Preço apenas no APP:
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Resposta da questão
Yes, Comes with a case.
By John M. Paterson Jr. on June 5, 2018
!00 uF is the max.
By RDS on May 9, 2018
Data can be kept if you press "hold" button and will disappear if you press "hold" again.
By Jose on April 28, 2018
On the back of my meter, it says that it "Conforms To UL STD. IEC61010-1".
By Tech Guy on April 15, 2018
600 VDC max.
By John M. Paterson Jr. on March 16, 2018
By Kanako Ogino on February 20, 2018
Yes... as long as your welding current does not exceed the Meter's maximum DCA's capability (400A's).
By Tod on February 17, 2018
Don't know about true RMS, but seems to measure DC Amps just fine.
By John M. Paterson Jr. on February 7, 2018
Tje equipment was used in the field and their options were tested, there was no problem in their operation. only the holster where it is stored is something small.
By Freddy Toro on February 4, 2018
Por favor, note que o TOMTOP Forum é uma comunidade para troca de ideias e ajuda a procurar, durante o qual os entusiastas da tecnologia participarão na discussão, enquanto isso, o serviço de atendimento ao cliente da TOMTOP (com o ícone do serviço ao cliente Tomtop) será oportuno, com a mesma função que o contato em http : //www.tomtop.com/contactsabra este fórum em página completa
baseado em 11 Avaliações de Clientes
Compartilhe seus pensamentos com outros clientes e obter TOMTOP Pontos, os primeiros 5 avaliações obter o dobro TOMTOP Pontos!Escreva comentários de Cliente
By Old Engineer
August 17, 2017
I bought this because it was the first inexpensive (under $200+) clamp-on meter I found that works with DC current. It turns out that I use the DC current feature nearly as much as all the other features combined. I got used to that with an expensive meter and wanted a second one with that capability, but wasn't willing to pay that price again. I compared the two meters on current measurements, and this one is very close to the other (more expensive) one. DC current measurements are finicky (because of the non-varying magnetic field), so you need to constantly re-zero between measurements, or when changing meter position. But that is just the nature of a DC clamp-on current measurement - any magnetic field (including the earth's) will influence it. Be willing to take some care in your measurements and you will be able to get data that is rare in any meter, and even more so in an inexpensive one such as this. The non-contact voltage indicator is a bit overly sensitive. With most of the non-contact voltage indicators I have I am able to tell the difference between the hot and neutral wires in a cable. With this one it triggers when I even get near the cable, and will even detect voltage on a cable inside of a wall - so that could be useful - but not for determining which conductors are hot.
March 16, 2018
March 3, 2018
December 17, 2017
By Nasser B.
December 1, 2017
By Erik Hand
August 22, 2017
By Tech Guy
August 18, 2017
This meter works very well. It feels very nice in your hand ... not too heavy and not too light. It feels like it will last a long time. Auto-off works well. I mostly use it to read Amps across cables which are connected to my solar and lithium battery system, which it does very well.
By joe somsack
August 18, 2017
August 14, 2017
By Mary Alvarado
July 21, 2017
By Tomas Sweet-Reyes
July 16, 2017
Top vendas Mais
Sua pergunta foi enviada com sucesso
Por favor, ative o seu e-mail registrado, se não recebeu seu e-mail de ativação, por favor clique no botão abaixo
NOSSO SITE CORRER DE COOKIES