Ulubione

Najedź, aby powiększyć

Panel słoneczny MPPT Regulator ładowania baterii Kontroler z kolorowy wyświetlacz LCD 24/36/48/60 / 72V 10A Kompatybilne DC-DC Zwiększ funkcja ładowania

Panel słoneczny MPPT Regulator ładowania baterii Kontroler z kolorowy wyświetlacz LCD 24/36/48/60 / 72V 10A Kompatybilne DC-DC Zwiększ funkcja ładowania

Cena dotyczy tylko aplikacji:

Masz już aplikację TOMTOP

Skanuj kod produktu, aby kupić bezpośrednio!

Uwaga: Proszę zaktualizować aplikację TOMTOP do najnowszej wersji.

Nie masz APP TOMTOP

Pobierz bezpłatnie i skorzystaj z dodatkowych ofert!

Statek z:
  • Chiny Magazyn
  • Niemcy Magazyn
Wybierz magazyn
Wysyłka:
Zazwyczaj będzie dostarczany w dni roboczych godzin
Wysyłka:
Żądanie nie powiodło się! Proszę spróbuj ponownie.
Niestety, wydaje się, że nie istnieją dostępne metody wysyłki dla danej lokalizacji.Proszę Skontaktuj się z nami w celu uzyskania pomocy.

Załadunek...

Dostawa do

United States
Zdjęcie w: china
QTY:

Special discount has ended

Please note each user for only 1 item(s)

Przed Sprzedaż Dodaj do koszyka Obecnie brak na stanie

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!

Email:

Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice
Dodaj do ulubionych

Dzielić:

MPPT oznacza Maksymalna Power Point Tracking (MPPT), MPPT Regulator ładowania solarnego jest modernizacja tradycyjnego produktu. generujący napięcie MPPT wykrywania w czasie rzeczywistym panele słoneczne śledzić bieżące (vi) najwyższego napięcia i testowanie modułu elektrycznego poprzez rozszerzenie stanu pracy, tak że maksymalna moc systemu, aby naładować baterię. Regulator MPPT stosowane w systemach fotowoltaicznych, koordynacja panele słoneczne do ładowania akumulatora, jest mózgiem systemu fotowoltaicznego.
Kontroler wykorzystuje algorytm aktywnego zaawansowane oprogramowanie do szybkiego i dokładnego śledzenia maksymalnego punktu mocy fotowoltaicznej napięcia modułu panele, aktywnego śledzenia pracy przy maksymalnym punkcie zasilania modułu ogniw słonecznych w celu uzyskania większej ilości energii słonecznej. Zwiększenie prądu i mocy ładowania pokolenia.

Cechy:
Zastosowanie do 24V / 36V / 48V / 60V / 72V systemu akumulatora, użytkownik może ustawić napięcie wyjściowe i prąd w zależności od rzeczywistych potrzeb.
Innowacyjna technologia MPPT, wysoka wydajność śledzenia, które mogą poprawić wytworzonej energii.
Szybki i projektowania wysokiej klasy, doskonale nadaje się do użytku ładowania słonecznego.
Doskonałe zdolności rozpraszania ciepła: przyjmuje zaawansowanej technologii kontroli temperatury wentylator do szybkiej kontroli ciepła.
Obudowa ze stopu aluminium i przenośny rozmiar, trwała do użytku.
Prosty interfejs Operacja: jasny kolor LCD wyświetla aktualną, prąd, moc, czas ładowania, itp
Tryby pracy: MPPT i DC-DC do wyboru, MPPT do zastosowania paneli fotowoltaicznych i DC-DC dla zasilania doładowania.
Wybór ładowania: dotyczy baterii litowej i ogniwa akumulatora.
Wbudowany w 20 grup danych przez użytkownika, aby ustawić i zapisać, wsparcie dla wielu celów.
Max. Moc wyjściowa wynosi 600W, najlepiej nadaje się do 100W-600W kolektorów słonecznych; większa moc, efekt MPPT jest bardziej oczywista.
Zabezpieczenie przed odwrotną ładowania: unikać komórkę akumulatora odwrotnie naładować baterię słoneczną.
Zabezpieczenie przed odwrotną łączący: MOS odwrócić obwód ochronny dla wejścia i wyjścia do końca skutecznie zabezpieczyć regulator i akumulator.
Zabezpieczenie przed przeciążeniem: regulator automatycznie odcięty obwód razie przeciążenia.
Szeroki zakres zastosowań: do przechowywania i ładowania akumulatora Akumulator litowy, domu system zasilania PV, latarni słoneczna, itp

Specyfikacja:
Kolor: zielony
Materiał: Stop aluminium
Wyświetlacz: 160 * 128 kolorowy wyświetlacz LCD
Napięcie wejściowe: DC 12-60V
Napięcie wyjściowe: DC 15-90V, Regulowana pomieścić 24V / 36V / 48V / 60V / 72V baterii
Prąd wyjścia: 0-10A Regulowany
Moc wyjściowa: 20-600W
Tryby pracy: MPPT i DC-DC
Element Rozmiar: 131 * 96 * 55mm / 5,2 * 3,8 * 2.2in
Pozycja Waga: 384g / 13,56 uncji
Rozmiar opakowania: 145 * 85 * 105mm / 5,7 * 3,3 * 4.1in
Opakowanie Waga: 480g / 17 uncji

Lista Opakowanie:
1 * MPPT Solar Charge Controller
1 * Instrukcja obsługi (w języku angielskim)

pytanie Odpowiedź

  • Q Please advise when this item will be available. Today it shows its on special but also shows no stock?

    By Nico Bosman February 24, 2018

    A Sorry for the discontinuation of this product.

    Reply By Customer Service Center February 27, 2018
  • Q Good day Please advise when you will have this product available again MPPT Solar Panel Battery Regulator Charge Controller with LCD Color Display 24/36/48/60/72V 10A Compatible DC-DC Boost Charge Function Thank you

    By Nico Bosman February 20, 2018

    A Sorry for the discontinuation of this product.

    Reply By Customer Service Center February 27, 2018
Opinie klientów

Średnia ocena:

4.6

oparte na 21 Opinie klientów

  • 5 gwiazdy
    57%
  • 4 gwiazdy
    43%
  • 3 gwiazdy
  • 2 gwiazdy
  • 1 gwiazdy

Podziel się swoją opinią z innymi klientami i uzyskać Tomtop punkty, pierwsze 5 opinii dostać DOUBLE Tomtop Punkty!

Napisz Recenzję
  • By One_of_Many

    November 29, 2017

    I use this boost converter to help charge my 24-volt battery bank from the 18-volt solar panel input to my grid tie inverter. During the day with Sun on my solar modules my 24-volt battery is mainly charged by a Tracer charge controller on dedicated solar panels. My shop / Man Cave is run by solar --> batteries --> inverter only. I set this boost converter to help with short duration high demand during the day and use an AC power supply as input to the unit at night to charge the batteries. I am on peak power with the power company from noon to 7:00 pm and run on batteries during this period and fully recharge the batteries after 7:00 pm. This power program currently saves me over $80.00 a Month on my power bill in the high desert with two large evaporative coolers on thermostats. Pros: The unit works, it is easy to program, multiple program sets can be stored for easy retrieval, the display brightness level can be adjusted and the display can be turned off while the unit is in the ON state. The noisy fan level can be adjusted, I set mine at minimum and it runs cool. Cons: The unit does not lock in the power (APL) and searches constantly while on solar, this searching moves the voltage and current around constantly also. If the solar panels cannot supply the needed current (set) then the unit drops power to zero and starts ramping up again, this is inefficient. While in constant current mode (cc) the unit many times does not maintain the programmed current, cc should be the priority and rock solid. At times I find I have to turn the unit off and back on to correct the issue. The fan is very noisy -- (My Tracer charge controller handles many amps of current with no fans or noise).

    Is this helpful? (0) (0)

  • By Chris

    September 27, 2017

    Read other reviews for general overview of the unit. I wanted to just make sure to point out one important thing. I would not recommend adjusting the fan speed setting. At default fan runs on high which is loud and speed exceeds my application needs for cooling as I'm limiting the output current to 3.5amps. However when you reduce the fan speed the unit has an issue in which it reads the input voltage. The lower you reduce the fan speed the greater the fluctuation in voltage the unit reads. The serious issue I observed as a result is the output voltage to my battery jumped wildly for 20v to exceed 60v and back and forth rapidly. The upper voltage swings also exceeded the voltage output setting. This was obviously of great concern as it would ruin the battery or worse as I had it on a lithium ion pack (potential of fire!). Every other aspect of the unit runs as expected as long as you don't reduce the fan speed setting. As every other aspect of the unit works correctly my assumption is this isn't a faulty unit rather a design flaw, however that is my assumption. I did not return and test another unit as restoring the fan speed to the default high speed resolved the issue.

    Is this helpful? (0) (0)

  • By WDizzle

    September 20, 2017

    If you are trying to charge high voltage lithium ion batteries using commonly available solar panels this unit is about the only thing I have found that will do that. And it does it well most of the time. The one major issue with it is even the tiniest dip in solar panel output will cause the unit to reset. Its so sensitive to this that even a bird flying over the panel causing the most minute amount of shade for a brief moment will cause it to reset. When it resets it takes a good 5-7 seconds for it to begin charging again. So if you have alot of rolling clouds and sun, this can make it a lot less efficient than a higher quality MPPT controller. However, for the price I paid for it and its capabilities, its still an amazing value. In good summer sun with a cloud here and there I can get a 52v 11.5 battery charged in 2 days off a 100w panel. Not bad at all! *There are some youtube videos floating around showing where people have replaced the input capacitors with bigger ones to help with the reset issue. I haven't tried this yet but I might order another one and attempt to mod this thing.

    Is this helpful? (0) (0)

  • By Sean Maddox

    March 21, 2017

    Relatively confusing setup and the manual really isn't clear; however, for 37$ this thing is amazing. Ensure a few things: 1. Be sure your solar panel voltage is lower than charged battery voltage. The actual panel output is the lowest max charge voltage you will get, regardless of settings. 2. Minimum 24v battery voltage. Seems to always boost at least to 24v. 3. SET the ON state. If you don't you will have to turn it on every morning. This little bugger really gets the job done on a dime. I average about 200w charging output during the day from 9am- 3pm in my area, it's a great little charger for a small system. I use it to power 100w of pond pumps and some led landscape lighting, and automatic irrigation. Be aware that the battery charge level indicator lies, it basically just measures number of amp hours charged. You have to sort of set the AH setting to the total AH discharge over night for your load for it to be useful at all, and that is only very rough in case of extended low power cycles (cloudy days). Invest in a charge meter/bilt meter display for your batteries, And a buck converter to run 12v loads. Still, you're all- in a 250w system for 60$ plus batteries.

    Is this helpful? (0) (0)

  • By New Quilter

    March 20, 2017

    Shipped rather quickly and did what I needed it to do, I have only used it for a day and will update if it fails in the near future but so far I'm pleased. This thing is cheap and allows for higher voltage panels (mine is 75w but 55.5 volts) to be used with lower voltage banks or for higher voltage banks and lower voltage panels. This is DIRT CHEAP and there is no need for poking at the flaws as it's very functional even if the user interface isn't super intuitive. O have not however gotten it to convert the excess voltage into amps like my MPPTs do, I guess I will poke around in the settings more to see if that's an option.

    Is this helpful? (0) (0)

  • By pacapo

    March 17, 2017

    This item is more suited for 24 volt or above storage batteries in a solar system. It has a lot of bells and whistles. You will have to study the You Tube videos to understand all the settings. It can be used to charge a lead acid battery, but is more suited for delicate charging of lithium ion batteries which use the constant current/constant voltage (CC/CV) cycle to properly charge. Docooler sold us the unit at a reasonable price. It is not well understood, so plan on studying it well. The manual isn't that easy to understand.

    Is this helpful? (0) (0)

  • By Comqter

    March 14, 2017

    I use this to charge a 52v nominal lithium-ion battery pack up to around 56-58 volts using CC/CV. It works pretty well. I recommend checking out some YouTube reviews from Julian Ilett about it -- he has 3 videos on how to use it and it's easier to learn from the videos than by trying to decipher the instructions on eg setting the charger to stay on if power is momentarily interrupted. The controller resets sometimes if there is a change in input voltage (clouds), so having it continue to charge after resetting is critically important. While I use a 12v 100 watt solar panel as the input power supply, you can use any DC power source with a lower voltage than your output power. So for example you could use a common 12v DC power supply to charge a higher-voltage battery bank, and if you have multiple devices with different voltages, you can configure this to charge them all. Great value for the money.

    Is this helpful? (0) (0)

  • By Mr.FixIt

    March 14, 2017

    Great charge controller, just don't believe the reviews that say it works with a single 12v battery, it does not. It will constantly try to put at least 20v into it when the sun is out, which would overcharge a 12v battery quite fast. As for 24v use, this unit is awesome. Truly a MPPT charge that keeps charging as the sun is setting, amazing! TONS of features and love the color screen. Just don't think you can use it on a 12v battery even though the specs may make it seem like it COULD...it won't. 24 volt and up and your golden!

    Is this helpful? (0) (0)

  • By Ed

    March 9, 2017

    A lot of people don't understand how this thing works, and thus negative reviews when it doesn't do what they were hoping. It doesn't help that the manual is poor, the specs don't fully explain everything, and that this is essentially the first boost converter MPPT on the market (most MPPT controllers are expensive buck converters or simply non-MPPT PWM charge cut off devices). This genuine MPPT controller uses a DC-DC boost converter topology. That means battery voltage MUST be higher than the maximum open circuit solar panel voltage, otherwise there will be no way for the charge to terminate when the battery is full. A boost topology controller connects the solar panel directly to the battery through a diode and an inductor. This controller can increase the output voltage, but it can not reduce the voltage. So if you want to charge a 12.7V lead acid battery, for example, you're going to run into trouble terminating charge unless you've somehow managed to acquire a 15 to 19 cell panel, which is not a very common solar panel design. 19 cells will output about 12.3V max open circuit, above which this controller will thus be able to terminate charging your battery. Most standard "12V" solar panels contain 36 cells, producing about 18V, which will pass right through a boost converter and into your already fully charged 12V battery. In my bench testing of this controller, about 9.5V minimum input is required for the controller to boot up. So, there isn't much tolerance for solar panels with less than 19 cells. Below 15 cells the controller would never power itself up due to the 9.5V minimum input voltage being more than such a solar panel's max open circuit voltage. The user's manual is pretty poor, so it isn't obvious how to save your settings such that the controller powers up in the morning and automatically starts charging your batteries with correct settings. However, it IS possible to do. Watch Julian Ilett's YouTube videos about the MPT-7210A controller to see how. It would've been nice if the controller had a temperature sensor to dynamically operate the cooling fan. But at least you can adjust the fan speed setting in the user interface. You could also completely disconnect the fan wire by opening the unit up and pulling the fan connector off the mainboard. So far during my bench testing at up to 120W, my controller has not even gotten warm yet.

    Is this helpful? (0) (0)

  • By v***i

    November 29, 2017

    Product as described. Arrived on time.

    Is this helpful? (0) (0)

  • By s***g

    November 14, 2017

    Excellent product! Fast shipping!

    Is this helpful? (0) (0)

  • By n***e

    October 19, 2017

    The instructions might need improvement

    Is this helpful? (0) (0)

  • By t***7

    September 8, 2017

    Great product, quick shipping! Thank you :)

    Is this helpful? (0) (0)

  • By Jan Marino

    September 5, 2017

    Needs better instructions and has lousy output connections but works nicely once you figure it out. Charging a 24 VDC lithium Ion battery off solar panels.

    Is this helpful? (0) (0)

  • By Glenn A. Woiler

    April 22, 2017

    very nice performing charge controller.

    Is this helpful? (0) (0)

  • By toytec

    April 13, 2017

    This works very good all the telemitry

    Is this helpful? (0) (0)

  • By Kevin W. W. Atkins

    March 14, 2017

    Works great! Using it to recharge my onewheel on the go.

    Is this helpful? (0) (0)

  • By miguel marte

    March 10, 2017

     It does work. Used it on a 12 volt lead acid battery. With one 100 watts, 12 volts.

    Is this helpful? (0) (0)

  • By Stephanie Anne

    March 9, 2017

    This is the one that finally works on my 100 watt 24v solar panel charging two series 12v 35Ah batteries that power a 450 watt 110vac inverter.

    Is this helpful? (0) (0)

  • By B***i

    March 8, 2017

    thanks for such a great product!

    Is this helpful? (0) (0)

Hot Event Jeszcze

Najlepsi sprzedawcy Jeszcze

Please activate your account and then to buy,We will resend the activation email to help you complete your registration.

Recently Viewed