Price:
руб.
1199.30
Loading...
Ship to
color:
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Questions & Answers
yes,it have a 3/8" thread hole on the bottom. it can be directly mounted onto any ball head, tripod, gimbal and monopod.
By Yumi Kawamura on February 8, 2018
The round base plate is 2.375" in diameter. The fixed side of the clamp lip (the side with the leveling bubble) is 1.875" wide. The movable clamp lip is 1.75" wide.
By California Bill on October 25, 2017
I believe a pu-70 is longer than a pu-50 not thicker.
By John M on October 2, 2017
Good day, funny, I had the reverse problem when I first received this clamp. It wouldn't close enough. But when I disassembled it, I found two springs, that were too long to allow the clamp to close tightly. I trimmed about two turns off each spring and it works perfectly for me. But, as far as opening, mine opens enou… see more Good day, funny, I had the reverse problem when I first received this clamp. It wouldn't close enough. But when I disassembled it, I found two springs, that were too long to allow the clamp to close tightly. I trimmed about two turns off each spring and it works perfectly for me. But, as far as opening, mine opens enough to top loads with no problem. Sorry for your troubles!!! Keep shooting! see less
By Randy Frieder on July 20, 2017
Discussions
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contacts
open this forum in full pageAverage Rating:
4.5based on 48 Customer Reviews
Share your thoughts with other customers and get Tomtop Points, the first 5 reviews get DOUBLE Tomtop Points!
Write a Customer ReviewBy PawPaw
November 4, 2019
By m***c
April 16, 2019
By ***
February 14, 2019
I have a Manfrotto 055XProb tripod with 496RC2 ball head. I really like the Manfrotto quick release system as its easy to use and feels secure. However, I need to be able to use an L Plate and the Manfrotto version is expensive. I was also curious to find out, first hand, more about the Arca Swiss mechanism and these clamps and plates are really inexpensive. The Andoer clamp seems well made and comes complete with screw thread adapter and allen key. The clamp has two bubble levels, which have little value for me, and a screw knob to close the clamp on the plate. The clamp could mount directly onto my 496RC2 ball head but this is not what I want because I prefer the Manfrotto RC2 clamp. If you do want to mount it directly then you need either a boss adapter or someway to prevent the Arca Swiss clamp from rotating on the ball head as it will only be held in place by friction and the tightness of the screw. Using the screw thread adapter I can mount this Arca Swiss clamp on top of the Manfrotto 200PL plate. There's one 'gotcha' with this which can be overcome. If you mount the Arca Swiss clamp such that the screw knob is facing you (towards the back of the Manfrotto Plate) then it rubs on the Manfrotto release lever. I got around this by having the screw knob towards the front of the camera (under the lens). This has the added advantage of making the top bubble level more visible - if you need this. The Andoer plate is also reasonably well made but has one problem. The D Ring on the screw fixing is too small to get a decent grip on it, which makes it hard to tighten securely. Fortunately a 2p coin fits well in the screw slot and helps overcome the second problem - the D Ring is too lose so that as you try and fit the plate into the clamp it hangs down and prevents the plate sliding in easily, so I have removed it. All in all pretty good but I'll only use the setup when I need to use an L Plate.
By l***o
May 31, 2018
By r***h
May 14, 2018
By j***3
May 8, 2018
By k***n
May 2, 2018
By n***e
March 11, 2018
By a***1
March 9, 2018
By g***u
February 9, 2018
By t***8
February 5, 2018
By l***m
January 17, 2018
By n***a
January 17, 2018
By a***g
January 14, 2018
By c***n
January 10, 2018
By w***r
January 9, 2018
By l***n
December 29, 2017
By i***c
December 22, 2017
By b***1
December 16, 2017
By ALTON A. ALEXANDER
December 3, 2017
Top Sellers More>