Digital HD LCD Display Car MP3 Player BT 2.0V Car Stereo with USB/SD/MMC/MP3/WMA/FM Radio Receiver

Note: please confirm if the voltage fit and then install.Our prodcut working on 12V only.
Please confirm the installation size of your car.

Features:
The latest version of the international first-line brand style, fashionable appearance and atmosphere, let your car show high-grade.
USB/SD/MP3/WMA/WAV Player,FM Receiver.
Electronic sysetem,preset EQ(POP/POCK/CLASS)
18 Presets memory(18FM)
Repeat/Random/Intro Play
Power Output 60Watts*4
Digital Clock Display 
Full Finction Remote Control

Installation notes:
Please refer to the installation and wiring diagram
Install the metal sleeve:Refer to the installation diagram,insert the metal frame insert he instrument panel,and use the screwdriver to eject the card on the metal sleeve to secure the position.
Power and grade: Positive level connect to car battery positive,negative level connect to ground(battery negative or bottom of the car,note:in order to prevent short circuit,connecting the battery negative after all installed)

Installation Instructions:
Yellow(memony wire):the positiveconnections with 12V constant voltage(provide to the machine"s memory lines)
Red(power line):12V power switches and connected(this line with the vehice ignition switch control):speaker wire connection:This device is designed to use the 4-8 Ω load impedance speakers,connected to speakers before you disconnect the power and prevent short circuits.
Note:Do not use the speakers connected to ground with the body or even touch each other,not to collide with power lines,otherwise it willdamage the machine replace the fuse bad first pull out the fuse.the new standards have the same fuse inserted in the output blocks(see wiring diagram)install the host:the antenna into the antenna base,the right to adjusst the antenna if they can,you may get a good reception.

Specifications:
Tuning range: 87.5-108.0MHZ
Sensitivity: ≤20DB
Stereo separation: ≥25DB
SNR: ≥60DB
Music format support:MP3,WMA
Misplay format:ID3 Display
Distortion: ≤0.3%
SNR: ≥60DB
Power supply:12V
BT version:200v
Max output power:60W
Panel size:188Wide*150Deep*58high(mm)
Package size:21*8*7cm
Pacakge weight:435g

Packing list:
1* Host
2* Installation wires
1* Remote control
1* User manual(Support English Languags only)