Este módulo puede detectar corriente continua en el intervalo de 0-10A, la precisión es 0.01A.
Caracteristicas:
La detección de rango: DC 0 ~ 10A; Precisión: 0,01 A (10 mA).
Detectar la corriente para controlar el relé de entonces controlar el circuito de encendido / apagado.
Establecer el tiempo de retardo para evitar el choque de salida con el fin de proteger el circuito.
Con la función de calibración de error.
Puede apagar la pantalla LED para reducir el consumo de energía.
Funciones Descripción:
P-1: Exceso de corriente de detección: cuando la corriente de detección <I1(low limit setting), the relay closes; > I2 (ajuste del límite de altura), se abre el relé.
P-2: Bajo corriente de detección: cuando la corriente> I2 detección, el relé se cierra; <I1, the relay opens.
P-3: Close in the Range: when the detecting current is between I1 and I2, the relay closes; relay opens in other situation.
P-4: Open in the Range: when the detecting current is between I1 and I2, the relay opens; relay closes in other situation.
P-5: Error Calibration and Delay Time Setting: the relay would not operate.
Buttons Description:
K1: Modes Selection;
K2: "+"
K3: "-"
Long press K1 for 2s into modes selection; short press K1 to select function and K2 to enter the mode.
Note:
After power on, the LED digits would pulse if the detecting current terminal is none.
Specifications:
Voltage: DC 12V
Detecting Range: DC 0~10A
Accuracy: 0.01A(10mA)
Standby Current: Approx. 20mA
Display: LED Digital Display
Item Size: 65 * 40 * 18mm
Package Weight: 29g / 1.04oz
Package List:
1 * DC Current Detection Module