remote camera control with the syn cable to the Yongnuo remote unit, I have not found the syn cable to work here.

    By chrisking on February 6, 2018

(3)
1
Q

Can someone please summarize what all needs to be bought to control 2 external flashes? 2 of RF-603NII-N3 on 2 of the YN 560 III can be controlled ?

A
  • You will need to purchase at least three RF-603NII-N3. One mounts on the camera hot shoe and one on each flash, for a total of 3. If you purchase a 4th it can be used as a remote control for the camera, but you must connect the sync cable to the camera as well.

    By Rika Miyasaka on November 26, 2017

(4)
1
Q

Ok so if i have the yongnuo yn560-tx, can these be attached to two different speedlights? or is one strictly for the camera?

A
  • Mine can each be set to be a receiver or transmitter. I have four units. I have, in the past, set one of mine up as a transmitter mounted on and triggered by the camera and the other three of three different speedlights. Based upon my experience, I would say that yes they can as long as you have one working as a tra… see more Mine can each be set to be a receiver or transmitter. I have four units. I have, in the past, set one of mine up as a transmitter mounted on and triggered by the camera and the other three of three different speedlights. Based upon my experience, I would say that yes they can as long as you have one working as a transmitter. One thing that I have NOT tried is mounting one on the camera and still having it trigger a flash mounted on it's hot shoe. see less

    By P. W. Ramsey on August 28, 2017

(1)
1
Q

with nikon d610, the yongnuo YN 560 II and the RF603N II trigger - im not sure what setting the camera should have to fire the flash. it isnt firing

A
  • As far as I know the camera does not need to be in any particular setting for the flash to fire. Make sure you can fire the flash independednt of the camera, that is by pressing the button on one of the triggers manually.

    By Ahsan J. Sharafuddin on August 7, 2017

(3)
1
Q

Does it work for my Nikon D3200?

A
  • yes it does, but keep in mind that it does not allow for ttl... and any flash you put on the 'receiver' (as one will be transmitter_ the other will be receiver) will have to be manually changed. EI... the flash it to bright, you will have to walk over and change the settings on the flash yourself.

    By me on May 20, 2017

(1)
0
Q

Will these triggers work with the Fuji XE2 and SB900?

A
  • Used mine only with Nikon. Sorry here.

    By John Garland on May 18, 2018

0
Q

Will it work with D3200

A
  • Don't see why not

    By Ronald Goren on May 13, 2018

0
Q

Do these work with a nikon d5500 and the aperlite yh-700n

A
  • They definitely work with the d5500 and Yongnuo's speedlite , but I don't know about the aperlite yh-700n.

    By Dave H on May 13, 2018

(2)

Discussions

Répondez au sujet

Notez que TOMTOP Forum est une communauté pour l'échange d'idées et la recherche d'aide, au cours de laquelle les enthousiastes technologiques participeront à la discussion. Pendant ce temps, le service à la clientèle TOMTOP (avec l'icône Tomtop Customer Service) répondra en temps opportun, avec la même fonction que le contact sur http : //www.tomtop.com/contacts

ouvrez ce forum en pleine page
Avis des clients

Note moyenne:

4.9

basé sur 732 Avis des clients

  • 5 Étoiles
    85%
  • 4 Étoiles
    15%
  • 3 Étoiles
  • 2 Étoiles
  • 1 Étoiles

Partagez votre opinion avec les autres clients et obtenir des points Tomtop, les 5 premiers examens obtiennent le double de points Tomtop!

Écrire un avis de client
  • By alfonso a. tobar

    December 7, 2016

    The RF-603 wireless unit can trigger both portable flash units or speedlites, and Studio flash units as well. Apparently, the maximum flash sync speed allowed in SLR's or DSLR's is their maximum sync shutter speed for that camera provided transceiver is used as pass through for a flash unit (*). [In my Nikons D300S, 1/320s (Auto FP) and 1/250s (Auto FP) are maximum sync shutter speeds]. My tests were performed in a Nikon DSLR D300S, and maximum sync acceptable shutter speed, however, was obtained at 1/200 and below when one transceiver was used in the DSLR's hot shoe as a transmitter and another as a receiver in an off-camera flash. Therefore, I found that maximum flash sync shutter speed will decrease and this was very noticeably in my random tests. Therefore, the highest max sync shutter indicated by the manufacturer will be ONLY valid for the on-camera flash when transceiver is used as a pass-through on-camera. Secondly, the transceiver by itself can not be used to test fire remote flashes with transceivers acting as receivers in flash units. (Open Flash Test triggering not supported.) (*) 1/250 sec sync shutter speed can ONLY be obtained when Flash unit is mounted directly on the camera hot shoe as a pass through. Please see more photos at shutterbugcl DOT blogspot DOT com. I noticed a few misfires probably because I must have done something wrong. The RF-603 were tested out of the box. For a detailed review and sample photos, please visit shutterbugcl DOT blogspot DOT com. The overall performance was excellent anyway. Great results! --- UPDATE [Nov.27_2011]: I bought these units to be specifically used with the new Fujifilm X10 12 megapixel EXR CMOS Rangefinder Camerato be released by November 9, 2011 that I have already pre-ordered from AMAZON. In the meantime I decided to perform test runs to make sure everything was OK. Wireless are great for any camera model and manual flash units. Unfortunately, they do no work with new Fuji X10 or X100 rangefinder cameras. Wireless Transceiver Pins are not thin enough to communicate with their hot shoes. By LATIN IMAGE Photography latinimage DOT blogspot DOT com ---

    Is this helpful? (0) (0)

  • By Shenanuke

    December 13, 2017

    Great value for non-TTL off-camera speedlight radio triggers. Be warned, though - advertised sync speed may fall short in reality. I'm using these on a Nikon D600 and a Nikon SB700 (as well as a Yongnuo 560ex III), and I can only sync at 1/160 with either speedlight instead of the advertised 1/200 (D600 sync speed is up to 1/200). At 1/200, I get shadows at the bottom of the frame, which makes for unusable photos. The description for this item on Amazon reads "The synchronization speed can reach to 1/320, depending on the situation it may reach to 1/250 or less." I guess "less" was promise and the reality of the situation. Then again, these triggers were super cheap. If I upgrade, I'm going for a Phottix Odin system to replace. But these'll work for now I suppose.

    Is this helpful? (0) (0)

  • By Tech Sage

    December 10, 2017

    After much research including into expensive options such as Pocket Wizard, decided to give these affordable trigger units a try. Bought two for a simple home photo studio off-camera flash use - one unit on camera and one unit for flash. Units worked right out of the box with the default code set inside. The units performed so well (had only one miss over the course of several days) that I went ahead and procured two more so I can have two off-camera flashes. The battery life on the units units appear to be very good. My setup is around a Nikon D3100: Camera: Nikon D3100 (set in Manual mode with A=f7.1 and S=1/200) Flash units (2): Yongnuo YN560 (power level setup - 50) Wireless flash trigger units (3): Youngnuo RF-603 (1 on camera and 2 for the flashes) Hotshoe and Umbrella adapters (2): Calumet Umbrella and background stand kit: Cowboy Studio With the exception of the D3100, all the other parts in the above list were ordered from Amazon. To be clear, these units DO NOT SUPPORT TTL, if that is important for your use. I set my flashes to Manual mode and played around with the power output levels to get the right expsoure for a f7.1/200 setting on the D3100. Mighty pleased with the picture quality. I have now added Umbrellas over my flashes to get even better lighting and completly eliminate shadows. I would highly recommend this product - along with the companion YN-560 flashes from the same manufacturer - for any amateur photographer desiring to setup a decent home photo studio on a small budget (TOTAL COST excluding the D3100 of course ~$550.00).

    Is this helpful? (0) (0)

  • By JackW

    November 18, 2017

    These are fairly well built and worked great when I tested them with my Nikon D5100 and Sunpak off camera flash. It really is only lacking a locking ring on the hot shoe foot. After a little more testing, I'll probably be ordering a second pair. Update: I now have 2 sets of these (4 total) and am using them with an older Sunpak 544 flash and a new Metz AF-1 52. 1 on each flash, one on the camera as a remote shutter release and hand hold the 4th as a remote trigger so I can walk around and shoot from anywhere in the room. The system works well, with only the occasional misfire. I have found that although my camera has a max flash sync speed of 1/200th, I can only shoot at a max of 1/160th with these triggers without having a slight dark band at the bottom of my photos. I imagine this is because of a slight delay from the radio triggers. it hasn't been an issue for the way i shoot, but it's worth mentioning I think. I have been very pleased with the battery life on these units. I have shot well over 300 shots in a session using AAA rechargeable batteries without exhausting them to the point where they won't fire. The unit I use for triggering(transmitter) does deplete faster than the units that are receiving only for obvious reasons. From my battery charger readings after a shoot, I'd guess the receivers could easily go at least 500 fires before the batteries were exhausted. I'm still very satisfied with the triggers, especially at this price.

    Is this helpful? (0) (0)

  • By R. J. Lowe

    November 15, 2017

    I bought 2 sets so that I could have one on-camera and fire 3 YN560 strobes. It works great for that. However: 1: The sync speed is a bit muddy - I use a Nikon D7000, whose sync speed is 1/250. These triggers have a tough time at 1/200 where you still see darkening on one edge of the image. At 1/250 nearly half the frame is dark. You really need to step down below 1/200 to get acceptable images without 'catching' the closing curtain. 2: You cannot turn the units off/on with the flash mounted. Seems like a dumb design mistake since the triggers and the flashes are both from Yongnuo. The flashes ride nearly flush over the top of the on/off switches - which should have been located on the side of trigger - seems obvious, but they didn't do it that way. So now both the triggers and the flashes will get much more wear & tear mounting and unmounting just to turn the units off/on. Dumb. If you can live with those caveats, the units are great and I haven't had any other issues with the set-up described.

    Is this helpful? (0) (0)

  • By HM

    October 23, 2017

    This trigger system is super easy to use and has worked very well. I have only had a few instances where it failed to fire my flash. Easy to pair with the Yongnuo YN 560 III I bought at the same time. You set the channel with dip switches on these and you can easily match it on the flash itself. Don't expect the wireless trigger to work unless you verify your camera has the correct input for the cable provided. Overall, these are an awesome value when you're building a system on a small budget or aren't going to be using all the time.

    Is this helpful? (0) (0)

  • By anotherphotographer

    October 18, 2017

    Took zero setup to configure to work with the YN-560 III for wireless triggering. Good range. I had my camera located outside, trying to get shots of the meteor shower a few nights ago and was able to trigger the camera from the warmth of my room. Unfortunately - cloud cover didn't net me any asteroid photos. Either way, the trigger worked great. Though - it should have a threaded hotshoe - so it can be connected to a light stand or tripod. Only reason it loses a star. Kinda wish they'd come with some sort of carrying case, too. But, at this price - very happy.

    Is this helpful? (0) (0)

  • By MattosTKE

    October 18, 2017

    I've previously used Cowboy Studio flash trigger as well as Pocketwizard Plus II's, so I know my way around remote triggers. Unable to afford 4 PW Plus II's I went with four of these Yongnuo RF-603's. My current setup with these is a Nikon D7000, SB-700 and two SB-28's. Build - The build quality seems very sturdy, tough plastic, not like the Cowboy Studio receiver & transmitter. They take AAA batteries and not watch batteries, which is great, since I have a ton of Eneloops in my bag. The shoe is made of metal, i've clamped it down pretty hard with no issues. Some people stated that you can't lock the trigger to the camera, this is true but it's on there pretty tight. The only way I can see it falling off is if you drop your camera, and if you do that you have bigger problems. Performance - The Cowboy studio receiver/transmitter would lose connectivity to each other if you did not trigger it often, so if you where shooting and adjusting your lights, you would have to press the "test trigger" button to wake everything up. With the Yongnuo's all you have to do is activate the autofocus on your camera, or half press the shutter button...this is so much better, no more black shots wondering what happened. They are advertised to sync at 1/250th, this IS NOT THE CASE. I can only get up to 1/200 second without any black bars. With both the Pocketwizards and the cheap cowboy studio's I could get to 1/250th with no problems, this is the biggest downfall to these triggers. I've tried just the D7000 & the SB-700...still 1/200th, D700 & one SB-28...still 1/200th, very disappointing. Recommendation - unless you have $130 for one PocketWizard Plus III or $520 for four in my case these triggers are a great deal. They work consistently without any missed triggers up to 4 frames/second @ 1/16th power.

    Is this helpful? (0) (0)

  • By Schenke

    October 16, 2017

    I wish I had switched to this sooner. For such a small price, it provides so many functions, the other brand (especially like Pocket Wizard)should feel the pressure and shameful. Pro: 1. multiple useful functions: wireless flash trigger and shutter release. which could enable single person to accomplish complex photography job. 2. AA battery based!! ( looking for this feature for long time) 3. transmitter and receiver in one unit 4. 2.4 G wireless spectrum and long range possible ( 100 meter range not tested but most of in-door photography can be done) 5. additional hot shoe!! (looking for this feature for long time) 6. additional Sync port. 7. works great with my Nikon D700 and speedlight SB-700 and speedtron 2403 (with 102 head), Sync speed 1/250 has no issues. Cons: 1. No test button; it has to be fixed to the camera and flash and then can be tested to see the connection. For this, I deducted one star. I don't think it's an issue for me but it might be issue for other people relying on TTL. So I have to list it here: it does not support TTL. However for $ 32, that's very sufficient to accomplish most strobist work!! So far I love it.

    Is this helpful? (0) (0)

  • By Past My Prime

    August 15, 2017

    I ordered online Sunday evening and received them Friday evening. For a starter kit they are excellent. I have used Pocket Wizards with studio lighting but to just have these to use with my Nikon SB-600 flash they are excellent and do everything they are supposed to. I can actually turn them on and off while attached because I have smaller hands but can see why others may have to turn them on before mounting them. Nice to be able to trigger my camera as well from a farther distance than my Nikon ML-L3 allows because of its line of site limitations. I am investing in rechargeable AAA batteries now for my flash and RF-603. Much better than replacing hard to find batteries.

    Is this helpful? (0) (0)

  • By Erol

    July 17, 2017

    I have to say I was surprised by the high quality of these triggers. They sync unto 250th of a second but at that speed, there is a tiny bit of shutter cutoff at the bottom. On complete white backgounds it almost looks like I gobo'd the light to fall off at the very bottom of the frame. In most cases this works great. On horizontal shots I use this as a "feature" sometimes.. On vertical shots it needs to be cropped post production since it is only on one side. On a dark background it is not an issue. If I don't want this shadow and I don't want to crop the frame later, my max sync speed is 200th of a second. Flashes have to be in manual mode, no TTL here... Range is as advertised. I can trigger flashes that are not in line of sight. I use these only when CLS infrared would be an issue. Otherwise I keep these as backup and use my su-800. Lastly, these function as a remote trigger on my d7000. I already have the dedicated Nikon remote, but that only works with line of sight and close range and it has trouble focusing unless I set the camera to auto continuous focus mode. If I forget, the the pictures are all out of focus. And with the dedicated remote, I have to move the shutter mode to remote. Using these yongnuo triggers as a remote, all those limitations disappear. I can use it with all camera settings from any angle. Focus is perfect and I don't have to switch camera settings before and after I use the remote. By the way, they still fire your flashes while using as a remote. I purchased 2 sets. I can use 3 flashes or if I need to be in the picture, I use 2 flashes and I use the 4th receiver to trigger the shutter. I love the simplicity. They all can be used as a receiver or transmitter. That's great. I use mine with rechargeable aaa batteries with no problems. On the negative side, these don't lock on the light stands or the camera. It is a nice fit, so the one on the camera does not really need a lock. But I would feel better if these locked when using them on light stands. If the umbrella is facing down, you need to use a flash mount that locks the flash in place. I use the flash stands that came with the flashes so I noticed this as a potential issue although my flashes did not slip yet... I recommend these if you are looking for a simple wireless solution. I hope this helps.

    Is this helpful? (0) (0)

  • By 0150r

    July 17, 2017

    Extremely happy with this product. I bought two sets of these to go with my camera and three flashes. I really like that these are transceivers as I lost the transmitter on a previous version which ended my shooting. They are extremely reliable for the price. One of the best features is that you can remotely trigger your camera with the included cable. It works far better than the cheap IR remote that I have because it reliably works outdoors at a distance (the sun effects the IR) and you can half press to focus. What keeps these from being perfect? They only sync up to 1/160 shutter speed. 1/200 gets a small black band and 1/250 is about a third of the image. I was expecting to get 1/200 and would have been happy to get 1/200. The only other negative is the location of the on/off switch is difficult to get to once mounted to your flash. Pros: Transceivers (not separate transmitter and receiver) Reliable (can be a problem with other knock-off triggers) Can use as a remote shutter release, including half press to focus Inexpensive Cons: Slow sync speed Location of the on/off switch

    Is this helpful? (0) (0)

  • By Josh N.

    June 26, 2017

    After reading a lot of reviews on these triggers I decided to dive in and buy a couple sets. They're fantastic. I've had no issues with them and they function better than I thought they would, based on the price. I didn't give much thought to the ability to use it as a remote shutter release, but after using it to activate the camera a few times I decided to buy a third set (one transceiver for each of my three flashes, one on the camera, one to fire everything and one as a backup -- it will end up on my ring-mount flash when I get it next month). I was concerned about losing significant flash-sync speed by using a low-cost wireless set up, but I haven't lost much shutter speed. I tested my flash-sync speed on my Nikon D5000 and D40 wirelessly connected a Nikon sb-24, Nikon sb-28dx and a Yongnuo YN560II. The effective sync speed on my D5000 was 1/180 sec, but my D40 kept it's ridiculously fast 1/500 sec flash-sync speed. The units aren't perfect though. The power switch isn't in the most convenient place. You really do have to dismount the flash to turn them off, it's annoying but it shouldn't be a deal breaker. There also isn't a lock on the shoe mount, but they've fit tightly in every mount I've put them in. I don't have any concerns about them falling out on there own. The hot show also isn't a perfect fit with the YN560II, but it feels fine when the flash is locked in. Long story short, if you don't have the money for Pocket Wizards, or similar brands, but you want a good wireless trigger; buy these.

    Is this helpful? (0) (0)

  • By Emad

    June 4, 2017

    Hello I have nikon D7000, i bought 2 kits of this wireless flash triggers, they are so nice, the device is a transceiver, so every device can act as a wireless flash and a remote trigger for your camera, it takes x2 AAA batteries, i have the genuine Nikon remote shutter release remote ML-L3, and this is 100% greater and better than it, 1- it uses radio waives vs infrared fro the ML-13. so no need to have a line on site between you and the camera body. 2- the shutter release button on the transceiver has two pushing levels. precise just like the shutter release button on the camera body, the first pushing level will focus your camera lens on the object and the 2nd pushing level will fire the trigger, VS the ML-L3 has single touch button which will focus and fire the trigger on 1 click,which might be annoying sometimes This is 100% worth its price,and i recommend it, Emad Alwari

    Is this helpful? (0) (0)

  • By R. Harris

    May 18, 2017

    I'm using a now-ancient D70 that I've had for 6 years now. 1. I routinely sync at 250. I get a misfire once in a while... maybe 5% of the time. I tried it at 500 at it seemed to sync fine. But I didn't do it enough to get reliability numbers. 2. The switches are a non-issue. I'm using an old, $15 eBay flash but so far I can turn them on and off without issue. I'm pretty impressed with the status lights and build quality for the price. It doesn't feel like junk. It doesn't feel pro either. But if you're getting your feet wet with off-camera flash, this is a great $32. In fact, you'll start realizing that it wasn't flash that sucked all these years, it was the placement of that flash in relation to the subject and lens axis that caused your crappy photos.

    Is this helpful? (0) (0)

  • By John Moran

    April 7, 2017

    The shipment arrived within days, not the estimated month. One of these RF-603N-II triggers transmitted and manually triggered properly with other Yongnuo RF 603N flash triggers and the pair of YN-560-III speedlights; one trigger seemed to fail out of the box due to an internal circuit error. I later discovered that although I had tried to verify channel dip switch settings before posting a review, that the non-working trigger was set to Channel 16, while the working trigger was set to Channel 1. Both triggers work OK now on Channel 1 with all the dip switches aligned in the proper rows and with my eyes uncrossed. These model II transceivers are intended by me for experimental use on a Sony Alpha A57 camera body, but the needed shoe mount adapter has not yet arrived. So I dug out an old film camera (Minolta Hi-Matic 9) with internal leaf shutter x-flash synching ability to 1/500 sec. With camera back open, this the flash obviously synched well through the lens at 1/125 sec, and to a lesser brightness at 1/500 second.

    Is this helpful? (0) (0)

  • By M Y

    March 21, 2017

    Years ago I had a set of Yongnuo RF-602 triggers, which were some of the most popular radio triggers back in the day. Those were very reliable, and I don't recall ever having a misfire. These are the same in terms of reliability, but they fixed all of the RF602's problems. The RF602s had a separate transmitter/receiver, whereas on these, a single unit can act as either a transmitter or a receiver simply by flipping a switch. Speaking of the switch, the power switch is conveniently located on the side of the RF603IIs, whereas on the RF602 they were located on top and would be blocked if you had a flash in the hot-shoe of the triggers. Even the remote control cables are easier to attach on the RF603IIs. On the old RF602s you had to screw one end of the cable into the trigger, whereas on the 603IIs it's a simple matter of plugging in a 2.5mm jack. The RF602 required different battery sizes for the transmitter and receiver, and I'm glad to see that Yongnuo has gone with standardized AAA batteries on the RF603IIs. Lastly (and perhaps most importantly), the RF603IIs have a metal hot-shoe, which really increases durability compared to the flimsy plastic shoe found on the 602. The 603IIs also have a locking wheel on the hot-shoe, which was a big omission from the RF602.

    Is this helpful? (0) (0)

  • By Tim R Stacks

    February 21, 2017

    I purchased the RF-603 II-N3 flash trigger system to use with my two Yongnuo YN 560 III speedlights. These speedlights are non-TTL, so triggering was all I needed. This system comes with two identical units where one can be mounted to the camera and acts as the trigger; the other can be mounted to your off-camera flash and acts as a receiver. However, since my two speedlights are wireless, only one transceiver is needed to trigger both speedlights, which is really nice. I bought this for the Nikon camera system, but was really looking for something to use on my Sony A6000. The build quality is nice and it doesn’t feel or look cheap in my opinion. I tried it first on a Nikon D3100 and it fired right away. When I put it on the Sony A6000, it did not fire. I had read some other reviews about some difficulties people have had with using these on Sony cameras, including have to make modifications to the earlier models of this trigger to get it to work. I didn’t really want to do that, so I tried repositioning the trigger in the Sony hot shoe, or as Sony calls it, "multi-port." I first tried pushing it forward as far as it would go and it did not work. However, when I backed it out a little (somewhere between 1/64 to 1/8 inch, I’d guess), it worked like a charm and the flash fired. Evidently, the electrical contacts between the trigger and Sony’s multi-port do not align if the trigger is pushed all of the way in to the multi-port. I took it on location the next day. I mounted the trigger onto the A6000 and it again took me two or three tries before I found the sweet spot again. I locked the trigger down by tightening the plastic locking ring onto the camera, and shot for about three hours straight with it. It never budged or misfired. I am extremely happy with it! I’m giving this 5-stars, and I don’t blame Yongnuo for the electrical contacts not aligning up with Sony's multi-port. After all, I bought this for my Nikon and it works perfectly on that camera.

    Is this helpful? (0) (0)

  • By D***I

    January 27, 2017

    These are fairly well built and worked great when I tested them with my Nikon D5100 and Sunpak off camera flash. It really is only lacking a locking ring on the hot shoe foot. After a little more testing, I'll probably be ordering a second pair. Update: I now have 2 sets of these (4 total) and am using them with an older Sunpak 544 flash and a new Metz AF-1 52. 1 on each flash, one on the camera as a remote shutter release and hand hold the 4th as a remote trigger so I can walk around and shoot from anywhere in the room. The system works well, with only the occasional misfire. I have found that although my camera has a max flash sync speed of 1/200th, I can only shoot at a max of 1/160th with these triggers without having a slight dark band at the bottom of my photos. I imagine this is because of a slight delay from the radio triggers. it hasn't been an issue for the way i shoot, but it's worth mentioning I think. I have been very pleased with the battery life on these units. I have shot well over 300 shots in a session using AAA rechargeable batteries without exhausting them to the point where they won't fire. The unit I use for triggering(transmitter) does deplete faster than the units that are receiving only for obvious reasons. From my battery charger readings after a shoot, I'd guess the receivers could easily go at least 500 fires before the batteries were exhausted. I'm still very satisfied with the triggers, especially at this price.

    Is this helpful? (0) (0)

  • By escape

    November 13, 2016

    When I set these up according to the owner's manual (the trigger on the camera in TX mode, the trigger on a remote flash in TRX mode), it wouldn't work. The remote flash would not fire. I kept tinkering with it and finally got the remote flash to fire when I put both triggers in TRX mode. When I contacted Yongnuo support about it, they stated that my camera (D5200) is not officially supported with these triggers, so they don't know if it's compatible. That's a bit weird considering that D5200 is clearly listed in the product description title on , but maybe that's Amazon's fault and not Yongnuo's. Also, I've seen others report that these triggers work fine with their D5200, so maybe the triggers I received are somehow defective? Other than that, they do get the job done and are reasonably priced. UDPATE 11/23/2015: I just obtained another set of these triggers. These ones are version 1.2. The prior version which I reviewed last week were version 1.0. V1.2 actually function as described in the owner's manual (one set to TX and the other set to TRX mode). Not exactly sure if there are any other differences between the two versions.

    Is this helpful? (0) (0)

Meilleures ventes Plus

Veuillez activer votre e-mail d'inscription. Si non reçu cliquez sur le bouton ci-dessous

Récemment Vu

NOTRE SITE RUNS OF COOKIES

TOMTOP utilise des cookies pour vous offrir la meilleure expérience d'achat. Si vous continuez à utiliser nos services ou à créer un nouveau compte, nous supposerons que vous acceptez notre Politique de Confidentialité.