Мышку вверх для увеличения

Высокая точность цифровой ДДС двухканальный источник сигнала Генератор сигналов произвольной формы измеритель частоты 200MSa / с 25МГц

Высокая точность цифровой ДДС двухканальный источник сигнала Генератор сигналов произвольной формы измеритель частоты 200MSa / с 25МГц

Цена только в приложении:

Уже есть приложение TOMTOP APP

Отсканируй код товара для покупки напрямую!

Примечание. Обновите приложение TOMTOP до последней версии.

Нет приложения TOMTOP

Скачайте бесплатно и получите больше предложений!

Доставка из:
  • Склад в Китае
  • Склад в США
Выберите склад
Отправка:
Обычно будет отправлено в абочие дни часов
Доставка:
Ошибка запроса! Пожалуйста, попробуйте еще раз.
Извините, похоже, нет доступных способов доставки для вашего местоположения.Пожалуйста Свяжитесь с нами Для дальнейшей помощи.

Загрузка...

Доставка в

United States
Запасы в: china

штекер:

  • ес
  • нас
Выберите штекер

мгц:

  • 6
  • 25
  • 12
Выберите мгц
Кол-во:

Каждый пользователь может приобрести только 5 пункт

Special discount has ended

Please note each user for only 1 item(s)

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!

Email:

Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice

Защита Покупателя

  • Полное возмещениеЕсли вы не получили свой заказ
  • Полный или частичный возврат , Если элемент не соответствует описанию Выучить больше >
Генератор сигналов произвольной формы сигнала DDS из серии MHS-5200A многофункциональный генератор сигнала с высокой точностью и высокой производительностью. Он принимает большие масштабы FPGA интегральных схем, высокоскоростной MCU микропроцессор и SMT во внутренней цепи, которые могут значительно улучшить анти-помех и срок службы инструмента. ЖК-дисплей делится на две строки: верхняя строка показывает текущую частоту и следующая строка отображает дополнительные параметры или функции. Этот инструмент имеет большое преимущество при формировании сигнала, сканирование сигнала, параметры измерения и т.д. Это идеальное тестирование или измерительный прибор для электроники, инженер электронной лаборатории, обучения и исследования.

Особенности:
Можно выводить произвольные формы сигнала и обычные функциональные формы сигналов (синус / треугольник / квадрат / пилообразной волны и сигнал TTL).
Все функции с цифровым управлением, точным и стабильным.
выход Двухканальный, может работать синхронно, разность фаз регулируется.
С помощью линейной развертки (макс. До 999 сек) и логарифмические функции частоты развертки.
Сигнал обоих каналов имеет встроенный в сложных -20дБ аттенюатор для того, чтобы достичь минимального разрешения амплитуды 1mV.
С 120% ~ + 120% Функция смещения постоянного тока.
4 Выход TTL (разность фаз регулируется).
Имеет измерения частоты, периода измерения, положительные и отрицательные измерения длительности импульса, измерения рабочего цикла и функцию подсчета.
С помощью интерфейса USB, после соединения с ПК, компьютер может быть использован для управления прибором.

Характеристики:
Проект Параметры
Ключевая особенность Диапазон частот Синусоидальная волна

Нормальные режимы (по желанию): 0,01 Гц ~ 6 МГц / 0,01 Гц ~ 12 МГц / 0,01 Гц ~ 20 МГц / 0,01 Гц ~ 25MHz

Square Wave 0,01 Гц ~ 6MHz
Треугольник Wave 0,01 Гц ~ 6MHz
Зубцевидная волна 0,01 Гц ~ 6MHz
Сигналов произвольной формы 0,01 Гц ~ 6MHz
TTL Цифровой волны сигнала 0,01 Гц ~ 6MHz
Выходная модуляция Частота развертки
Типы осциллограмм Sine / Triangle / Квадрат / Подъемное пилообразной волны CMOS цифровой сигнальной волны и сигналов произвольной формы
Форма волны Длина 2048Points
Частота выборки 200MSa / s
Waveform Amplitude Разрешение 12 бит
Их в. Разрешение по частоте 10МГц
Частота ошибок +/- 5 * 10 ^ (- 6)
Стабильность частоты +/- 1 * 10 ^ (- 6)
Диапазон амплитуд (от пика до пика)

5mVp-р ~ 20Vp-р

Выходное сопротивление 50Ω (+/- 10%)
Amplitude Разрешение

1mVp-р (-20dB Затухание)

10mVp-р (Нет Затухание)

Смещение диапазона -120% ~ 120% (отношение напряжения смещения и амплитуды сигнала)
Уклон Разрешение 1%
Фаза Диапазон 0 ~ 359 °
Фаза Разрешение 1 °
Синусоидальная волна Harmonic Прибыл системы 40dBc (<1МГц); 35dBc (1MHz ~ 20MHz)
Искажение <0,8% (20Гц ~ 20кГц)
Square Wave Подъем вдоль времени ≤20ns
Перерегулирование ≤10%
Рабочий цикл Диапазон регулировки 0% ~ 99,9%
TTL Подъем вдоль времени ≤20ns
Низкий уровень <0.3V
Высокий уровень 1V ~ 7.5V
Сигналов произвольной формы Количество 16
Глубина памяти / Группа 1KB / 16
Сканирование Режим сканирования Линейная стреловидности, Log стреловидности
Время сканирования 1s-999Сек
Диапазон сканирования Она определяется настройкой параметров развертки
Внешние измерения Частота Диапазон измерения

GATE-TIME = 10S 0,1Гц - 60MHz

GATE-TIME = 1S 1Гц - 60MHz

GATE-TIME = 10Гц с шагом 0,1 - 60MHz

GATE-TIME = 0,01 с 100Hz - 60MHz

Диапазон входного напряжения

0.5Vp-р ~ 20Vp-р
Подсчет диапазона 0 ~ 4294967295
Подсчет Вручную
Положительный и отрицательный Ширина импульса измерения 10ns Разрешение, Макс. Отслеживаемые 10s
Периодическое измерение 20ns Разрешение, Макс. Отслеживаемые 20s
Рабочий цикл измерения 0,1% Разрешение, диапазон измерения от 0,1% ~ 99,9%
Выбор источника 1. Ext. IN вход (AC сигнал); 2. TTL-IN вход (Digital Signal)
Память Количество 10
Место нахождения M0 ~ M9
Интерфейс Режим интерфейса с помощью USB для последовательного интерфейса
Скорость передачи данных 57600bps
Протокол С помощью командной строки, соглашение Public
Источник питания ОКРУГ КОЛУМБИЯ MHS5200A DC 5V источник питания
Генеральная
Размер 19.5 * 17.5 * 7см / 7,67 * 6,9 * 2.75in
Вес 542g / 19.12oz
Размер посылки 24 * 21 * 9.5cm / 9,45 * 8,3 * 3.74in (L * W * H)
Вес упаковки 986g / 34.78oz

Список пакетов:
1 * источник сигнала генератор
1 * USB-кабель
1 * CD
1 * TTL плата расширения
2 * BNC зажимы кабель

Обсуждение

Создать новую тему

В ваших обсуждениях участвуют восторженные друзья. Конечно, обслуживание клиентов TOMTOP (с помощью значка обслуживания клиентов) гарантировано, так же, как вы можете связаться с нами по адресу http://www.tomtop.com/contacts

Открыть этот форум на полной странице
Отзывы клиентов

Средний рейтинг:

4.4

Основанный на 84 Отзывы клиентов

  • 5 Звезды
    26%
  • 4 Звезды
    74%
  • 3 Звезды
  • 2 Звезды
  • 1 Звезды

Поделитесь своими мыслями с другими клиентами и получите баллы TOMTOP. Первые 5 отзывов получают двойные баллы!

Написать отзыв
  • By AUgie the Prospector

    January 23, 2018

    All I've done is try out the built-in capabilities, just to be sure it wasn't DOA, and was a version with the advertised features. Everything works as expected. Any shortcomings in signal quality are minor and expected given the price point. I connected it to the Siglent SDS1102CML digital scope for these tests, and was reminded how easy that oscilloscope is to use as well. First, anyone interested in learning about this signal generator will find a lot more online about the model MHS-5200A, which appears to be the exact same unit, under a different name. There are reviews and upgrades, including fixing the over-bright display (a minor issue) and correcting some of the distortion in the sine wave output (how important this is depends on how spectrally pure an output you need). There is also some aftermarket software hobbyists have developed for uploading arbitrary waveforms, if the supplied software doesn't meet your needs. Some people have even managed to "close the loop" and download waveforms captured on their digital storage scopes (like the one I use) into their computer, edit them, and then upload them into the signal generator. This is way more than I need - I'll likely never attach it to a computer - but some users of this device will doubtless want to follow these brave hardware hackers' lead. A nice English manual is available from one of the serious hobbyist sites, and maybe other places too. It was written by an English-speaking hobbyist based on the Chinese manual and online sources - it covers all the basic internal functions with clarity. I don't like posting links, so just Google it yourself. Search for MHS5200.pdf. Follow a result on eevblog.com about reverse engineering the serial protocol, look at post number 18 and you'll see a link to the pdf file on github. It scans clean of malware and is very clearly written. However you find it, it will be useful. While I didn't have my scope analyze for spectral purity (see MHS-5200A YouTube videos for that), I did run the generator through its built in paces. As others have noted, the square wave begins losing its crispness much above 1 MHz, and is pretty "round" by the advertised 6 MHz. Sine waves look pretty good all the way to 25 MHz. Locking the two channels works, all the wave shapes work. Adjusting the duty factor of square waves works. Adjusting the relative phases of the two channels works. Sweeping the frequency works as advertised. The input frequency counter works in its various frequency, period, duty factor, etc., modes, including when feeding back one of the output channels into it, set up prior to moving to the signal input part of the menu. (Not that anyone with a modern digital oscilloscope needs this feature.) I didn't test the rear panel TTL inputs or outputs. I also didn't try saving a setup of the controls into one of the internal memories (probably works). Adjusting the amplitude works, but I forgot to try the offset - I'm sure it works too. I noticed that the square wave has a small "back porch" (slight drop in level near the trailing edge), even at low frequencies, but is within the range of expected signal impurities and would just about never be an issue. Amplitudes and frequencies agreed extremely well between the signal generator and my digital scope. Conclusion; This seems to be the exact same device as the more commonly discussed MHS-5200A, and all the features and functions that I tested work as expected (none involving a computer were tried). It is a great value for what it can do and has even more potential when interfaced to a computer, or if modified for greater spectral purity. Amazon seems to be selling, in the KKmoon, an MHS-5200A under a different name, for a very good price. I saw no issues with the build quality or construction of my unit. Finally, I didn't find the controls as hard to fathom as I expected. They can be a little slow to navigate, but with a few minutes use they seemed fairly natural and required no reference to the manual. The English manual did come in handy preventing a lot of guessing at a few points, so I do recommend it highly.

    Is this helpful? (0) (0)

  • By Radio Guy

    December 23, 2017

    This is an inexpensive signal generator that offers a lot for the low price. While expensive test gear will outperform this - for many uses this generator is really handy. Before I purchased this I checked out videos on you tube and was generally impressed with what you could do with an inexpensive piece of test gear. Some of the videos showed some ring on a square wave from the generator. The model I received did not have this problem so I suspect that the generator design may have been touched up to take care of this small issue. Overall the generator give the hobbyist a lot of capability. For my use it's been great.

    Is this helpful? (0) (0)

  • By S. Thompson

    September 15, 2017

    First thing I noticed It was easy to set, Its the easiest to set of My other frequency generators but that Is once You know how to set It, there was some things right out of the box but there were some things I would have Not been able to figure out, I had to go watch some videos to figure It out. To adjust the level at the top of the screen click the bottom left button then push the top right button and do It again to go to the bottom of the screen. To switch channels click the bottom left button then the top left button, To start click the bottom left button then the bottom right button, You must ad just the settings as the frequency before It will start, I thought I got a defective one because I did Not know that. The amplitude power output will Not go to zero volts It goes to from 00.20 volts to 13 volts but It will read 20 volts. Also for the program to work You must have a newer Microsoft Operating System It would Not work with My old Windows XP A quick history about Doctor: Rife cured 16 out of 16 People of cancer In 1934 using am radio frequencies waves through a plasma bulb, but a business partner tampered with the frequencies and They were selling machines that did Not work which gave big drug companies a chance to put Them out of business and In the 1950's Doctor: Crane wanted to reinvent the Rife machine but using Audio frequencies and Tens pads which did Not work as well as the original Rife machine. I bought this because I wanted a 3.3 MHz carrier wave for a Rife machine but I did Not know how easy It Is to adjust. This will work as a Doctor: Clark zapper or Croft zapper It has adjustable voltage up to 13 volts output though It will read 20 volts output the screen shows AMPL short for amplitude voltage that Is the voltage output adjustment. I do Not think It has enough voltage output for Tens pads or any Non metal connection, but It has enough voltage out put If used with metal as Copper or Stainless Steel, Using Copper handles I could feel the voltage at 6 volts and 12 volts I was getting a good zapping and what I always say If You can Not feel It shocking You the Its probably Not doing anything to the pathogens. Also Doctor: Clark said to use a positive offset, on screen says OFFS This can also be used as the frequency generator In the Rife/Doug coil machine, A Technician In a video said this has a ring In the Square wave and put In better parts but I do Not know how much that will effect It. The Spooky2 software program will Not work with this Generator, It did Not detect It, but years a go We were able to out smart that Internet virus company (You know that big company that puts their big genitals where It does Not belong and freezes up Your account for No understandable reason) and I bought a Spook2 generator but became frustrated trying to adjust the settings I tapped the screen with My finger It and broke the LCD screen but the Spooky2 program still recognised It and asked to look for more generators but I have Not tried It yet. Also the Spooky2 booster does Not fit this Generator but all It does Is link the 2 channels together and has a 103 resistor for making Colloidal Silver. It will Not work as a Doctor: Beck, Blood Electrification unit or a Tens machine, both Tens machines and the Blood Electrification unit Is around 50 volts AC output but the Blood Electrification unit Is set around 4 Hz and Is higher amperage than Tens machines, that Is why Tens machines are everywhere at low prices because they do Not have enough amperage to do anything a Tens machine will shock You but does Not even have enough amperage to light a LED bulb...........

    Is this helpful? (0) (0)

  • By Oldguy

    September 14, 2017

    Seems to be quite accurate, checked with my Digital Oscope. It comes with a piece of software for Windows. With the software, connected through USB to a Windows computer, it is a lot easier to set parameters. On the other hand, the computer has to be running for the software to be used, duh. Of course! There is however a flaw / bug in the device firmware during power on. At times when powered on, the display is corrupted and so are the control functions. Power off and on again has fixed it in the past. Otherwise, at the price to performance ratio, it is quite usable for some bench projects. I don't know why it sometimes doesn't initializes at first power on. From my own experience in programming micro controller, I guess there isn't enough delay to initialize the micro.

    Is this helpful? (0) (0)

  • By Mark T.

    September 12, 2017

    Hardware Great for the Price, but need to have better software sent with the Unit on the small disc. Missing main program and you have to read through all the reviews on this sight to get to the point you can program the unit via the USB cable. A bit shy on documentation but again reading through these reviews and you will be able to get by. It may not directly answer all your questions, but you will come away with enough to be able to use most all of its features. Again it is a very good unit for the price. So because of the poor / missing files I deducted 20% and could only offer 4 stars.

    Is this helpful? (0) (0)

  • By L. F. Lederer

    September 9, 2017

    It's darn good. The signals are crisp and clear on my analog scope. The amplitude settings seem dead on. The software is a big plus (must), making it very easy to setup and designing arbitrary waveforms which adds some flexibility to the unit. There is third party software available as well for developing your even more arbitrary waveforms. I also liked that you can output to both channels at the same time and with totally different waveforms and frequencies.It also came with a handy TTL interface that plugs into the back of the unit. As stated in an other review the 25 MHz model only puts out a sine wave at that frequency. All other waveforms are limited to around 6 MHz before they start to distort. And at 25 MHz they all looked like a sine wave. The frequency counter seems to work OK but I don't have a calibrated device to measure its accuracy. Three negatives. One the manual is definitely lacking clarity on the operation and functionality of the instrument. Two, the software on the CD was corrupted and it took me nearly a day to find their website, no thanks to the seller in helping me. It took three tries to download the 110 MB file and nearly two hours on the final try as their download speed averaged about 350 kbps (sic). Three, selecting a waveform, frequency, retrieving or storing to memory and selection of other functions is clunky without the software. Some of the buttons have dual functions so you have to push a "shift" button first to access the second function. They also located the on/off switch on the back of the unit. Overall, for under a $100 it will meet my needs, I don't work in a lab or calibrate instruments but as an engineer it does a lot for the money.

    Is this helpful? (0) (0)

  • By l***y

    May 7, 2018

    Item was well packed, new, and worked as specified

    Is this helpful? (0) (0)

  • By m***3

    April 24, 2018

    Great price, fast delivery, would buy again from this seller.

    Is this helpful? (0) (0)

  • By r***y

    April 6, 2018

    Great little signal generator. Thank you!

    Is this helpful? (0) (0)

  • By h***t

    March 10, 2018

    Versandzeit genau wie beschrieben, professioneller, reibungsloser Ablauf. Super!

    Is this helpful? (0) (0)

  • By d***1

    February 21, 2018

    I received what I expected. Thank you!!

    Is this helpful? (0) (0)

  • By y***t

    February 15, 2018

    Generator working perfectly. Fast shipment.

    Is this helpful? (0) (0)

  • By s***m

    January 25, 2018

    Excellent transaction, thank you very much!

    Is this helpful? (0) (0)

  • By Lee Cramer

    September 12, 2017

    Well worth the money. I was considering building a signal generator until I came across this. Rock-solid waveforms right up to 25MHz. UPDATE: Frequency adjustment stopped working today, one week after the return cutoff date. No way to contact seller. UPDATE 2: Several attempts at disconnecting power and rebooting failed to solve the problem. However, after spending a day on the shelf I decided to attempt some troubleshooting. When I powered it up, it was working to specs again.

    Is this helpful? (0) (0)

  • By r***b

    August 30, 2017

    Excellent seller - Great product - Highly recommended - Fast shipping!

    Is this helpful? (0) (0)

  • By n***b

    August 23, 2017

    Excellent. Fast shipping. Good seller.

    Is this helpful? (0) (0)

  • By j***k

    May 21, 2017

    Great little unit! Arrived before estimated date. Works perfectly.Great seller!

    Is this helpful? (0) (0)

  • By r***d

    January 10, 2016

    No problems. Great with my 70's Tek 465M o-scope.

    Is this helpful? (0) (0)

  • By t***8

    December 21, 2015

    GREAT TO DO BUSINESS WITH AAAAAAAAAAAAAAAAAAAAAAA++++++++++++++++++++++++++++++

    Is this helpful? (0) (0)

  • By m***a

    December 20, 2015

    Everything perfect!

    Is this helpful? (0) (0)

Топ продаж Больше

Пожалуйста, активируйте свою учетную запись и затем купите. Мы отправим вам электронное письмо с активацией, чтобы помочь вам завершить регистрацию.

Недавно просмотренные

НАШИ САЙТЫ РУКОВОДИТЕЛЕЙ

TOMTOP использует файлы cookie, чтобы дать вам лучший опыт покупок. Если вы продолжаете использовать наши услуги или создаете новую учетную запись, мы предположим, что вы согласны с нашей Политика конфиденциальности.

Скажите нам, какой продукт вы хотите приобрести в группе

Click the refresh verification code