Passez la souris pour zoomer

Compteur horaire numérique de Docooler Compteur horaire inductif d'affichage à cristaux liquides

Compteur horaire numérique de Docooler Compteur horaire inductif d'affichage à cristaux liquides

pour le moteur à essence emballant la saleté de motocyclette ATV de moto de motocyclette de VTT de moto imperméable 0.1 / 99999Hrs

Prix uniquement sur l'application:

Vous avez déjà TOMTOP APP

Scannez le code du produit à acheter directement!

N'a pas de TOMTOP APP

Téléchargez et profitez d'offres supplémentaires!

De expédition:
  • Entrepôt de Chine
Veuillez sélectionner un entrepôt
livraison:
Habituellement expédié en jours ouvrables heures
livrer:
La demande a échoué! Veuillez réessayer.
Désolé, il semble qu'il n'y a pas de méthodes de livraison disponibles pour votre emplacement.S'il vous pla?t Contactez nous Pour plus d'aide.

Chargement...

Envoyer

United States
Stock dans: china

couleur:

Veuillez sélectionner un couleur
Quantité:

Chaque utilisateur ne peut acheter que des 5 Pièce

Special discount has ended

Please note each user for only 1 item(s)

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!

Email:

Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice

Protection d'acheteur

  • Remboursement intégralSi vous ne recevez pas votre commande
  • Remboursement complet ou partiel , Si l'article n'est pas comme décrit Apprendre encore plus >
Caractéristiques:
Convient pour tous les moteurs à essence.
Grand écran LCD pour une lecture facile.
Conception inductive: Vous avez juste besoin d'enrouler le fil autour des bougies.
Alimenté par des batteries intégrées (durée de vie: environ 3 ans).
Installation simple et étanche.
Utilisé pour enregistrer le temps de fonctionnement des moteurs.

Caractéristiques:
La couleur verte
Matériel: ABS
Lecture: 99999 heures
Précision: 0.1HRS
Grade imperméable à l'eau: IP68
Puissance: 1 * CR2450 batterie
Autonomie de la batterie: 3 ans
Longueur de fil: 110cm / 43in
Taille de compteur horaire: 5.4 * 3.7 * 1.5cm / 2.1 * 1.5 * 0.6in
Poids du produit: 36g / 1.3oz
Taille de l'emballage: 17.5 * 10 * 1.7 cm / 6.9 * 3.9 * 0.7in
Poids du paquet: 65g / 2.2oz

Forfait comprenant:
1 * Compteur horaire
1 * fil
2 * vis

Domande e risposte dei clienti

Trier:
0
Q

Will this work on a mower? Timemaster?

A
  • Yes...refer to the two previous answers as they are correct.

    By J. FORD on May 11, 2018

(3)
0
Q

Can you shorten the length of the cable by cutting off extra

A
  • Yes

    By hathewaya on April 16, 2018

(2)
0
Q

will this work on a 150 4-stroke outboard motor?

A
  • It should work fine on that motor.

    By Michael McGuire on April 12, 2018

(3)
0
Q

i have the wire wrapped around the spark plug wire 5 or so times but still doesnt work. Any ideas?

A
  • Make sure the wrapping is tight. Also, assure that the wire is fully seated in the length of the channel in the hour meter. Good luck!

    By Ken Costello on April 5, 2018

0
Q

I want to mount on my console and not run a wire to the rear. can i connect this to the key? so it works when i turn on the key.

A
  • The unit has its own internal battery, the only wire is for the spark plug sense. It will not work without the one wire installed

    By Sean M on April 8, 2018

(3)
0
Q

Does this read accurate rpm for 1, 2, 3, 4, cylinder engines?

A
  • This is an hour meter, I don't think it reads rpm.

    By Coleman Farrar on February 15, 2018

(1)
0
Q

How long is the wire included and are you able to add wire to the unit to make it longer ?

A
  • The wire that's attached is about 4' long. You should be able to solder on another piece of wire, just make sure that it's similar gauge wire.

    By Greg S. in MD on January 28, 2018

0
Q

I was told this helps increase speed and performance is that true

A
  • All this does is record minutes while running, nothing to do with performance.

    By JW on January 21, 2018

(4)
0
Q

I just installed one of these. Any idea how long the battery lasts in them? I hope at least a couple yrs. I put it on a snow blower thats idle 3-6 mo

A
  • About 2 years.

    By Mikhail G. on January 9, 2018

(2)
0
Q

What is the voltage on this? is it 12v like a car battery or do the ymake one that is 120v?

A
  • The hour meter has a built in battery no external wiring required. I have installed 3 of these on equipment and they work fine. Just wrap the wire lead around a spark plug wire as per directions, secure the meter and you are good to go.

    By Tony on December 16, 2017

(2)

Discussions

Répondez au sujet

Notez que TOMTOP Forum est une communauté pour l'échange d'idées et la recherche d'aide, au cours de laquelle les enthousiastes technologiques participeront à la discussion. Pendant ce temps, le service à la clientèle TOMTOP (avec l'icône Tomtop Customer Service) répondra en temps opportun, avec la même fonction que le contact sur http : //www.tomtop.com/contacts

ouvrez ce forum en pleine page
Avis des clients

Note moyenne:

4.1

basé sur 279 Avis des clients

  • 5 Étoiles
    3%
  • 4 Étoiles
    95%
  • 3 Étoiles
    2%
  • 2 Étoiles
  • 1 Étoiles

Partagez votre opinion avec les autres clients et obtenir des points Tomtop, les 5 premiers examens obtiennent le double de points Tomtop!

Écrire un avis de client
  • By Ryan Lester

    September 21, 2017

    Bought this for a Predator 212. It screwed right into the airbox without a drill. and I coiled it around the spark plug 7 times so it would register. My wire was roughly 4 feet long. It works as it should. There is a battery on these things and only time will tell how long it lasts. The thing is sealed so either you will have to break it open to swap the battery or buy a new one. But if it were to not be sealed then it wouldnt be waterproof so nobody can really find one thats waterproof and not sealed. But overall I do recommend this product

    Is this helpful? (0) (0)

  • By Online Shopper

    August 20, 2017

    Purchased for my Honda eu2000i generator (that does not come with an hour meter). Five wraps around the spark plug wire starting at the boot and easy to fish the wire thru to the meter mounted (via provided screws) to the top of the case near the handle. Cut away the excess wire that was not needed and it starting working when the generator was started. Measures tenths (one 10th = 6 minutes) and whole hours. This is needed to track when to change the oil. Only likely issue will be the non-replaceable battery.......when it runs out, time to buy another one. Unsure how long battery will last.

    Is this helpful? (0) (0)

  • By Benjamin B.

    August 16, 2017

    It works. Instructions didn't mention where to put the other end of the wire, but it's pretty obvious I guess (in the slot of the meter's case). Meter display remains on at all times, the little hour-glass blinks when the motor is operating (if you wired it correctly and it's not broken). It remains to be seen how long it'll last being on all the time like it is, but as long as I write down the time every couple weeks or so I should be fine even if it dies. For a few bucks, it's not bad. For installing the wire, I zip-tied one end parallel to the plug wire, made a 90-degree bend and wrapped it tight exactly 5 times (ending on the same side of the plug wire that I started on), made another 90-degree bend to get parallel again, then zip-tie tight so the coil doesn't get loose. Would have also put heat-shrink on at this point, but didn't have any big enough to fit over the boot that could also shrink to fit the wire. After installing the coil, I simply routed the wire around the motor shroud, installed the meter on the wire where I wanted it mounted, then stuck it in place with some heavy-duty scotch 3m fasteners.

    Is this helpful? (0) (0)

  • By Joseph

    August 4, 2017

    Bought this to track the hours on my Crraftsman R1000 lawn tractor. Works great. I used double sided 3M outdoor tape to attach it on a recessed area near the oil cap. Just a few minor things to be aware of; I needed to remove many parts from around the engine to get at the spark plug wire. Not a fault of the meter. Just the nature of the design on this particular mower. When I finally got to the plug wire, I wrapped the sensor wire 5 times around the spark plug wire approximately 3/4" from the boot. I tie wrapped everything securely and routed the sensor wire up to an opening near where I planned on mounting the meter. I ended up with about 6" of extra wire length, so I snipped that off to keep everything neat. The instructions are not clear on how the wire inserts into the meter. I ran the wire the full length of the meter and forced it all the way into the base pf the slot. Also be aware that although the instructions refer to double sided tape, there is none provided. They do give you two small self tapping screws which you could use if you wanted to drill a couple of holes. The meter is very light in weight, therefore I used my own double sided tape to securely attach the meter, without using the screws. One other minor thing, again not a fault of the meter, is the red color. From the picture, I thought it would match the red panels on my mower. This isn't the case. If I knew there would be such a noticeable difference in color, I would have ordered black. But that's just me being OCD! All in all, the meter does the job, and I feel it is well worth the money.

    Is this helpful? (0) (0)

  • By Marjorie W. Dunaway

    October 3, 2016

    by Marjorie's hubby: I bought 2 of these to put on my snow blower and generator to track usage. Finally got round to installing one on the snow blower. The concept is simple but my snow blower engine is encased in several shrouds and it was tough to access the spark plug cable. Once I got there and managed to get the 5 wraps on, things were simple. BUT for a few moments I was uncertain how to install the wire on the unit - it is simple, just tuck the wire in the slot along the base of the unit. A little more instructions on the card would help. I held back a star as I've only had it installed for 2 days - but I like it a lot - hope it is durable. I was surprised that it recorded I'd run the machine for 2 hrs already. Now I hope to be more prompt and diligent in oil changes. I expect it will pay off in better maintenance and longer life of the engine. Now to install on the generator which also has a deeply buried spark plug..

    Is this helpful? (0) (0)

  • By Mark Nakamura

    August 22, 2016

    Hooked this up to my new Yamaha EF1000 generator and it works great. Easy to install (just wrap one end of the included wire around the spark plug wire close to the plug and stick the other end into the slot on the meter. It comes with two screws to attach it but I used double sided tape and placed it on top of the generator spark plug access hatch. Good price (half that of the Yamaha branded version) and seems to be working just fine. It has an internal non-replaceable battery and I am not sure how long it will last, but for the price if I get 2 or 3 years use out of it I will be happy.

    Is this helpful? (0) (0)

  • By Mr.Plow9

    August 18, 2016

    It works. Wish you could change the battery when it goes dead. I installed this on my generator. It reads in tenths. So .5 is 30 minutes, 1.0 is 60 minutes, 1.5 is 90 minutes and so on. Hook up was easy. Just wrapped the wire around the end of the spark plug wire, as close to the spark plug as I could, 5 times. Instructions are vague. The wire needs to be inserted the full length of the slit in the back of the meter. Does not explain this in the bad directions. If I could change the battery, this would be 5 stars. Overall I'd buy this again and recommend it to others.

    Is this helpful? (0) (0)

  • By S.Allison

    December 1, 2017

    Tracking maintenance on my generator is easy with this hour meter. Took less than 5 minutes to install. Like other reviewers, I wish the battery was replaceable - I'm deducting 1 star for that.

    Is this helpful? (0) (0)

  • By Ritzville Jerry

    July 31, 2017

    I like it. It doesn't even require a battery. Rap the sensing wire five times around the spark plug wire and you are done. That's it. It can be tie-rapped onto your motor or can be screwed onto the case. I am using it on my new generator. I checked it for 45 minutes and it was right on.

    Is this helpful? (0) (0)

  • By b***n

    September 6, 2015

    Super

    Is this helpful? (0) (0)

  • By t***r

    April 16, 2015

    Alles gut gelaufen und auch mega schnell.

    Is this helpful? (0) (0)

  • By w***l

    March 18, 2015

    Quick Shipping - Easy Transaction - Thanks!

    Is this helpful? (0) (0)

  • By s***h

    March 5, 2015

    danke alles bestens!

    Is this helpful? (0) (0)

  • By w***y

    February 23, 2015

    Alles OK / Keine Probleme / Guter Preis / Vielen Dank

    Is this helpful? (0) (0)

  • By s***s

    February 14, 2015

    Thanks!

    Is this helpful? (0) (0)

  • By d***s

    February 3, 2015

    wunderbar

    Is this helpful? (0) (0)

  • By r***1

    January 24, 2015

    super

    Is this helpful? (0) (0)

  • By d***h

    January 3, 2015

    Item as described. Quick delivery. Recommend. *****

    Is this helpful? (0) (0)

  • By m***1

    December 19, 2014

    Tolles Teil, jetzt muss es nur noch Zählen ...

    Is this helpful? (0) (0)

  • By r***g

    December 12, 2014

    very good

    Is this helpful? (0) (0)

Meilleures ventes Plus

Veuillez activer votre e-mail d'inscription. Si non reçu cliquez sur le bouton ci-dessous

Récemment Vu

NOTRE SITE RUNS OF COOKIES

TOMTOP utilise des cookies pour vous offrir la meilleure expérience d'achat. Si vous continuez à utiliser nos services ou à créer un nouveau compte, nous supposerons que vous acceptez notre Politique de Confidentialité.

Soumettre des commentaires

Click the refresh verification code