Этот модуль может обнаружить постоянный ток в диапазоне 0-10A, точность 0.01A.
Особенности:
Диапазон обнаружения: DC 0 ~ 10A; Точность: 0.01A (10мА).
Обнаружение тока для управления реле затем контролировать цепь включения / выключения.
Установить время задержки, чтобы предотвратить снижение объема производства, с тем, чтобы защитить цепь.
С функцией калибровки ошибки.
Можно отключить светодиодный дисплей, чтобы уменьшить потребление энергии.
Функции Описание:
P-1: сверхтока обнаружения: когда детектирования тока <I1(low limit setting), the relay closes; > I2 (верхний предел настройки), открывает реле.
P-2: Под-ток обнаружения: при обнаружении тока> I2, реле замыкается; <I1, the relay opens.
P-3: Close in the Range: when the detecting current is between I1 and I2, the relay closes; relay opens in other situation.
P-4: Open in the Range: when the detecting current is between I1 and I2, the relay opens; relay closes in other situation.
P-5: Error Calibration and Delay Time Setting: the relay would not operate.
Buttons Description:
K1: Modes Selection;
K2: "+"
K3: "-"
Long press K1 for 2s into modes selection; short press K1 to select function and K2 to enter the mode.
Note:
After power on, the LED digits would pulse if the detecting current terminal is none.
Specifications:
Voltage: DC 12V
Detecting Range: DC 0~10A
Accuracy: 0.01A(10mA)
Standby Current: Approx. 20mA
Display: LED Digital Display
Item Size: 65 * 40 * 18mm
Package Weight: 29g / 1.04oz
Package List:
1 * DC Current Detection Module