Questo modulo può rilevare corrente continua nella gamma di 0-10A, la precisione è 0.01A.
Caratteristiche:
campo di rilevamento: DC 0 ~ 10A; Precisione: 0.01A (10mA).
Rilevare la corrente per controllare il relè quindi controllare il circuito on / off.
Impostare tempo di ritardo per evitare urti uscita in modo da proteggere il circuito.
Con la funzione di calibrazione errore.
Possibile spegnere il display a LED per ridurre il consumo energetico.
Funzioni Descrizione:
P-1: Sovracorrente di rilevamento: quando la corrente di rilevamento <I1(low limit setting), the relay closes; > I2 (impostazione del limite di altezza), si apre il relè.
P-2: Under-corrente di rilevamento: quando il rilevamento della corrente> I2, il relè si chiude; <I1, the relay opens.
P-3: Close in the Range: when the detecting current is between I1 and I2, the relay closes; relay opens in other situation.
P-4: Open in the Range: when the detecting current is between I1 and I2, the relay opens; relay closes in other situation.
P-5: Error Calibration and Delay Time Setting: the relay would not operate.
Buttons Description:
K1: Modes Selection;
K2: "+"
K3: "-"
Long press K1 for 2s into modes selection; short press K1 to select function and K2 to enter the mode.
Note:
After power on, the LED digits would pulse if the detecting current terminal is none.
Specifications:
Voltage: DC 12V
Detecting Range: DC 0~10A
Accuracy: 0.01A(10mA)
Standby Current: Approx. 20mA
Display: LED Digital Display
Item Size: 65 * 40 * 18mm
Package Weight: 29g / 1.04oz
Package List:
1 * DC Current Detection Module