Mouse over to zoom in
5.3
Flysky SM100 USB RC Helicopter Airplane Simulator for Flysky FS-i6 FS-i4 FS-TH9X FS-T6 FS-T4B FS-GT3 FS-GT2 Remote Controller
Price:
US$
5.30
Loading...
Ship to
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Features:
Supports Esky, Futaba, JR, FS simulator software.
It can transfer the PPM signal to PC internal channel control vector.
Input: 4-8 channel PPM signal.
Connection of a remote control to a parallel port.
Connection of a remote control to a serial interface.
System Requirements:
OS: Windows 98/2000/NT/XP
Hardware:
Intel pentsum 600 or above;
32MB AGP-3D Graphics Card;
128MB RAM;
10GB HDD or above;
52X CD-ROM.
Specifications:
Input: 4-8 channel PPM signal
Model: FS-SM100
Support: USB HID 1.1 specification
Suit for: FS-i6 FS-i4 FS-TH9X FS-T6 FS-T6B FS-T4B FS-GT3 FS-GT3B FS-GT2 remote controller
Cable Length: 1.5M
Net weight: 87g
Gross weight: 97g
Item Includes:
1 x USB Simulator Cable
2 x Adapter Cables
Questions & Answers
I am using a Flysky and it works great, once in a while you will have problem calibrating sticks but keep trying and will work.
By Wesley R. on March 17, 2018
It should. I used it with a Devo7 a Chinese brand. They have different adapters that work with most brands
By Skater boy on March 14, 2018
Hi The cable works with my DX6i spectrum radio. I have used it with aeroflyRC 7, Next RC and Cleawview RC. It should work with your radio and software regards
By GIUSEPPE BAGORDA on February 11, 2018
This only speaks to Mac compatibility but: The cable was plug and play, and works great, on my iMac (2013?, Yosemite) -- with Spektrum DX4e and Heli-X (version 5, I think).
By neildo on December 13, 2017
Yes. I have only used it with OSX and it works as expected.
By Mark Bryant on November 27, 2017
It does work on Mac OSX, have been using it for awhile on my MAC, works good, just installed Freerider and played with it a bit and got it to work.
By Wesley R. on September 3, 2017
Yes. I use it on my MacBook Air with aerofly RC 7 flight simulator.
By George Sievert on April 10, 2018
I couldn't get it to work no mater what I did.
By Chopper Gal on May 7, 2018
I can vouch that it works on a Mac. However, I don't know what a X9D is, I'm a Spektrum guy.
By Dr. Daniel Kester on April 29, 2018
Discussions
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contacts
open this forum in full pageAverage Rating:
4.4based on 224 Customer Reviews
Share your thoughts with other customers and get Tomtop Points, the first 5 reviews get DOUBLE Tomtop Points!
Write a Customer ReviewBy Joseph Alvan
November 5, 2019
Works great for me, I'm using it with old futaba 4 chanel t4vf from the 90' Few notes for future buyer On win 10 build 1909 it's plug and play you don't need to download driver Also the free simulator FMS won't work on win10 without a lot of tweaks (and it's graphics is crap anyway...) After long search i found ClearView it's very nice simulator that you can try before buy and it's not that expansive (39$) in comparison to the other SIM's out there (60$ and above) So the combination Win10 + futaba t4vf + usb dongle + ClearView works great for me Hope it helps
By r***n
May 22, 2018
By v***n
May 3, 2018
By j***m
April 22, 2018
By d***t
March 9, 2018
By e***w
December 11, 2017
By D. Spaeth
November 26, 2017
By M***a
November 23, 2017
By Michael Marcos
November 9, 2017
By Clay Walton
November 9, 2017
By Sam S.
November 2, 2017
By The Davis's
October 31, 2017
By h***M
October 30, 2017
By Keith W.
October 30, 2017
By buildAndPlay
October 28, 2017
I'm using mine for Heli-x 6 on a Dell laptop with Windows 10 with a Spektrum DX6i controller. At first it wouldn't work for me at all. The controller configuration in Heli-X wouldn't show any movement of the sticks. I found a link on the Heli-x forum recommending this page... (Amazon won't let me put a link here but tinyurl dot com slash je65qc9 will get you there) which instructs you to find the device driver and then alter a couple of registry settings to turn off energy management on the device. I really had zero hopes that would help but it actually started working after that! My computer varied slightly from the instructions in that after I found the InstancePath folder in the registry there were two folders in there that I had to go into to get at the Device Parameters, so I just updated both of them. I should note that I also tried the cable on my Windows 7 laptop with no luck. I haven't tried the above fix on the Windows 7 machine.
By L. Gibbs
October 26, 2017
This is a handy little adapter. Been using it with a Spektrum DX6i to control Liftoff on macOS. It sometimes looses connection ever once in a while, though might just be me bumping the connector on the TX. When that occurs, it is easily reset by unplugging the adapter from both the computer and the transmitter, waiting a few seconds and reconnecting everything again. (I also tested it on the VelociDrone demo, but couldn't get the radio to be detected by the game)
By Umut
October 24, 2017
By D. Parker
October 24, 2017
Product as advertised, works well & no problems - but make sure if you use a Turnigy 9x or the FlySky TH9x to remove the RF module for the cable to work properly with your simulator. You may need to calibrate your transmitter in order to get it to work correctly within the sim, but it's pretty simple & lots of videos on youtube to explain the setup & how-to's. I was a rank beginner and still managed to figure it out without too many problems.... after I removed the RF module that is. 5 stars - great price, as advertised & fast shipping.
By kenneth daniel koch
October 23, 2017
By Corundum
October 22, 2017
I used this to connect my turnigy tgy-i6 to windows 8. Running the FPV Freerider sim. Works great, just make sure to calibrate your controller, and make sure throttle 0 is at the bottom, not the middle. The package was branded Fly Sky. For $15 ($10 for cord and $5 for freerider) I can fpv this winter!
