Precio únicamente en la APP.:
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Preguntas y respuestas
I wouldn't even bother send it back
By mdr1 on May 11, 2018
By Francy on May 11, 2018
Negative I think.
By Amazon Customer on April 19, 2018
should work used it on a 96 Dodge Neon without a problem. just had to view a few youtube vids for which wires to hook up too.
By Mark Jordan on April 3, 2018
So has with a truck or car,, you have the 12 volt coil which is needed for a tack.. Now you also need a ignition power on lead.. So when you turn on the key the tack powers up.. So here this tack has 4 wires. 2 for + - lead on tack,, the other to a power AC on and negative to battery... Hope I did my best to explain… see more So has with a truck or car,, you have the 12 volt coil which is needed for a tack.. Now you also need a ignition power on lead.. So when you turn on the key the tack powers up.. So here this tack has 4 wires. 2 for + - lead on tack,, the other to a power AC on and negative to battery... Hope I did my best to explain ,, I like this tack ,, great price small,, and shoot it lights up even.. be safe and good luck see less
By happy customer.. on January 23, 2018
By David Hickey on December 21, 2017
Red to anything that has power. Black ground. I put green to ignition module I think
By devon on December 18, 2017
Yes it uses the coil as source of reference.
By David Hickey on November 12, 2017
Los foros de TOMTOP son una comunidad para comunicarse y ayudarse mutuamente. Habrá amigos entusiastas participando en tus discusiones. Desde luego, la respuesta del servicio de atención a clientes de TOMTOP (con el ícono de servicio de atención a clientes de TOMTOP) está garantizada que es la misma vía por la cual no contactarías en http://www.tomtop.com/contactsabrir este foro en página completa
Basado en 114 Reseñas de clientes
Comparte tu opinión con otros clientes y obtén puntos Tomtop, las primeras 5 reseñas obtienen el DOBLE de puntos TomtopEscribir una reseña
By Dave H
November 22, 2017
Nice little tach for the money. I felt that the instructions were lacking quite a bit, but I was able to figure it out. There are two long red and black wires - these provide power. The red should be hooked to a 'key hot' wire. There are two shorter red and black wires - these are for the backlight. The red wire here should be hooked to a wire that gets hot when the parking lights are turned on. Finally the long green wire needs to be hooked to the signal for the distributor. For my Chevy HEI ignition, this was a wire directly to the distributor cap. The response of the needle is nice and smooth, not choppy or jittery. The backlight is a very bright blue. The bezel is just ok, the holes in the back of it for the wires to pass through are on the wrong side for how I have it mounted (base down to the top of my dash). This seems wierd to me, the wires come out of the top of the tach itself when oriented upright. Didn't seem to cause any problems though.
November 16, 2017
The tach works good really good but the back light is way to bright even when hooked into the factory dimmer switch instalation was about 3 hours because instructions where limited and resorces online for my specific vehicle where limited when trying to find schematics for my factory dimmer switch and like many have stated the back light is wayyyyy to bright they would of been better off using a regular dash bulb for this thing think im just gonna cut the back light wires and leave it as a none back lite tach over all for the price of this thing its definitly worth it
By John L
November 15, 2017
Gauge worked on the first try, ran the green wire to tach output off the coil on a 350 TBI. It won't read any rpm until the engine is actually running, not sure if that's my truck or the gauge.. But it seems to react reasonably quick and read accurately. The gauge pod is very cheap though and mine was missing the back side of the nut, so I had to drill it out and make a new nut/bolt... But still a cheap way to add a tach to a truck. Update, now that i wired the LED backlight, it is WAY too bright for nightime use, I wish there was a way to dim the backlight some, I wired mine to a switch so I can turn it on and off. Also you can combine the two black negative leads (one for the tach and one for the LED) at the same spot, works fine and makes wiring a bit easier
February 2, 2018
By Chad Nicholls
November 14, 2017
December 22, 2015
December 17, 2015
September 30, 2015
September 28, 2015
September 25, 2015
September 8, 2015
September 7, 2015
August 27, 2015
August 26, 2015
April 20, 2015
April 9, 2015
February 11, 2015
January 30, 2015
January 28, 2015
January 22, 2015
Evento popular Más
Lo más vendido Más
Tu pregunta ha sido correctamente enviada
Por favor activa tu cuenta para comprar, de ser necesario, volveremos a enviar un correo para completar el registro.
NUESTRO SITIO CORREDOR DE COOKIES