autumn-sale

Ulubione

Najedź, aby powiększyć

Cyfrowy miernik doładowania Turbo Gauge z czujnikiem dla Auto Car 52mm 2W LCD -14 ~ 29 PSI Warning Light Black

Cyfrowy miernik doładowania Turbo Gauge z czujnikiem dla Auto Car 52mm 2W LCD -14 ~ 29 PSI Warning Light Black

Cena dotyczy tylko aplikacji:

Masz już aplikację TOMTOP

Skanuj kod produktu, aby kupić bezpośrednio!

Uwaga: Proszę zaktualizować aplikację TOMTOP do najnowszej wersji.

Nie masz APP TOMTOP

Pobierz bezpłatnie i skorzystaj z dodatkowych ofert!

Statek z:
  • Chiny Magazyn
Wybierz magazyn
Wysyłka:
Zazwyczaj będzie dostarczany w dni roboczych godzin
Wysyłka:
Żądanie nie powiodło się! Proszę spróbuj ponownie.
Niestety, wydaje się, że nie istnieją dostępne metody wysyłki dla danej lokalizacji.Proszę Skontaktuj się z nami w celu uzyskania pomocy.

Załadunek...

Dostawa do

United States
Zdjęcie w: china

kolor:

Proszę wybrać kolor
QTY:

Każdy użytkownik może kupić tylko 5 Kawałek

Special discount has ended

Please note each user for only 1 item(s)

Przed Sprzedaż Dodaj do koszyka Obecnie brak na stanie

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!

Email:

Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice

Ochrona kupującego

  • Pełen zwrot kosztówJeśli nie otrzymasz zamówienia
  • Pełny lub częściowy zwrot pieniędzy , Jeśli przedmiot nie jest zgodny z opisem Ucz się więcej >
Cechy:
Cyfrowy wyświetlacz z czarną twarz i niebieskie diody LED.
Służy do pomiaru ciśnienia turbo samochodowym.
Zakres pomiarowy wynosi -14 ~ 29PSI.
Czerwona lampka ostrzegawcza.
Wysoka dokładność i łatwa obsługa.

Specyfikacja:
Czarny kolor
Rozmiar LCD: 52mm / 2W
Jednostka: PSI
Zakres pomiarowy: -14 ~ 29PSI
Punkt Ostrzeżenie: 21PSI
Zasilanie: 12V DC, max. 0.3A
Długość węża PVC: 176cm / 70in
Turbo Boost gauge rozmiar: 5,7 * 5.5cm / 2.2 * 2.2in (średnica * wysokość)
Turbo Boost gauge waga: 70g / 2,5 uncji
Wielkość opakowania: 17 * 12 * 7.8cm / 6.7 * 4.7 * 3.1in
Waga wraz z opakowaniem: 236g / 8,3 uncji

Pakiet w tym:
1 * Wskaźnik doładowania
1 * Czujnik
1 * Wąż PVC
1 * T-Fitting
1 * Filtr powietrza

Pytania i odpowiedzi klientów

Sortować:
0
Q

will this work on a super charger

A
  • Yes it is just looking for air pressure or vacuum in the intake.

    By John akers on April 18, 2018

0
Q

Will it work for mazdaspeed 3 2007

A
  • Yes but I recommend a higher quality unit this is sort of cheap and mine died after 6 months.

    By John akers on April 15, 2018

0
Q

Will this fit my 2005 dodge neon srt4

A
  • As long as you have a 52mm or 2inch gauge pod it will fit. Please read the instructions to save time in wiring it correctly.

    By Daniel McCullough on July 11, 2017

(1)
Q

If i just connext it to ground and power will it show numbers ?

A
  • It will show you at zero if it dose not have a manifold reference. Run the line to the intake manifold after the throttle body. At least if it’s hooked up you can watch the manifold vacuum.

    By John akers on June 11, 2018

Dyskusje

Opublikuj nowy temat

Pamiętaj, że Forum TOMTOP to społeczność pomagająca wymieniać się pomysłami i pomagać w poszukiwaniu, podczas których entuzjastyczni technicy będą uczestniczyć w dyskusji, tymczasem obsługa klienta TOMTOP (z ikoną obsługi klienta Tomtop) będzie odpowiadać na czas, z tą samą funkcją, co kontakt na http : //www.tomtop.com/contacts

otwórz to forum na całej stronie
Opinie klientów

Średnia ocena:

4.6

oparte na 93 Opinie klientów

  • 5 gwiazdy
    59%
  • 4 gwiazdy
    41%
  • 3 gwiazdy
  • 2 gwiazdy
  • 1 gwiazdy

Podziel się swoją opinią z innymi klientami i uzyskać Tomtop punkty, pierwsze 5 opinii dostać DOUBLE Tomtop Punkty!

Napisz Recenzję
  • By Andrew J. Rudlang

    January 3, 2018

    Works pretty good, looks nice. Heads up to anyone with a three cylinder car like a geo metro or chevy sprint, there is a potentiometer on the circuit board which allows enough adjustment of the resistance to make this read properly for a three cylinder car. If you have access to a scope and square wave generator and other cool equipment you can dial it in precise although the POT is a bit touchy. If you just want it roughly close then put it in 6 cylinder mode and hook up to your car, get someone with a steady foot to rev the engine until the gauge reads 1500 (which should be 3000 RPM on your 3 cylinder) then switch it for 4 cylinder mode and adjust the POT until the gauge shows 3000 RPM. Full disclaimer that is just an idea for those without the fancy equipment my electrical engineering friend had, we went the cope+square wave generator route.

    Is this helpful? (0) (0)

  • By John L

    December 29, 2017

    Gauge worked on the first try, ran the green wire to tach output off the coil on a 350 TBI. It won't read any rpm until the engine is actually running, not sure if that's my truck or the gauge.. But it seems to react reasonably quick and read accurately. The gauge pod is very cheap though and mine was missing the back side of the nut, so I had to drill it out and make a new nut/bolt... But still a cheap way to add a tach to a truck. Update, now that i wired the LED backlight, it is bright for nightime use. I wired mine to a switch so I can turn it on and off. Also you can combine the two black negative leads (one for the tach and one for the LED) at the same spot, works fine and makes wiring a bit easier

    Is this helpful? (0) (0)

  • By A***p

    September 28, 2017

    looks just like the one advertised. The digital display is a bit bright, but there is no "Backlight" as others have mentioned. An LED dimmer will NOT work with this type of unit (as another review had mentioned). You need 12 volts to power this up, and a dimmer adjusts the voltage to the gauge and will not allow it t work properly (I tried and failed). So DO NOT buy a dimmer for this unit. Instead, find a lens cover or simply add some window tint to it. I have mine on a switch so that I can turn it off at night if need be. I bought the oil pressure switch to monitor my fuel pressure in a 6 liter Powerstroke. It does come with a sending unit that will fit into your fuel filter housing. You will need to purchase some adapters, which are super cheap. This unit was very well priced for what you get, and is accurate.

    Is this helpful? (0) (0)

  • By p***c

    August 13, 2017

    The tach works good really good but the back light is way to bright even when hooked into the factory dimmer switch instalation was about 3 hours because instructions where limited and resorces online for my specific vehicle where limited when trying to find schematics for my factory dimmer switch and like many have stated the back light is wayyyyy to bright they would of been better off using a regular dash bulb for this thing think im just gonna cut the back light wires and leave it as a none back lite tach over all for the price of this thing its definitly worth it

    Is this helpful? (0) (0)

  • By Tanya Ferguson

    August 12, 2017

    I put one in my 1955 jeep last year, and it is very nice to see exactly how much oil pressure. The old jeep has oil pressure issues and is in need of a rebuild on the motor so this gauge helps me watch things until I can get it taken apart. The gauge seems accurate as I compare to the old gauge. This year, ordered one for my 1946 cj2a jeep. It worked for about 1 minute. I just rebuilt the motor and I NEED to see the oil pressure to ensure all is well. I dis-assembled the gauge and found the Voltage regulator pop'd. I was hoping for a bad solder joint or something. Anyways, I ordered a 3rd and that one arrived in two days. I postponed my first time startup on the rebuilt engine until I had a gauge. Connected the 3rd one and It has been working every since. The one that blew was not cross wired...it worked then just went out.

    Is this helpful? (0) (0)

  • By Dave H

    August 1, 2017

    Nice little tach for the money. There are two long red and black wires - these provide power. The red should be hooked to a 'key hot' wire. There are two shorter red and black wires - these are for the backlight. The red wire here should be hooked to a wire that gets hot when the parking lights are turned on. Finally the long green wire needs to be hooked to the signal for the distributor. For my Chevy HEI ignition, this was a wire directly to the distributor cap. The response of the needle is nice and smooth, not choppy or jittery. The backlight is a very bright blue. The bezel is just ok, the holes in the back of it for the wires to pass through are on the wrong side for how I have it mounted (base down to the top of my dash). This seems wierd to me, the wires come out of the top of the tach itself when oriented upright. Didn't seem to cause any problems though.

    Is this helpful? (0) (0)

  • By Arthur Senior

    June 4, 2017

    I bought this because I wanted a engine tach for both of my tractors, however this tach is designed for vehicles and will accommodate a 4 cylinder, 6 cylinder, or 8 cylinder engine. Install was pretty simple, red wires to ignition positive, black wires to ground, green wire to the negative side of engine coil. Then I screwed the gauge down onto the dash. Installing on a vehicle is exactly the same. I love the pretty blue glow from the gauge light, and best of all, the gauge is very responsive! When idling, the needle on the gauge stays right at the RPM it should be and won't jump around like a race horse unless your engine is jumping around lol. While reving the engine, I get an instant response from the gauge, definitely a lot quicker then some digital tach's ive seen. The gauge isn't too big in size, about 2" or so, which means it can fit within a small space, unlike the big 5" gauges. Highly recommended.

    Is this helpful? (0) (0)

  • By Daktah Pepah

    October 22, 2017

    bought this for my 1 cylinder go kart engine. checked it with a laser tach i verified against my car (was less than 25 rpm off) and in 4 cylinder mode it seems fairly accurate at idle and redline, less than 100 rpm difference each. i bought a pack of resistors because i thought i would have to make it more accurate

    Is this helpful? (0) (0)

  • By Robert Humbert

    August 14, 2017

    Just what I wanted. High recommended

    Is this helpful? (0) (0)

  • By James

    August 10, 2017

    Does not work with my scooter, but that's my fault for not reading. Does look cool though.

    Is this helpful? (0) (0)

  • By ezequiel arce

    June 9, 2017

    Thank

    Is this helpful? (0) (0)

  • By Ralph

    June 8, 2017

    Great tach and really looks good in my car.

    Is this helpful? (0) (0)

  • By Michael Coots

    May 1, 2017

    Works very well for the area I needed to put it

    Is this helpful? (0) (0)

  • By Yoleida Quiro

    April 28, 2017

    Excellent product. It works well. I like the blue light. It's bright at night.

    Is this helpful? (0) (0)

  • By nate

    April 22, 2017

    Good product. Just what I wanted.

    Is this helpful? (0) (0)

  • By 4***o

    September 28, 2015

    working good thank you

    Is this helpful? (0) (0)

  • By l***9

    March 28, 2015

    Thank You

    Is this helpful? (0) (0)

  • By c***0

    February 24, 2015

    Many thanks fast service well packed

    Is this helpful? (0) (0)

  • By e***c

    January 24, 2015

    Good

    Is this helpful? (0) (0)

  • By a***5

    January 23, 2015

    .

    Is this helpful? (0) (0)

Hot Event Jeszcze

Najlepsi sprzedawcy Jeszcze

Please activate your account and then to buy,We will resend the activation email to help you complete your registration.

Ostatnio oglądane

NASZE STRONY UCHWYTU PLIKÓW COOKIE

TOMTOP wykorzystuje pliki cookie, aby zapewnić najlepszą jakość zakupów. Jeśli będziesz nadal korzystać z naszych usług lub założyć nowe konto, założymy, że akceptujesz naszą Politykę prywatności.