The product is an example of a combination of an oscilloscope and a autorange multimeter. Support oscilloscope and multimeter dual modes switching. It can simultaneously measure a variety of electrical parameters or capture waveforms, and display the electrical parameters or waveforms of electrical signals. Supports AC and DCvoltage, AC and DCcurrent, resistance, capacitance, diode, on/off test. Multifunctional design, with waveform adjustment, data storage, automatic shutdown, and with overload protections functions. It can easily handle measurement in various fields, widely used in the fields of testing and debugging of electronic circuits, troubleshooting and repairing of electronics, communications, computers, etc.
Features:
【Concise Appearance & 2in1 Versatile Design】: Compact and portable body design with simple and elegant appearance, easy to carry, does not occupy space, says goodbye to the traditional bulky and difficult to carry. It's a portable tool for on-site debugging. This product ingeniously integrates digital oscilloscope and multimeter functions into one device. Supports oscilloscope and multimeter dual-mode switching.
【Digital Color Display & High Reliability】: With a 2.4" clear definition color display, with high resolution and large font for easy reading of data, making it applicable to various measurements in complex environments. Suitable for middle-aged and elderly electricians to use, easy to operate. Built-in 10A double fuse, with 750mAh overload protecting function, and 15 minutes no operation auto-sleep function. With panel calibration function, memory calibration factor without potentiometer adjustment for higher reliability.
【Digital Oscilloscope Function】: It can simultaneously measure multiple electrical parameters or waveforms, and display electrical parameters or electrical signal waveforms. The oscilloscope mode supports a high-speed sampling rate of up to 50Msps and an analogue bandwidth of 10 MHz. With a one-touching automatic waveform capture function, there are three waveform scanning modes such as automatic/conventional/single. Waveform holds during measurement, and max 100 data sets and 10 waveforms can be saved. Waveform amplitude up to 200V/div, up to 1600Vpp measurement.
【Multimeter Function】: Automatic/manual ranges switching, display of real-time data, and stored data on the same screen. Multiple measurement design, supporting diode detection, on/off test, AC and DCvoltage measurement, AC and DCcurrent (mA, 10A) measurement, frequency measurement, duty cycle measurement, resistance measurement, capacitance measurement, and with measurement data hold function. Support relative measurement mode and P-H mode, the relative value measurement can effectively eliminate the leads resistance, distributed capacitance, or interference signals and the P-H mode displays the measured maximum and minimum values. And also supports storage and readout of measurement data for more convenient to backup and analysis.
【Wide Applications】: With high accuracy, high speed, high sensitivity, and multiple measurement modes, and can easily handle measurement in various fields, widely used in the fields of testing and debugging of electronic circuits, troubleshooting and repairing electronics, communications, computers, etc.
Specifications:
Name: 2in1 Oscilloscope Multimeter
Material: plastics
Battery: 3 * 1.5V AA batteries
(not included)
Display: 2.4inch color display, 240*320, white backlight
Input resistance: about 10MΩ
Automatic sleep: 15 minutes or disabled
Static operating current: Multimeter approximately 75mA; Approx. 150mA for oscilloscope
Shutdown current: <10μA
Save capability: 100 records of digital multimeter data, 10 records of OSC waveforms data
Usage environment: 0℃ to +40℃; <75%RH
Storage conditions: -10℃ to +60℃; <90%RH
Oscilloscope:
Simulation bandwidth: 10MHz (500mV/div to 20V/div) 20V/div above for reference only
Maximum equivalent sampling rate: 50Msps
Number of channels: 1
Input resistance: about 5MΩ
Vertical sensitivity ranges: 500mV-200V/div
Vertical ranges accuracy: ±(5%+ 0.2div)
Time base ranges: 200ns-10s/div
Time base accuracy: ±(0.01%+ 0.1div)
Trigger mode: automatic / single / conventional mode
Triggeredge selection: rising/falling edges
Automatic settings: Automatic setting of time base and vertical ranges
Automatic measurement function: Vp-p, Vavg, Vrms, Hz
Multimeter:
DC Voltage: 600mV/6V/60V/600V/1000V; 0.1mV/1mV/10mV/100mV/1V; ±1.2%rdg + 5dgt
AC Voltage: 600mV/6V/60V/600V/750V; 0.1mV/1mV/10mV/100mV/1V; ±1.2%rdg + 5dgt(50Hz-60Hz), ±1.5%rdg + 5dgt (100-400Hz)
DC Current: 60mA /600mA, 10µA /100µA, ±1.2%rdg + 5dgt;
6A /10A, 1mA /10mA, ±1.5%rdg + 5dgt
AC Current: 60mA /600mA, 10µA /100µA, ±1.2%rdg + 5dgt(50Hz-1kHz);
6A /10A, 1mA /10mA, ±2%rdg + 10dgt(50Hz-1kHz)
Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ, 0.1Ω/1Ω/10Ω/100Ω/1kΩ/10kΩ; ± (1.0%rdg + 5dgt), ± (3.0%rdg + 5dgt) / 60MΩ
Capacitance: 99.99nF/999.9nF/9.99μF/99.99μF/999.9μF, 10pF/100pF/1nF/10nF/100nF, ± (3.0%rdg + 10dgt);
9.999mF /99.99mF, 1μF /10uF, ± (5.0%rdg + 15dgt)
Frequency: 1.000Hz-20.00MHz, ranges > 2Vp-p, ± (0.5%rdg + 5dgt) (20M or more for reference only)
Diode/on/off test: Open circuit voltage about 2.8V; judgment resistance: about 50Ω
Fuse specification: 750mA/250V,10A/250V
Observation area: 49.0 * 36.7mm / 1.93 * 1.44in
Item size: 83 * 160 * 32mm / 3.27 * 6.30 * 1.26in
Item weight: 180g / 6.35ounce
Package size: 190 * 140 * 45mm / 7.48 * 5.51 * 1.77in
Package weight: 390g / 13.76ounce
Packing List:
1 * 2in1 Oscilloscope Multimeter
1 * Pair of Test Leads
1 * Cloth Bag
1 * Instruction Manual
