Radiolink R6DSM, 2.4G 10 channels receiver, DSSS and FHSS spread spectrum working synchronously, SBUS and PPM signal support, use for Radiolink transmitters AT9S AT10 AT10II transmitter, is the best choice for racing drone.
Feature:
Radiolink R6DSM, 2.4G 10 channels receiver
Use for Radiolink transmitters AT9, AT9S,AT10 and AT10II
DSSS and FHSS spread spectrum working synchronousl
SBUS and PPM signal support
Mini design for convenient assembling and operating
Specifications:
Brand: RadioLink
Model: R6DSM
Channel: 10channel
Working voltage: 4.8-6V
Working current: 38-45mA (input voltage: 5V)
Section precision: 4096
Control distance: about 600 meters
Two signal working mode:
Blue/purple LED, SBUS signal, 10 channels totally
Red LED always, PPM signal, 10 channels totally
SBUS and PPM signal change: short press the ID SET switch two times within 1 second, the signal is changed from SBUS to PPM. The red LED indicates the PPM and blue/purple indicates SBUS
Item size: 25 * 15 * 5mm (without cable)
Item weight: 1.6g
Package Information:
Package size: 4 * 3 * 1cm / 1.6 * 1.2 * 0.4in
Package weight: 3g / 0.1oz
Poly package
Package List:
1 * Radiolink R6DSM RC Receiver
How to match code with transmitter:
1. Place the transmitter and the receiver close to each other within 1 meters
2. Turn on the transmitter, then power on the R6DSM
3. Connect CH3 of R6DSM to ESC
4. There is a black button on the R6DSM, press the binding button twice in two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when receiver signal LED always on