PD60 Fuel Injection Ignition Simulator is a very comprehensive tool for repairing and testing car computers. It can not only simulate gasoline and derv fuel injectors, but also simulate ignition coils, which is very suitable for carcomputer repairing and testing. It is a very practical carcomputer repairing and testing tool, greatly improving car repairing shops' efficiency.
Features:
Injectors Simulation Function: Supports 12-24V electromagnetic derv fuel injectors simulation and 12 V gasoline injectors simulation.
Ignition Coil Simulation Function: Supports positive trigger ignition coil simulation and negative trigger ignition coil simulation.
Display Function: Built-in real-time display computers module, with voltmeter and ammeter function, real-time monitor the voltage and current during the fuel injection and ignition process in real time, helping the repairer to determine the problem more accurately.
With CAN Data Acquisition Socket: PD60 is equipped with a CAN analyzer socket and connection cable, which can conveniently acquire, analyze, store and playback CAN bus data (telegrams), which is very convenient to use.
Rich Functions: With over-current protecting circuit, with on-board diagnostics socket, with high-power resistor (for fuel metering valves simulation), with 120Ω terminal resistor.
Note:
This product does not include a signal generator and cannot simulate sensor signals. This instrument cannot simulate sensor signals such as crankshaft, camshaft, temperature, pressure, throttle position, accelerator pedal, etc.
The instrument needs external 12-24V powersupply to work properly.
Derv fuel injection coil resistance value is very small, usually in 0.3-0.5Ω.
PD60 can simulate 12-24V electromagnetic derv injectors, but not piezoelectric crystal injectors.
The instrument has internal over-current protection, if the power output is short-circuited or the current is too large, the instrument will automatically cut off the power.
PD60 is a special equipment for auto mechanic, non-professionals should use it under the guidance of auto mechanic.
Specifications:
Name: Ignition Simulator
Material: plastics+metal
Item size: 180 * 130 * 45.5mm / 7.09 * 5.12 * 1.79in
Package size: 250 * 200 * 150mm / 9.84 * 7.87 * 5.91in
Package weight: 500g / 1.10lb
Packing List:
1 * Ignition Simulator
1 * Power Cable
1 * High Power Resistance
1 * CAN Cable
3 * Computer Connection Cable
1 * Flat Cable
9 * Wiring Plugs