This solar motion wall light with 42 LEDs adopts PIR human motion induction technology and unique light controlling design, widely applied to outdoor use such as patio, backyard, garden, balcony, deck, driveway , garage and so on.
Features:
LIGHT CONTROL: it charges when the solar board meet with shine and discharges in darkness.
PIR MOTION SENSOR: it will start up after inducted in the darkness and extends for ten seconds when people leave the induction area.
EASY INSTALLATION: it is wireless and equipped with a set of screws, easy to install it onto wall.
ENVIRONMENTAL FRIENDLY: it can reduce light pollution as it is powered through absorbing sunlight.
BUILT-IN SUPERCAPACITY BATTERY: it has built-in large battery(18650) capacity of 2200mAh to ensure the long endurance.
EXTENSIVE APPLICATION: its protection grade is IP65, widely applied to outdoor use such as patio, backyard, balcony, deck, driveway, hallway, corridor, garage etc.
3 WORKING MODES: there are 3 working modes to fit in different places: induction function(3.8V/1400mA), dim light pattern(3.8V/30mA) and steady on(3.8V/400mA).
HIGH BRIGHTNESS: it is of high brightness since it adapts 42pcs of SMD2835 LEDs.
Specification:
Output:3.2V/4W
Solar panel:6V/2.5W,18% conversion of power
Solar panel material:
polycrystalline silicon
Battery:1* built-in 18650 lithium battery(3.7V/2200mAh)
Light source: SMD2835 LED
Light bead quantity:42
Light color：white
Luminous of single bead: 28LM
Luminous of the light:600LM
Water resistance:IP65
Charging time:6-8 hours under the sun
Working time:6-8 hours
Item color：white/black(optional)
Material: ABS
PIR sensing angle:120°
Sensing range
：1-8m/3.3-26.2ft
Installation height
：3-5m/9.8-16.4ft
Solar panel size:162*94mm/6.4*3.7in(L*W)
Light size
：180*121*30mm/7.1*4.8*1.2in(L*W*H)
Light weight:268g/9.5oz
Package size
：187*130*35mm/7.4*5.1*1.4in(L*W*H)
Package weight:324g/11.4oz
Functional switch:
1. Press 3 seconds to switch on.
2. First pattern: body induction& dim light pattern
(While people go through sensing area, the brightness will be strong. The light turns to dim after people leave.)
3. Press again, change to body induction mode.
(While people go through sensing area, the brightness will be strong. The light turns off after people leave.)
4. Press again: the solar lamp will turn on all the time.
(The light will turn on automatically at night, and it will be shut down automatically after 5 hours.)
5. Press again, it will turn off.
Notes:
1. For the first time use, please put the product under the direct sunlight charging for several hours before use.
2. When the product is not in use for a long time, please recharge the battery every 3 months a time.
3. The working time will be affected by the sunlight exposure illumination and weather conditions. It will charge faster when the sunshine is stronger; on the contrary, the effect will decrease.
Package list:
1*Solar motion light
1*Set of Screw
1*User manual(Chinese& English)
