Price:
€
33.18
Loading...
Ship to
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
1. DC voltage(DCV)
range |
accuracy |
Resolution |
600mV |
±(0.5%+5d) |
0.1mV |
6V |
1mV |
|
60V |
10mV |
|
600V |
100mV |
|
1000V |
±(1.0%+6d) |
1V |
Input impedance: 600mV>60MΩ, 10MΩ
Overload protection: a)mV range DC current or 250V AC peak
b)1000V DC current or 750V AC peak
2. AC voltage
range |
accuracy |
Resolution |
6V |
±(1.2%+5d) |
1mV |
60V |
10mV |
|
600V |
100mV |
|
750V |
±(1.5%+5d) |
1V |
Input impedance: 10MΩ
Overload protection: a)mV range DC current or 250V AC peak
b)1000V DC current or 750V AC peak
Frequency response: 40 ~ 1000
Display: the average response (the effective value of sine wave calibration)
Duty display: (0.1%-99.9%)
3. DC current(DCA)
range |
accuracy |
Resolution |
60uA |
±(0.8%+10d) |
0.01μA |
6mA |
1μA |
|
60mA |
10μA |
|
600mA |
±(1.2%+10d) |
100μA |
10A |
±(2.0%+10d) |
10mA |
Maximum input current:10A(No more than 15 seconds)
Overload protection:0.4A/250V recovery fuse
10A/500V fuse
4. AC current(ACA)
range |
accuracy |
Resolution |
6mA |
±(1.0%+10d) |
1.0μA |
60mA |
10μA |
|
600mA |
±(1.5%+10d) |
100μA |
10A |
±(2.5%+10d) |
10mA |
Maximum input current: 10 A (not more than 15 seconds).
Overload protection: 0.4 A / 250 recovery fuse;10A/500V fuse
Frequency response: 40 ~ 1000 Hz
Duty ratio : (0.1% ~99.9%)
5. Resistance(Ω)
range |
accuracy |
Resolution |
600Ω |
±(0.8%+10d) |
0.1Ω |
6kΩ |
±(0.8%+3d) |
1Ω |
60kΩ |
10Ω |
|
600kΩ |
100Ω |
|
6MΩ |
1kΩ |
|
600MΩ |
±(1.2%+10d) |
100kΩ |
open-circuit voltage:about 1.0V。
Overload protection:250V DC current or AC current peak value
6. Diode and continuity Test
range |
value |
test conditions |
|
Positive voltage |
Positive DC current about1.0mA, |
|
About 50Ω |
open-circuit voltage 1.0V |
Overload protection:250V DC current or AC current peak value
warning:For the sake of safety, do not input voltage range.
7. Capacitance
range |
accuracy |
Resolution |
10nF |
±(4.0%+10d) |
0.001nF |
100nF |
±(3.0%+5d) |
0.01nF |
1μF |
0.1nF |
|
10μF |
10nF |
|
100μF |
10nF |
|
6000μF |
±(5.0%+10d) |
100nF |
Overload protection:250V DC current or AC current peak value
Note:Below 100PF maybe cannot test
8. Frequency (Hz%)
range |
accuracy |
Resolution |
100Hz |
±(0.5%+3d) |
0.1Hz |
1000Hz |
1Hz |
|
10kHz |
10Hz |
|
100kHz |
100Hz |
|
1MHz |
1kHz |
|
10MHz |
10kHz |
sensitivity:2.0V
Overload protection: 250V DC current or AC current peak value
Duty ratio: (0.1%-99.9%)
range |
accuracy |
Resolution |
0.1%-99.9% |
±(0.5%+3d) |
0.1% |
9.Triode
range |
Display range |
Test condition |
HFE(NPN or PNP) |
0-1000 |
Base current about 1mA VCE |
10. Temperature
range |
accuracy |
Resolution |
0℃-300℃ |
±(1.0%+4d) |
1℃ |
301℃-1000℃ |
±(1.9%+5d) |
1℃ |
32℉-600℉ |
±(1.2%+6d) |
1℉ |
601℉-1832℉ |
±(1.9%+6d) |
1℉ |
Thermocouple: Kthermocouple
10. NCV
Set the function to NCV range and the meter display“EF” symbol. Put the meter close to the test object,when the object’s voltage is more than 110V(AC RMS) and the meter display “-”symbol,When sensing voltage is higher and shows more “-”symbol,the buzzer alarm sound the more densely populated.The red l ight is more bright.
Questions & Answers
Discussions
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contacts
open this forum in full pageAverage Rating:
4.5based on 1 Customer Reviews
Share your thoughts with other customers and get Tomtop Points, the first 5 reviews get DOUBLE Tomtop Points!
Write a Customer ReviewBy a***7
September 4, 2017