This pen replaces ink with filament which melts at a high temperature to create a 3D object instead of just an idea on paper. It can be used to draw in the air or on surface as well as tracing objects on paper. Use this pen to create any 3D objects you like. The only limitation of 3D drawing is your imagination.
Features:
3D Pen for freehand drawing of 3D objects.
Lightweight and compact design.
Ergonomic design for optimum handling.
Super silent design and intelligence standby modes, extending the lifetime of the pen.
With LCD screen shows temperature and filament ABS or PLA, so you can choose corresponding material model.
The up and down buttons of the LCD screen can adjust the temperature and choose ABS or PLA material.
Integrated and compact design, electric heating nozzle is convenient for maintenance and replacement.
Adjustable stepless speed by single hand, easy to operate.
2 LED indicators to check the operating temperature.
It can be used to draw in the air or on surface as well as tracing objects on paper.
Suitable for painting workers, product designers, hobbyists, children, students, creative individual, etc.
Operating instruction:
Plug the adapter.
Switch PLA/ABS option(show in LCD screen) by pressing the buttons.
Press the wire feed button, then the pen starts preheating. When the indicating light turns red into green, means it has reached the temperature of melting point.
Put filament into the import hole, the filament will be sent into the hole by the inner motor.
Keep pressing the wire feed button, the filament will be out of nozzle, enable to draw what you want.
Press the speed switch, you can freely change the filament's output speed.
Keep pressing the wire unload button, the filament can automatically withdraw.
The LCD screen shows the temperature in Celsius degree.
Press the two temperature control button near the screen to adjust the temperature.
Change filament:
When change the same filament of different color, make sure to withdraw the filament totally out of the pen and cut the filament ending neatly, so as to avoid mixing one color of filament with another one.
If the pen in the ABS mode, unload the filament, restart the pen, switch to the PLA mode by pressing the selection of material/temperature button.
Temperature adjustment:
Due to the different color of filament with different melting point, you need to adjust the temperature while working.
1. Low speed working, if you hear the nozzle has "crackling" sound, it means the temperature is too high, adjust the temperature button to low down the temperature about 8-15℃.
2. If come out lots of bubbles, it means the temperature is too high, adjust the temperature button to low down the temperature about 8-15℃.
3. When the output filament surface color looks dim and dark, and the motor sounds obvious difficulty that means the temperature is on low mode, adjust the temperature button to up regulate the temperature about 3-5℃.
Note:
1. When feed the filament into the filament hole or withdraw from it, do not push the filament as the pen will send the filament automatically. And remember to cut the end of the filament neatly after withdrawing the filament from the hole.
2. The painting pen nib and the near area are high temperature area, the highest temperature can reach 230 degree, do not touch the nib with hands or touch others objects with the nib.
3. This device is suitable for children over 8 years old and adult use. Children should use it under the tutelage of adult.
Specifications:
Input: AC 100-240V, 50/60Hz
Output: DC 12V, 300mA
Nozzle diameter: 0.7mm
Pen color: Green, pink, yellow, purple (optional)
Printing filament: 1.75mm ABS/PLA (only 1.75mm is compatible)
Discharging way: Fused deposition modeling
Molding mode: 3D modeling
Writing speed: Adjustable
Heating Temperature: ABS: 160℃-230℃ PLA: 160℃-180℃ (adjustable)
Housing material: Plastic
Adapter: US, EU, AU, UK (optional)
Adapter cable length: 170cm / 5.57ft
Item length: 18.5cm / 7.28in
Item weight: 61g / 2.17oz
Package size: 22 * 16.5 * 6cm / 8.66 * 6.49 * 2.36in (L * W * H)
Package weight: 339g / 11.98oz
Package List:
1 * 3D printing pen
1 * Power adapter
1 * PLA Filament
1 * User manual (English)