Raptor S-Tower is BLHeli-S 4-in-1 ESC, coming with EFM8BB21F16G MCU, support Dshot / Multishot / Oneshot, support high KV motor, can support at most 500k eRPM. And integrated with current meter on the ESC, capable of displaying current with OSD directly in real-time. BLHeli-S firmware is the next generation code, following the base BLHeli code. It designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.
.jpg)
.jpg)
.jpg)
Features:
EFM8BB21F16G MCU, pipelined 8-bit C8051 core with 50MHz maxium operating frequency.
Dedicated high frequency driver, makes the start more smooth. ESC maximum speed is limited to 500k eRPM.
F3 flight controller, supports PPM, PWM and SBUS remote control / receiving mode.
Dual-way signal transmission method to connect the flight controller and ESC greatly guarantee the signal stability.
Exposed pads for battery and motor wires, fast welding without additional disassembly, makes the installation faster and more convenient.
FC integrated OSD, also integrated 5v/1A, 12V/500mA for large image transmission, camera, buzzer, LED and other peripheral devices; provided several silicon cables for connectors on FC and will give you an unprecedented experience for installation.
Connect computer via USB on the flight controller, then can upgrade ESC software directly or adjustable the ESC settings directly.
Built-in current meter, OSD directly display the real-time current without any additional connection.
The code supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42 and Multishot. The input signal is automatically detected by the ESC upon power up.
Supports Dshot150, Dshot300 and Dshot600. Dshot is digital signal, anti-interference ability is stronger, and do not need throttle calibration.
It comes with a pack of cables for connecting all the peripherals directly.
Specifications:
Brand name: Flycolor
Item name: F3 flight controller with 4 In 1 BLHeli-S 30A ESC
Cont.current: 30A
Burst current (10s): 40A
BEC: No
Lipo cells: 2-4S
Structure: Tower
Port: 5V/1A 12V/500mA etc
ESC support rmp: at most 500k
Weight: About 20g
Dimension: 41.5 * 36 * 19.6mm
Suitable for 170-450mm quads
There may be some deviation due to manual measurement.
Package information:
Package size: 9 * 6.5 * 4cm / 3.54 * 2.56 * 1.57in
Package weight: 98g / 3.45oz
General box package
Package list:
1 * Flycolor Raptor 390 S-Tower
1 * Connection Wires Kit
.jpg)
.jpg)
.jpg)
