Ulubione

Najedź, aby powiększyć

Cyfrowy miernik ciśnienia oleju z czujnikiem dla samochodu samochodowego 52mm 2-calowy LCD 0 ~ 120PSI Ostrzeżenie Light Black

Cyfrowy miernik ciśnienia oleju z czujnikiem dla samochodu samochodowego 52mm 2-calowy LCD 0 ~ 120PSI Ostrzeżenie Light Black

Cena dotyczy tylko aplikacji:

Masz już aplikację TOMTOP

Skanuj kod produktu, aby kupić bezpośrednio!

Uwaga: Proszę zaktualizować aplikację TOMTOP do najnowszej wersji.

Nie masz APP TOMTOP

Pobierz bezpłatnie i skorzystaj z dodatkowych ofert!

Statek z:
  • Chiny Magazyn
  • US Magazyn
  • Magazyn w Wielkiej Brytanii
Wybierz magazyn
Wysyłka:
Zazwyczaj będzie dostarczany w dni roboczych godzin
Wysyłka:
Żądanie nie powiodło się! Proszę spróbuj ponownie.
Niestety, wydaje się, że nie istnieją dostępne metody wysyłki dla danej lokalizacji.Proszę Skontaktuj się z nami w celu uzyskania pomocy.

Załadunek...

Dostawa do

United States
Zdjęcie w: china

kolor:

Proszę wybrać kolor
QTY:

Special discount has ended

Please note each user for only 1 item(s)

Przed Sprzedaż Dodaj do koszyka Obecnie brak na stanie

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!

Email:

Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice
Dodaj do ulubionych

Ochrona kupującego

  • Pełen zwrot kosztówJeśli nie otrzymasz zamówienia
  • Pełny lub częściowy zwrot pieniędzy , Jeśli przedmiot nie jest zgodny z opisem Ucz się więcej >
Cechy:
Cyfrowy wyświetlacz z czarną twarzą i niebieską diodą LED.
Służy do pomiaru ciśnienia oleju w samochodzie.
Zakres pomiarowy wynosi 0 ~ 120PSI.
Czerwone światło ostrzegawcze.
Wysoka dokładność i łatwość obsługi.

Dane techniczne:
Czarny kolor
Rozmiar wyświetlacza LCD: 52mm / 2in
Jednostka: PSI
Zakres pomiarowy: 0 ~ 120PSI
Punkt ostrzegawczy: 10.5PSI
Moc: 12V DC, maks. 0.3A
Gwint mocujący czujnik: NPT 1/8 "
Rozmiar miernika ciśnienia oleju: 5,7 * 5.5cm / 2.2 * 2.2in (średnica * wysokość)
Rozmiar czujnika: 4,5 * 7 cm / 1,8 * 2,8 cala (średnica * wysokość)
Masa czujnika: 130g / 4,6oz
Wielkość opakowania: 17 * 12 * 7.8cm / 6.7 * 4.7 * 3.1in
Waga opakowania: 342g / 12oz

Pakiet zawiera:
1 * Miernik ciśnienia oleju
1 * Czujnik ciśnienia oleju

Pytania i odpowiedzi klientów

Sortować:
0
Q

Part number for sending unit? Purchased this gauge but the sending unit does not work. No continuity between sensor output and sender body (ground).

A
  • good morning Mine works but has leak in sensor connector

    By Antonio M. on April 15, 2018

(1)
0
Q

Is this mechanical or electric guage

A
  • It runs of oil pressure sending unit, I used in a mustang Ministock and it worked out well for me

    By matthew briggs on April 4, 2018

(2)
0
Q

Is the sending unit the same for fuel?

A
  • Yes

    By Jonathan on March 12, 2018

0
Q

How well can you see these in direct sunlight? Planning to install in a Jeep but I run topless all summer.

A
  • Mine are in a Sand Rail. Easy to see, they look awesome!

    By Charles Shumard on March 4, 2018

(1)
0
Q

How tolerant is this unit to electrical voltage? My golf cart can run up to 18 volts and I want to use it on the Cart.

A
  • Mine worked for 4 days and nothing now junk

    By Launcelot on February 23, 2018

0
Q

Do you need a oil pressure sensor for the gauge?

A
  • No you dont it comes in the box very cool gauges i have them on my jeep

    By Homero N. on October 25, 2017

0
Q

Hi is the oil pressure gauge comparable for a Subaru wrx Impreza 04 I'm trying to make a good decision on mounting them on my subie.

A
  • Yes I think so just as long as it had an oil light switch

    By andrew on October 8, 2017

(1)
0
Q

When engine is kinda cold, the gauge works fine but when engine warms the oil press gauge drops to 0, I have checked the wiring - OK Any ideas?

A
  • If you have installed correctly. Eitger the gauge os not accurate or broke. Or you have an internal engine problem....bearings going bad? If i was you...take the gauge back out and imstall a manual gauge to verify you have oil pressure

    By Derek R. on September 16, 2017

(2)
0
Q

Whats warrnty on these i bought last aug and they dont work

A
  • Junk comes with junk warranty.bought 1sr set same didnt work. Thought it had to be pressure sensor so bought a 2nd just for spare sensor replaced still junk.cut your losses and buy a better product.

    By bill on July 15, 2017

0
Q

Does it come with mounting hardware

A
  • Idk about this one the tach did. But is really bright at night.

    By Danny Russell on June 9, 2017

(2)

Dyskusje

Opublikuj nowy temat

Pamiętaj, że Forum TOMTOP to społeczność pomagająca wymieniać się pomysłami i pomagać w poszukiwaniu, podczas których entuzjastyczni technicy będą uczestniczyć w dyskusji, tymczasem obsługa klienta TOMTOP (z ikoną obsługi klienta Tomtop) będzie odpowiadać na czas, z tą samą funkcją, co kontakt na http : //www.tomtop.com/contacts

otwórz to forum na całej stronie
Opinie klientów

Średnia ocena:

4.4

oparte na 192 Opinie klientów

  • 5 gwiazdy
    31%
  • 4 gwiazdy
    68%
  • 3 gwiazdy
    1%
  • 2 gwiazdy
  • 1 gwiazdy

Podziel się swoją opinią z innymi klientami i uzyskać Tomtop punkty, pierwsze 5 opinii dostać DOUBLE Tomtop Punkty!

Napisz Recenzję
  • By John L

    December 30, 2017

    Gauge worked on the first try, ran the green wire to tach output off the coil on a 350 TBI. It won't read any rpm until the engine is actually running, not sure if that's my truck or the gauge.. But it seems to react reasonably quick and read accurately. The gauge pod is very cheap though and mine was missing the back side of the nut, so I had to drill it out and make a new nut/bolt... But still a cheap way to add a tach to a truck. Update, now that i wired the LED backlight, it is WAY too bright for nightime use, I wish there was a way to dim the backlight some, I wired mine to a switch so I can turn it on and off. Also you can combine the two black negative leads (one for the tach and one for the LED) at the same spot, works fine and makes wiring a bit easier

    Is this helpful? (0) (0)

  • By U***A

    September 28, 2017

    Not sure why some other reviews show pictures of a gauge with a needle, but mine arrived and looks just like the one advertised. The digital display is a bit bright, but there is no "Backlight" as others have mentioned. An LED dimmer will NOT work with this type of unit (as another review had mentioned). You need 12 volts to power this up, and a dimmer adjusts the voltage to the gauge and will not allow it t work properly (I tried and failed). So DO NOT buy a dimmer for this unit. Instead, find a lens cover or simply add some window tint to it. I have mine on a switch so that I can turn it off at night if need be. I bought the oil pressure switch to monitor my fuel pressure in a 6 liter Powerstroke. It does come with a sending unit that will fit into your fuel filter housing. You will need to purchase some adapters, which are super cheap. This unit was very well priced for what you get, and is accurate.

    Is this helpful? (0) (0)

  • By t***L

    August 13, 2017

    The tach works good really good but the back light is way to bright even when hooked into the factory dimmer switch instalation was about 3 hours because instructions where limited and resorces online for my specific vehicle where limited when trying to find schematics for my factory dimmer switch and like many have stated the back light is wayyyyy to bright they would of been better off using a regular dash bulb for this thing think im just gonna cut the back light wires and leave it as a none back lite tach over all for the price of this thing its definitly worth it

    Is this helpful? (0) (0)

  • By Dave H

    July 31, 2017

    Nice little tach for the money. I felt that the instructions were lacking quite a bit, but I was able to figure it out. There are two long red and black wires - these provide power. The red should be hooked to a 'key hot' wire. There are two shorter red and black wires - these are for the backlight. The red wire here should be hooked to a wire that gets hot when the parking lights are turned on. Finally the long green wire needs to be hooked to the signal for the distributor. For my Chevy HEI ignition, this was a wire directly to the distributor cap. The response of the needle is nice and smooth, not choppy or jittery. The backlight is a very bright blue. The bezel is just ok, the holes in the back of it for the wires to pass through are on the wrong side for how I have it mounted (base down to the top of my dash). This seems wierd to me, the wires come out of the top of the tach itself when oriented upright. Didn't seem to cause any problems though.

    Is this helpful? (0) (0)

  • By Robert

    July 19, 2017

    Not sure why some other reviews show pictures of a gauge with a needle, but mine arrived and looks just like the one advertised. The digital display is a bit bright, but there is no "Backlight" as others have mentioned. An LED dimmer will NOT work with this type of unit (as another review had mentioned). You need 12 volts to power this up, and a dimmer adjusts the voltage to the gauge and will not allow it t work properly (I tried and failed). So DO NOT buy a dimmer for this unit. Instead, find a lens cover or simply add some window tint to it. I have mine on a switch so that I can turn it off at night if need be. I bought the oil pressure switch to monitor my fuel pressure in a 6 liter Powerstroke. It does come with a sending unit that will fit into your fuel filter housing. You will need to purchase some adapters, which are super cheap. This unit was very well priced for what you get, and is accurate.

    Is this helpful? (0) (0)

  • By Andrew J. Rudlang

    July 12, 2017

    Works pretty good, looks nice. Heads up to anyone with a three cylinder car like a geo metro or chevy sprint, there is a potentiometer on the circuit board which allows enough adjustment of the resistance to make this read properly for a three cylinder car. If you have access to a scope and square wave generator and other cool equipment you can dial it in precise although the POT is a bit touchy. If you just want it roughly close then put it in 6 cylinder mode and hook up to your car, get someone with a steady foot to rev the engine until the gauge reads 1500 (which should be 3000 RPM on your 3 cylinder) then switch it for 4 cylinder mode and adjust the POT until the gauge shows 3000 RPM. Full disclaimer that is just an idea for those without the fancy equipment my electrical engineering friend had, we went the cope+square wave generator route.

    Is this helpful? (0) (0)

  • By Tanya Ferguson

    June 13, 2017

    Two out of three of these worked well. I put one in my 1955 jeep last year, and it is very nice to see exactly how much oil pressure. The old jeep has oil pressure issues and is in need of a rebuild on the motor so this gauge helps me watch things until I can get it taken apart. The gauge seems accurate as I compare to the old gauge. This year, ordered one for my 1946 cj2a jeep. It worked for about 1 minute. I just rebuilt the motor and I NEED to see the oil pressure to ensure all is well. I dis-assembled the gauge and found the Voltage regulator pop'd. I was hoping for a bad solder joint or something. Anyways, I ordered a 3rd and that one arrived in two days. I postponed my first time startup on the rebuilt engine until I had a gauge. Connected the 3rd one and It has been working every since. The one that blew was not cross wired...it worked then just went out. Not sure what to make of the one bad gauge out of the three I ordered.

    Is this helpful? (0) (0)

  • By Arthur Senior

    June 11, 2017

    I bought this because I wanted a engine tach for both of my tractors, however this tach is designed for vehicles and will accommodate a 4 cylinder, 6 cylinder, or 8 cylinder engine. Install was pretty simple, red wires to ignition positive, black wires to ground, green wire to the negative side of engine coil. Then I screwed the gauge down onto the dash. Installing on a vehicle is exactly the same. I love the pretty blue glow from the gauge light, and best of all, the gauge is very responsive! When idling, the needle on the gauge stays right at the RPM it should be and won't jump around like a race horse unless your engine is jumping around lol. While reving the engine, I get an instant response from the gauge, definitely a lot quicker then some digital tach's ive seen. The gauge isn't too big in size, about 2" or so, which means it can fit within a small space, unlike the big 5" gauges. Highly recommended.

    Is this helpful? (0) (0)

  • By Nico C.

    June 12, 2017

    I installed this tach in my '80 suburban to find out my rear axle gear ratio lol. Works like a charm and what I suspected: 3.73s. The gauge housing that was included bolted to the dash faceplate perfectly.The needle shows RPMs smooth, not jumping around. Yes the blue light is bright at night, not so noticeable in the day light. Overall very good for the price. Only downside is the bulb cant be changed for a different color.

    Is this helpful? (0) (0)

  • By l***2

    November 28, 2017

    Item was exactly what I expected, perfect fit for my HD.

    Is this helpful? (0) (0)

  • By johnny

    August 30, 2017

    This thing worked great for my ranger ..it's bright so I cut some left over window tint and put it on the glass ..even better

    Is this helpful? (0) (0)

  • By Angela Mangum

    February 17, 2017

    Very easy to install. Only complaint is that it is very bright when driving at night. Needs a way to dim it.

    Is this helpful? (0) (0)

  • By k***f

    October 17, 2015

    GREAT THANKS

    Is this helpful? (0) (0)

  • By c***f

    September 27, 2015

    Just as advertised. Shipped quickly. Great seller! THANKS!!!

    Is this helpful? (0) (0)

  • By d***2

    September 21, 2015

    Excellent seller

    Is this helpful? (0) (0)

  • By w***1

    September 12, 2015

    Excellent service and a fast delivery

    Is this helpful? (0) (0)

  • By j***t

    August 28, 2015

    Great thank you

    Is this helpful? (0) (0)

  • By c***5

    April 17, 2015

    Thanks I appreciate the good and fast service

    Is this helpful? (0) (0)

  • By s***3

    February 25, 2015

    item new as described, smooth transaction, recommended seller.

    Is this helpful? (0) (0)

  • By s***2

    December 10, 2014

    Great thank you

    Is this helpful? (0) (0)

Hot Event Jeszcze

Najlepsi sprzedawcy Jeszcze

Please activate your account and then to buy,We will resend the activation email to help you complete your registration.

Recently Viewed

NASZE STRONY UCHWYTU PLIKÓW COOKIE

TOMTOP wykorzystuje pliki cookie, aby zapewnić najlepszą jakość zakupów. Jeśli będziesz nadal korzystać z naszych usług lub założyć nowe konto, założymy, że akceptujesz naszą Politykę prywatności.