Цена только в приложении:
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Looks to be around 1.975 inches at a glance with some calipers, but the tollerance is fairly sloppy on mine. I can't get to the machine screw due to the way it's installed on mine, but I believe it's metric. If no one else answers in a day or so, I'll try to disassemble and give full specs.
By K Watson on April 30, 2018
Thanks for your asking,of course，It can remove the water from the Thermoelectric Peltier Cooler and the assembly still hold together.
By ilastore-US SELLER on May 3, 2018
It is definitely possible but you have to make sure the hot side doesn't get too hot or it could damage the peltier plate. Maybe a voltage limiter or something in conjunction with the water block.
By Ross James on May 9, 2018
You could, but it probably would not be cold enough, and peltiers are extreamly inafficient (about 5% of the power is actually used to heat/cool it) if you want to know w it works, watch this: https://www.youtube.com/watch?v=1Kp_yWY2tdU and skip to 1:25 (or just watch the whole thing)
By John Poindexter on April 17, 2018
The necessary power supplies for the two items are very different: the fan only needs on the order of mA of current, so a small little power block that you plug into the wall will do fine. The TEC however will need many Amperes (I think you will need up to 10) and you need to make sure that you can regulate the curre… see more The necessary power supplies for the two items are very different: the fan only needs on the order of mA of current, so a small little power block that you plug into the wall will do fine. The TEC however will need many Amperes (I think you will need up to 10) and you need to make sure that you can regulate the current. So you need a regulating power supply with 12V and 10A. Hope this helps. see less
By Lukas Gruber on April 15, 2018
Well I think it could cool better then it did for us. We built a rather bigger fridge then we should have. If you kept the dimensions within what it’s specified for it should work good. Our daughter won the science fair with it so not so bad.
By Maria on February 25, 2018
It needs power to function
By guadalupe zarate on February 8, 2018
1/4"hose fits on it with a pipe clamp
By mike on October 2, 2017
No, it comes as a parts and you have to build it
By ali khairallah on August 25, 2017
Yes,Of course you can
By ilastore-US SELLER on June 14, 2017
Основанный на 20 Отзывы клиентов
Поделитесь своими мыслями с другими клиентами и получите баллы TOMTOP. Первые 5 отзывов получают двойные баллы!Написать отзыв
By Techno Caveman
August 1, 2017
All the parts to get started including thermal grease. No Assembly instructions, but assembly was easy. Nothing fragile. Small Phillips head screwdriver is the only tool needed. Fan could be bigger and more powerful. Ran everything on 12v at 3 amps from BMOUO 12V 30A DC power supplyFelt plenty of cold or heat. Just loosen the screws and flip the TEC over. Never reverse voltage or current. Fan wires have connector, TEC 12706 does not have a connector. Just wire with solder or "tinned" Also the fan wires are a different length. Recommend 12 year olds and up as the TEC can get pretty hot pretty fast. Good for school, learning or just fun.
November 30, 2017
October 25, 2017
October 22, 2017
By Hai Nguyen
September 1, 2017
By maria elizabeth pereira
August 22, 2017
By majd ismail
August 15, 2017
By Shaniqua Rudison
July 28, 2017
By Samantha Foss
June 26, 2017
By Gina S.
June 14, 2017
June 6, 2017
By Koren Barenboim
June 1, 2017
By Jeff Johnson
May 31, 2017
May 17, 2017
May 1, 2017
By logan kilbourn
April 30, 2017
By Billie Greenhalgh c/o Chris and Bob Acks
April 20, 2017
April 18, 2017
April 7, 2017
By Ross James
March 31, 2017
Горячее событие Больше
Топ продаж Больше
Ваш вопрос успешно отправлен
Пожалуйста, активируйте свою учетную запись и затем купите. Мы отправим вам электронное письмо с активацией, чтобы помочь вам завершить регистрацию.